2021

• Fuchs J., Herrmann H., Oks SJ., Sjarov M., Franke J.:
  Increasing Efficiency in Maintenance Processes Through Modular Service Bundles
  In: Bernd-Arno Behrens, Alexander Brosius, Wolfgang Hintze, Steffen Ihlenfeldt, Jens Peter Wulfsberg (Hrsg.): Production at the leading edge of technology, Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020, Berlin, Heidelberg: Springer, 2021, S. 439-447 (Lecture Notes in Production Engineering)
  ISBN: 978-3-662-62138-7
  DOI: 10.1007/978-3-662-62138-7_44
  URL: https://link.springer.com/chapter/10.1007/978-3-662-62138-7_44
  BibTeX: Download

2020

• Backhaus C., Hoffmann GA., Reitberger T., Eiche Y., Overmeyer L., Franke J., Lindlein N.:
  Analysis of additive manufactured polymer optical waveguides: measurement and simulation of their waviness
  SPIE OPTO (San Francisco, California, United States, 1. Februar 2020 - 6. Februar 2020)
  In: García-Blanco SM, Cheben P (Hrsg.): Integrated Optics: Devices, Materials, and Technologies XXIV 2020
  DOI: 10.1117/12.2543202
  BibTeX: Download
• Bakakeu J., Kißkalt D., Franke J., Baer S., Klos HH., Peschke J.:
  Multi-Agent Reinforcement Learning for the Energy Optimization of Cyber-Physical Production Systems
  2020 IEEE Canadian Conference on Electrical and Computer Engineering, CCECE 2020 (London, ON, 30. August 2020 - 2. September 2020)
  In: Canadian Conference on Electrical and Computer Engineering 2020
  DOI: 10.1109/CCECE47787.2020.9255795
  BibTeX: Download
• Baloglu MV., Ziegler M., Franke J., Willner K.:
  Determination of equivalent transversely isotropic material parameters for sheet-layered lamination stacks
  In: Mechanical Systems and Signal Processing 145 (2020), Art.Nr.: 106915
  ISSN: 0888-3270
  DOI: 10.1016/j.ymssp.2020.106915
  BibTeX: Download
• Bauer J., Hechtel M., Konrad C., Holzwarth M., Hoffmann H., Feld T., Schneider S., Zinnikus I., Mayr A., Franke J.:
  ForeSight - An AI-driven Smart Living Platform, Approach to Add Access Control to openHAB
  18th International Conference on Smart Homes and Health Telematics, ICOST 2020 (Hammamet, 24. Juni 2020 - 26. Juni 2020)
  In: Mohamed Jmaiel, Hamdi Aloulou, Mounir Mokhtari, Bessam Abdulrazak, Slim Kallel (Hrsg.): Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) 2020
  DOI: 10.1007/978-3-030-51517-1_40
  BibTeX: Download
• Benke E., Fehrle A., Ollech J., Schrampfer S., Franke J.:
  Architecture and low power management of a deep-tissue medical implant system powered by human body energy harvesting
  13th International Conference on Biomedical Electronics and Devices, BIODEVICES 2020 - Part of 13th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2020 (Valletta, 24. Februar 2020 - 26. Februar 2020)
  In: Ye Xuesong, Ana Fred, Hugo Gamboa (Hrsg.): BIODEVICES 2020 - 13th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 13th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2020 2020
  DOI: 10.5220/0009107302270234
  BibTeX: Download
• Berg S., Köhler M., Kurz G., Schäfer F., Schwulera E.:
  Fahrplan in die Zukunft - Six Sigma weitergedacht für Business Excellence
  In: QZ Qualität und Zuverlässigkeit (2020)
  ISSN: 0720-1214
  URL: https://www.qz-online.de/qz-zeitschrift/archiv/artikel/six-sigma-weitergedacht-fuer-business-excellence-10202517.html
  BibTeX: Download
• Blank A., Berg J., Zikeli GL., Lu S., Sommer O., Reinhart G., Franke J.:
  Entstörungsstrategie für autonome mobile Roboter Intervention strategy for autonomous mobile robots
  In: wt Werkstattstechnik - Online 110 (2020), S. 601-606
  ISSN: 1436-4980
  BibTeX: Download
• Blank A., Havenith A., Kohn S., Querfurth F., Zwingel M., Metzner M., Franke J.:
  Robotic Technologies for Volume-Optimized Conditioning of Radioactive Waste – VIRERO
  9th International Conference on Nuclear Decommissioning (Aachen, Germany, 25. November 2020 - 27. November 2020)
  In: AiNT GmbH (Hrsg.): ICOND 2020 Conference Proceedings 2020
  BibTeX: Download
• Bodendorf F., Franke J.:
  Risk Assessment of Vehicle Sensor Data as a Vending Object or Service
  5th International Conference on Internet of Things, ICIOT 2020, held as part of the Services Conference Federation, SCF 2020 (Honolulu, HI, 18. September 2020 - 20. September 2020)
  In: Wei Song, Kisung Lee, Zhisheng Yan, Liang-Jie Zhang, Huan Chen (Hrsg.): Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) 2020
  DOI: 10.1007/978-3-030-59615-6_11
  BibTeX: Download
• Bodendorf F., Franke J.:
  Technology-Based Lifecycle Assessment of Software Components in Automotive Product Planning
  AHFE Virtual Conference on Production Management and Process Control, Human Aspects of Advanced Manufacturing and the Additive Manufacturing, Modeling Systems and 3D Prototyping, 2020 (San Diego, CA, 16. Juli 2020 - 20. Juli 2020)
  In: Beata Mrugalska, Stefan Trzcielinski, Waldemar Karwowski, Massimo Di Nicolantonio, Emilio Rossi (Hrsg.): Advances in Intelligent Systems and Computing 2020
  DOI: 10.1007/978-3-030-51981-0_36
  BibTeX: Download
• Bodendorf F., Hollweck B., Franke J.:
  Technologieorientierte Softwarebewertung zur Unterstützung von Beschaffungsentscheidungen
  In: Controlling 32 (2020), S. 53-61
  ISSN: 0935-0381
  DOI: 10.15358/0935-0381-2020-2-53
  URL: https://www.beck-elibrary.de/10.15358/0935-0381-2020-2-53/technologieorientierte-softwarebewertung-zur-unterstuetzung-von-beschaffungsentscheidungen-jahrgang-32-2020-heft-2?page=1
  BibTeX: Download
• Donhauser T., Endter U., Schmidt T., Baier L., Schuderer P., Franke J.:
  Echtzeitabbild der Produktion: Betriebsbegleitende Materialflusssimulation
  In: wt Werkstattstechnik - Online 110 (2020), S. 214--219
  ISSN: 1436-4980
  BibTeX: Download
• Donhauser T., Endter U., Schmidt T., Baier L., Schuderer P., Franke J.:
  Real-time image of production. Material flow simulation during operation Betriebsbegleitende materialflusssimulation echtzeitabbild der produktion
  In: wt Werkstattstechnik - Online 110 (2020), S. 214-219
  ISSN: 1436-4980
  BibTeX: Download
• Fehrle A., Benke E., Braun T., Dorscht F., Hart M., Franke J.:
  Architektur und Low-Power-Konzept für eine vernetzte Sensorplattform zur Erzeugung eines behaglichen und energieeffizienten Smart-Home-Umfeldes
  10. GMM-Fachtagung Energie Autonome Sensorsysteme EASS 2020 (Karlsruhe, 5. März 2020 - 6. März 2020)
  BibTeX: Download
• Fröhlich J., Gräf D., Franke J., Hörber J., Hedges M.:
  Customizable Capacitive Sensor System Using Printed Electronics on Window Glass
  2020 Pan Pacific Microelectronics Symposium (Kohala Coast, HI, 10. Februar 2020 - 13. Februar 2020)
  DOI: 10.23919/PanPacific48324.2020.9059446
  BibTeX: Download
• Geiger M., Bauer J., Masuch M., Franke J.:
  An Analysis of Black Energy 3, Crashoverride, and Trisis, Three Malware Approaches Targeting Operational Technology Systems
  2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (Vienna, Austria, 8. September 2020 - 11. September 2020)
  In: IEEE (Hrsg.): 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), NY, USA: 2020
  DOI: 10.1109/ETFA46521.2020.9212128
  BibTeX: Download
• Gläßel T., Masuch M., Weigelt M., Kühl A., Franke J.:
  Schlussbericht zu dem Teilvorhaben "Automatisierte Fertigungstechnologien zum Biegen, Montieren und Schalten von innovativen Formspulenwicklungen" im Verbundprojekt "PRO-E-Traktion"
  (2020)
  DOI: 10.5281/ZENODO.3691996
  BibTeX: Download
  (anderer)
• Gläßel T., Seefried J., Kühl A., Franke J.:
  Skinning of insulated copper wires within the production chain of hairpin windings for electric traction drives
  In: International Journal of Mechanical Engineering and Robotics Research 9 (2020), S. 163-169
  ISSN: 2278-0149
  DOI: 10.18178/ijmerr.9.2.163-169
  BibTeX: Download
• Gräf D., Friedlein M., Gänßmantel C., Franke J., Ischdonat N.:
  New concept for the Integration of Additive Manufactured Mechanical and Mechatronic Components in Aircraft Interior Systems
  2020 Advances in Science and Engineering Technology International Conferences (ASET) (Dubai, 4. Februar 2020 - 9. April 2020)
  DOI: 10.1109/ASET48392.2020.9118390
  BibTeX: Download
• Hefner F., Praß J., Kirchner P., Franke J.:
  Design of process parameters for the manufacturing of wrapped connections with single solid round wires using the explicit finite element analysis
  In: Procedia CIRP 91 (2020), S. 684 - 689
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.02.225
  BibTeX: Download
• Hefner F., Schmidbauer S., Franke J.:
  Pose error correction of a robot end-effector using a 3D visual sensor for control cabinet wiring
  53rd CIRP Conference on Manufacturing Systems, CMS 2020 (Chicago, IL, 1. Juli 2020 - 3. Juli 2020)
  In: Robert X. Gao, Kornel Ehmann (Hrsg.): Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.04.088
  BibTeX: Download
• Heisler P., Kuhn M., Süß-Wolf R., Franke J.:
  Innovative Solutions for the Covering Process in the Manufacturing of Wire Harnesses to Increase the Automation Degree
  2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Kapstadt, 20. Januar 2020 - 22. April 2020)
  DOI: 10.1109/ICMIMT49010.2020.9041165
  BibTeX: Download
• Herbert M., Selmaier A., Hefner F., Franke J.:
  Potenziale zur Produktionsautomatisierung. Systematische Vorgehensweise zur Identifikation von Automatisierungsprojekten
  In: wt Werkstattstechnik - Online 110 (2020), S. 597-601
  ISSN: 1436-4980
  URL: https://e-paper.vdi-fachmedien.de/webreader-v3/index.html#/2693/31
  BibTeX: Download
• Hoffmann GA., Wienke A., Reitberger T., Franke J., Kaierle S., Overmeyer L.:
  Thermoforming of planar polymer optical waveguides for integrated optics in smart packaging materials
  In: Journal of Materials Processing Technology 285 (2020), Art.Nr.: 116763
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2020.116763
  BibTeX: Download
• Kißkalt D., Mayr A., Lutz B., Rögele A., Franke J.:
  Streamlining the development of data-driven industrial applications by automated machine learning
  53rd CIRP Conference on Manufacturing Systems, CMS 2020 (Chicago, IL, 1. Juli 2020 - 3. Juli 2020)
  In: Robert X. Gao, Kornel Ehmann (Hrsg.): Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.04.009
  BibTeX: Download
• Kozasa K., Pham DHH., Hirai H., Hori K., Niwa H., Fujihara R., Matsui K., Nishikawa A., Krebs HI.:
  Electrical Stimulation to Modulate Human Ankle Impedance: Effects of Intervention on Balance Control in Quiet and Perturbed Stances
  8th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics, BioRob 2020 (New York City, NY, 29. November 2020 - 1. Dezember 2020)
  In: Proceedings of the IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics 2020
  DOI: 10.1109/BioRob49111.2020.9224274
  BibTeX: Download
• Kuhn M., Franke J.:
  Smart Manufacturing Traceability for Automotive E/E Systems enabled by Event-Driven Microservice Architecture
  2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (Cape Town, 20. Januar 2020 - 22. Januar 2020)
  DOI: 10.1109/ICMIMT49010.2020.9041240
  BibTeX: Download
• Lechler T., Fuchs J., Sjarov M., Brossog M., Selmaier A., Faltus F., Donhauser T., Franke J.:
  Introduction of a comprehensive Structure Model for the Digital Twin in Manufacturing
  DOI: 10.1109/ETFA46521.2020.9212030
  BibTeX: Download
• Lechler T., Hocke G., Geier J., Sitz S., Reinhard M., Franke J.:
  Effizientes Engineering - Durchgängiger Simulationseinsatz in der Entwicklung von Sondermaschinen
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (2020), S. 774-778
  ISSN: 0932-0482
  DOI: 10.3139/104.112457
  BibTeX: Download
• Lechler T., Krem G., Metzner M., Sjarov M., Franke J.:
  Simulation-Based Robot Placement Using a Data Farming Approach
  In: Bernd-Arno Behrens; Alexander Brosius; Wolfgang Hintze; Steffen Ihlenfeldt; Jens Peter Wulfsberg (Hrsg.): Production at the leading edge of technology, 2020, S. 419-428
  DOI: 10.1007/978-3-662-62138-7_42
  BibTeX: Download
• Lechler T., Zerreis M., Sitz S., Reinhard M., Franke J.:
  Simulation hochautomatisierter Serienproduktion - Produktivitätssteigerung im Ramp-Down
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (2020), S. 123 - 126
  ISSN: 0932-0482
  DOI: 10.3139/104.112248
  BibTeX: Download
• Lieret M., Fertsch J., Franke J.:
  Fault detection for autonomous multirotors using a redundant flight control architecture
  16th IEEE International Conference on Automation Science and Engineering, CASE 2020 (Hong Kong, HKG, 20. August 2020 - 21. August 2020)
  In: IEEE International Conference on Automation Science and Engineering 2020
  DOI: 10.1109/CASE48305.2020.9216786
  BibTeX: Download
• Lieret M., Lallinger M., Tauscher M., Franke J.:
  Localization and grasping of small load carriers with autonomous unmanned aerial vehicles
  In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics, Berlin, Heidelberg: 2020
  DOI: 10.1007/978-3-662-61755-7_22
  BibTeX: Download
• Lieret M., Lukas J., Nikol M., Franke J.:
  A lightweight, low-cost and self-diagnosing mechatronic jaw gripper for the aerial picking with unmanned aerial vehicles
  In: Procedia Manufacturing 51 (2020), S. 424-430
  ISSN: 2351-9789
  DOI: 10.1016/j.promfg.2020.10.060
  URL: https://www.sciencedirect.com/science/article/pii/S2351978920319156
  BibTeX: Download
• Lipka M., Meinel D., Müller S., Sippel E., Franke J., Vossiek M.:
  A Wireless Angle and Position Tracking Concept for Live Data Control of Advanced, Semi-Automated Manufacturing Processes
  In: Sensors (2020), S. 2589
  ISSN: 1424-8220
  DOI: 10.3390/s20092589
  BibTeX: Download
• Lomakin A., Mayr A., Graichen K., Franke J.:
  Optimization of direct winding processes based on a holistic control approach
  Electric Drives Production Conference (E-DPC) (Ludwigsburg (D), 8. Dezember 2020 - 9. Dezember 2020)
  BibTeX: Download
• Lorenz L., Hanesch F., Nieweglowski K., Eiche Y., Franke J., Hoffmann GA., Overmeyer L., Bock K.:
  3D-Opto-MID for asymmetric optical bus couplers
  8th IEEE Electronics System-Integration Technology Conference, ESTC 2020 (Tonsberg, Vestfold, 15. September 2020 - 18. September 2020)
  In: Proceedings - 2020 IEEE 8th Electronics System-Integration Technology Conference, ESTC 2020 2020
  DOI: 10.1109/ESTC48849.2020.9229840
  BibTeX: Download
• Lorenz L., Nieweglowski K., Al-Husseini Z., Neumann N., Plettemeier D., Reitberger T., Franke J., Bock K.:
  Aerosol Jet Printed Optical Waveguides for Short Range Communication
  In: Journal of Lightwave Technology 38 (2020), S. 3478-3484
  ISSN: 0733-8724
  DOI: 10.1109/JLT.2020.2983792
  BibTeX: Download
• Lutz B., Kißkalt D., Mayr A., Regulin D., Pantano M., Franke J.:
  In-situ identification of material batches using machine learning for machining operations
  In: Journal of Intelligent Manufacturing (2020)
  ISSN: 0956-5515
  DOI: 10.1007/s10845-020-01718-3
  BibTeX: Download
• Lutz B., Kißkalt D., Regulin D., Franke J.:
  AI-based Approach for Predicting the Machinability under Consideration of Material Batch Deviations in Turning Processes
  In: Procedia CIRP 93 (2020), S. 1382-1387
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.04.100
  URL: https://www.sciencedirect.com/science/article/pii/S2212827120307344?via=ihub
  BibTeX: Download
• Lutz B., Reisch R., Kißkalt D., Avci B., Regulin D., Knoll A., Franke J.:
  Benchmark of Automated Machine Learning with State-of-the-Art Image Segmentation Algorithms for Tool Condition Monitoring
  In: Procedia Manufacturing 51 (2020), S. 215-221
  ISSN: 2351-9789
  DOI: 10.1016/j.promfg.2020.10.031
  URL: https://www.sciencedirect.com/science/article/pii/S2351978920318862?via=ihub#!
  BibTeX: Download
• Mayr A., Kißkalt D., Lomakin A., Graichen K., Franke J.:
  Towards an intelligent linear winding process through sensor integration and machine learning techniques
  8th CIRP Global Web Conference – Flexible Mass Customisation (CIRPe 2020) (, 14. Oktober 2020 - 16. Oktober 2020)
  BibTeX: Download
• Meiners M., Franke J.:
  Concept of a Machine Learning supported Cross-Machine Control Loop in the Ramp-Up of Large Series Manufacturing
  2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (Cape Town, 20. Januar 2020 - 22. Januar 2020)
  DOI: 10.1109/ICMIMT49010.2020.9041239
  BibTeX: Download
• Meiners M., Mayr A., Thomsen M., Franke J.:
  Application of Machine Learning for Product Batch Oriented Control of Production Processes
  In: Procedia CIRP 93 (2020), S. 431-436
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.04.006
  BibTeX: Download
• Meiners M., Reichenstein T., Franke J., Hauenstein R.:
  Current Distribution Monitoring in Capacitor Discharge Welding
  DOI: 10.1109/ETFA46521.2020.9212054
  BibTeX: Download
• Metzner M., Krieg L., Krüger D., Ködel T., Franke J.:
  Intuitive, VR- and Gesture-based Physical Interaction with Virtual Commissioning Simulation Models
  In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics, 2020, S. 11-20
  ISBN: 9783662617540
  DOI: 10.1007/978-3-662-61755-7_2
  BibTeX: Download
• Metzner M., Utsch D., Walter M., Hofstetter C., Ramer C., Blank A., Franke J.:
  A system for human-in-the-loop simulation of industrial collaborative robot applications
  16th IEEE International Conference on Automation Science and Engineering, CASE 2020 (Hong Kong, 20. August 2020 - 21. August 2020)
  In: IEEE International Conference on Automation Science and Engineering 2020
  DOI: 10.1109/CASE48305.2020.9216766
  BibTeX: Download
• Neermann S., Steindl M., Franke J., Mayer E., Schmidt M.:
  Qualification of NIR, UV and Laser Irradiation as Alternative Photonic Sintering Methods for Printed Electronics
  2020 Pan Pacific Microelectronics Symposium, Pan Pacific 2020 (Kohala Coast, HI, 10. Februar 2020 - 13. Februar 2020)
  In: 2020 Pan Pacific Microelectronics Symposium 2020
  DOI: 10.23919/PanPacific48324.2020.9059353
  BibTeX: Download
• Praß J., Riedel J., Renz A., Franke J., Becker S.:
  Featured Highlight: Numerical Representation of the Operating Behavior of a Crossflow Friction Turbomachine
  In: Mark Seward, Ph.D. P.Eng (Hrsg.): Numerical Representation of the Operating Behavior of a Crossflow Friction Turbomachine, Ottawa, Ontario, Canada: Advances in Engineering, 2020 (General Engineering)
  URL: https://advanceseng.com/numerical-representation-operating-behavior-crossflow-friction-turbomachine/
  BibTeX: Download
  (online publication)
• Reitelshöfer S., Martin S., Nendel F., Schäfer T., Pham DHH., Franke J.:
  Accelerated aerosol-jet-printing of stretchable rGO-electrodes for stacked dielectric elastomers by using a new hybrid atomizer
  Electroactive Polymer Actuators and Devices (EAPAD) XXII 2020 (ONLINE, 27. April 2020 - 8. Mai 2020)
  In: Yoseph Bar-Cohen, Iain A. Anderson, Herbert R. Shea (Hrsg.): Proceedings of SPIE - The International Society for Optical Engineering 2020
  DOI: 10.1117/12.2558681
  BibTeX: Download
• Riedle H., Chaban R., Ghazy A., Piplat C., Dorweiler B., Franke J.:
  Experimental determination of the suture behavior of aortic tissue in comparison to 3D printed silicone modelling material
  In: Journal of the Mechanical Behavior of Biomedical Materials 112 (2020), Art.Nr.: 104033
  ISSN: 1878-0180
  DOI: 10.1016/j.jmbbm.2020.104033
  BibTeX: Download
• Riedle H., Ghazy A., Seufert A., Seitz V., Dorweiler B., Franke J.:
  Generic design of an anatomical heart model optimized for additive manufacturing with silicone
  In: Rapid Prototyping Journal (2020)
  ISSN: 1355-2546
  DOI: 10.1108/RPJ-11-2019-0283
  BibTeX: Download
• Rupp S., Müller R., Kerker S., Faltus F., Franke J.:
  Problemmanagement in Werker-Assistenz-Systemen
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (2020)
  ISSN: 0932-0482
  BibTeX: Download
• Schapher M., Koch M., Weidner D., Scholz M., Wirtz S., Mahajan A., Herrmann I., Singh J., Knopf J., Leppkes M., Schauer C., Grüneboom A., Alexiou C., Schett G., Iro H., Munoz LE., Herrmann M.:
  Neutrophil Extracellular Traps Promote the Development and Growth of Human Salivary Stones
  In: Cells 9 (2020)
  ISSN: 2073-4409
  DOI: 10.3390/cells9092139
  BibTeX: Download
• Schmidl E., Fischer E., Wenk M., Franke J.:
  Knowledge-based generation of a plant-specific reinforcement learning framework for energy reduction of production plants
  25th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2020 (Vienna, 8. September 2020 - 11. September 2020)
  In: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2020
  DOI: 10.1109/ETFA46521.2020.9211957
  BibTeX: Download
• Schmidt K., Bönig J., Beitinger G., Thielen N., Franke J.:
  Ein Ansatz zu Qualitätsvorhersage mittels intelligenter SMT-Lötstelleninspektion durch den Einsatz von Maschinellem Lernen
  EBL Fellbach (Fellbach, 18. Februar 2020 - 19. Februar 2020)
  In: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM) (Hrsg.): GMM-Fb. 94: EBL 2020 – Elektronische Baugruppen und Leiterplatten 2020
  URL: https://www.vde-verlag.de/buecher/455185/gmm-fb-94-ebl-2020-elektronische-baugruppen-und-leiterplatten.html
  BibTeX: Download
• Schmidt K., Thielen N., Voigt C., Seidel R., Franke J., Milde Y., Bonig J., Beitinger G.:
  Enhanced X-Ray Inspection of Solder Joints in SMT Electronics Production using Convolutional Neural Networks
  2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME) (Pitesti, 21. Oktober 2020 - 24. Oktober 2020)
  In: IEEE (Hrsg.): 2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME) 2020
  DOI: 10.1109/SIITME50350.2020.9292292
  BibTeX: Download
• Scholz M., Steinkamp J., Zwingel M., Hefner F., Franke J.:
  Distributed Camera Architecture for Seamless Detection and Tracking of Dynamic Obstacles
  30th CIRP Design Conference (Kruger National Park Skukuza Rest Camp, 5. Mai 2020 - 8. Mai 2020)
  In: Khumbulani Mpofu, Peter Butala (Hrsg.): Procedia CIRP Volume 91 2020
  DOI: 10.1016/j.procir.2020.02.186
  URL: https://www.sciencedirect.com/science/article/pii/S2212827120308313
  BibTeX: Download
• Schwarzer C., Hensel A., Roth F., Franke J., Kaloudis M.:
  Investigation of Pressureless Sintered Interconnections on Plasma Based Additive Copper Metallization for 3-Dimentional Ceramic Substrates for Surface Acoustic Wave Sensors in High Temperature Applications
  70th IEEE Electronic Components and Technology Conference, ECTC 2020 (Orlando, FL, 3. Juni 2020 - 30. Juni 2020)
  In: Proceedings - Electronic Components and Technology Conference 2020
  DOI: 10.1109/ECTC32862.2020.00250
  BibTeX: Download
• Schäffer E., Shafiee S., Frühwald T., Franke J.:
  A development approach towards user-centered front-ends for knowledge-based engineering configurators: a study within planning of robot-based automation solutions
  In: Proceedings of the 22nd International Configuration Workshop, 2020, S. 47-52
  Open Access: https://www.eventhelpr.com/files/events/RqdLM1Pt/attachments/proceedings-cws-2020_JEqWr6vY.pdf
  URL: https://www.researchgate.net/publication/344298661_A_development_approach_towards_user-centered_front-ends_for_knowledge-based_engineering_configurators_a_study_within_planning_of_robot-based_automation_solutions
  BibTeX: Download
• Schäffer E., Thi K., Franke J.:
  Bedarf und Konzeptvorstellung des Forschungsprojekts ROBOTOP für einen webbasierten Konfigurator für den Massenmarkt
  (2020)
  DOI: 10.13140/RG.2.2.15152.30720
  URL: https://www.researchgate.net/publication/338682435_Bedarf_und_Konzeptvorstellung_des_Forschungsprojekts_ROBOTOP_fur_einen_webbasierten_Konfigurator_fur_den_Massenmarkt
  BibTeX: Download
  (online publication)
• Seidel R., Hassan Amada M., Fuchs J., Thielen N., Schmidt K., Voigt C., Franke J.:
  Data Mining System Architecture for Industrial Internet of Things in Electronics Production
  2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME) (Pitesti, 21. Oktober 2020 - 24. Oktober 2020)
  In: IEEE (Hrsg.): 2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME) 2020
  DOI: 10.1109/SIITME50350.2020.9292282
  BibTeX: Download
• Seidel R., Leibold F., Thielen N., Franke J.:
  Prediction of the Solder Rise in Selective Wave Soldering Comparing Decision Tree and Logistic Regression
  DOI: 10.1109/ISSE49702.2020.9121028
  URL: https://ieeexplore.ieee.org/document/9121028
  BibTeX: Download
• Seidel R., Thielen N., Schmidt K., Voigt C., Franke J.:
  Development and Test of a Data Framework for Prediction of Soldering Quality in Selective Wave Soldering Applying K-Nearest Neighbors
  2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME) (Pitesti, 21. Oktober 2020 - 24. Oktober 2020)
  In: IEEE (Hrsg.): 2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME) 2020
  DOI: 10.1109/SIITME50350.2020.9292175
  BibTeX: Download
• Seidel R., Thielen N., Voigt C., Franke J.:
  Thermische Beurteilung von THT-Lötstellendesigns für die IPC-konforme Kontaktierung durch Selektivwellenlöten
  EBL 2020 (Fellbach, 18. Februar 2020 - 19. Februar 2020)
  BibTeX: Download
• Seidel R., Volland J., Thielen N., Voigt C., Franke J.:
  Experimental Investigation on Thermocouple Attachment Methods for Reliable Temperature Measurement
  ISSE 2020
  DOI: 10.1109/ISSE49702.2020.9120918
  BibTeX: Download
• Selmaier A., Martens B., Sjarov M., Kuhn M., Herbert M., Franke J.:
  Anwendung etablierter Vorgehensweisen der Softwareentwicklung in der produzierenden Industrie. Systematische Methoden - Auswahl bei der Digitalisierung
  In: wt Werkstattstechnik - Online 110 (2020), S. 226-230
  ISSN: 1436-4980
  BibTeX: Download
• Selmaier A., Martens B., Sjarov M., Kuhn M., Herbert M., Franke J.:
  Systematische Methodenauswahl bei der Digitalisierung
  In: Werkstattstechnik WT WERKSTATTSTECHNIK BD. 110 (2020) (2020), S. 226-230
  ISSN: 1436-5006
  URL: https://e-paper.vdi-fachmedien.de/werkstattstechnik/2020#01-04-2020
  BibTeX: Download
• Seßner J., Schmid M., Lauer-Schmalz M., Franke J.:
  Path Segmentation with Artificial Neural Networks in Low Structured Environments for the Navigation of Visually Impaired People
  8th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics, BioRob 2020 (New York City, NY, 29. November 2020 - 1. Dezember 2020)
  In: Proceedings of the IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics 2020
  DOI: 10.1109/BioRob49111.2020.9224324
  BibTeX: Download
• Sitz S., Lechler T., Reinhard M., Franke J.:
  Vision oder Wirklichkeit: Digitale Zwillinge in der Kunststoffindustrie
  In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen (2020), S. 32-36
  ISSN: 0032-1338
  BibTeX: Download
• Sitz S., Lechler T., Reinhard M., Franke J.:
  Vision oder Wirklichkeit: Digitale Zwillinge in der Kunststoff- und Kautschukindustrie
  In: Kgk-Kautschuk Gummi Kunststoffe (2020), S. 12-16
  ISSN: 0948-3276
  BibTeX: Download
• Sjarov M., Ceriani N., Lechler T., Franke J.:
  Building Blocks for Digitally Integrated Process Chains in PBF-Based Additive Manufacturing
  In: Bernd-Arno Behrens; Alexander Brosius; Wolfgang Hintze; Steffen Ihlenfeldt; Jens Peter Wulfsberg (Hrsg.): Production at the leading edge of technology, 2020, S. 368-377
  ISBN: 9783662621370
  DOI: 10.1007/978-3-662-62138-7_37
  BibTeX: Download
• Sjarov M., Lechler T., Fuchs J., Brossog M., Selmaier A., Faltus F., Donhauser T., Franke J.:
  The Digital Twin Concept in Industry – A Review and Systematization
  DOI: 10.1109/ETFA46521.2020.9212089
  BibTeX: Download
• Stoll T., Trautnitz P., Schmiedeke S., Franke J., Travitzky N.:
  Process development for laser powder bed fusion of pure copper
  In: Proceedings of SPIE Proceedings Volume 11271, Laser 3D Manufacturing VII; 112710I (2020) (2020)
  DOI: 10.1117/12.2563870
  BibTeX: Download
• Teske F., Fehrle A., Franke J.:
  Evaluation of the Sustainability of Decentralised Energy Systems for Domestic Applications
  2020 IEEE Electric Power and Energy Conference (Edmonton (Online), 9. November 2020 - 10. November 2020)
  BibTeX: Download
• Thielen N., Schmidt K., Seidel R., Franke J.:
  Maschinelles Lernen in der Elektronikproduktion: Herausforderungen und Anwendungsmöglichkeiten
  EBL 2020 – Elektronische Baugruppen und Leiterplatten - 10. DVS/GMM-Tagung (Fellbach, 18. Februar 2020 - 19. Februar 2020)
  In: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM) (Hrsg.): GMM-Fb. 94: EBL 2020 – Elektronische Baugruppen und Leiterplatten 2020
  BibTeX: Download
• Thielen N., Werner D., Schmidt K., Seidel R., Reinhardt A., Franke J.:
  A Machine Learning Based Approach to Detect False Calls in SMT Manufacturing
  43rd International Spring Seminar on Electronics Technology, ISSE 2020 (Demanovska Valley, 14. Mai 2020 - 15. Mai 2020)
  In: Proceedings of the International Spring Seminar on Electronics Technology 2020
  DOI: 10.1109/ISSE49702.2020.9121044
  BibTeX: Download
• Vukovic P., Lechler T., Franke J.:
  A Concept for Wireless Network Integration in Production System Planning
  25th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2020 (Vienna, AUT, 8. September 2020 - 11. September 2020)
  In: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2020
  DOI: 10.1109/ETFA46521.2020.9212023
  BibTeX: Download
• Wagner P., Hansch G., Konrad C., John KH., Bauer J., Franke J.:
  Applicability of Security Standards for Operational Technology by SMEs and Large Enterprises
  25th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2020 (Vienna, AUT, 8. September 2020 - 11. September 2020)
  In: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2020
  DOI: 10.1109/ETFA46521.2020.9212126
  BibTeX: Download
• Wang L., Silva L., Süß-Wolf R., Franke J.:
  Prediction of surface roughness of laser selective metallization of ceramics by multiple linear regression and artificial neural networks approaches
  In: Journal of Laser Applications 32 (2020)
  ISSN: 1042-346X
  DOI: 10.2351/7.0000198
  BibTeX: Download
• Weigelt M., Thoma C., Zheng E., Franke J.:
  Finite‑element‑analysis of the mechanical behavior of high‑frequency litz wire in flat coil winding
  In: Production Engineering (2020)
  ISSN: 0944-6524
  DOI: 10.1007/s11740-020-00996-3
  BibTeX: Download
• Yoo IS., Preis A., Franke J.:
  Development of a test bench for the urodynamic simulation of the lower urinary tract*
  42nd Annual International Conferences of the IEEE Engineering in Medicine and Biology Society, EMBC 2020 (Montreal, QC, Canada, 20. Juli 2020 - 24. Juli 2020)
  In: IEEE (Hrsg.): 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC) 2020
  DOI: 10.1109/EMBC44109.2020.9176198
  URL: https://ieeexplore.ieee.org/document/9176198
  BibTeX: Download
• Zwingel M., Herbert M., Lieret M., Schuderer P., Franke J.:
  An Economic Solution for Localization of Autonomous Tow Trucks in a Mixed Indoor and Outdoor Environment Using a Node Based Approach
  In: Production at the leading edge of technology, Springer, Berlin, Heidelberg, 2020, S. 457-466
  ISBN: 9783662621370
  DOI: 10.1007/978-3-662-62138-7_46
  BibTeX: Download

2019

• Agarwal R., Bergbreiter S.:
  Measurement of shear forces during gripping tasks with a low-cost tactile sensing system
  2019 IEEE International Conference on Soft Robotics, RoboSoft 2019 (Seoul, 14. April 2019 - 18. April 2019)
  In: RoboSoft 2019 - 2019 IEEE International Conference on Soft Robotics 2019
  DOI: 10.1109/ROBOSOFT.2019.8722774
  BibTeX: Download
• Ankenbrand M., Eiche Y., Franke J.:
  Programming and evaluation of a multi-Axis/multi-process manufacturing system for mechatronic integrated devices
  2019 International Conference on Electronics Packaging, ICEP 2019 (Niigata, 17. April 2019 - 20. April 2019)
  In: 2019 International Conference on Electronics Packaging, ICEP 2019 2019
  DOI: 10.23919/ICEP.2019.8733548
  BibTeX: Download
• Backhaus C., Lindlein N., Zeitler JT., Franke J.:
  Beeinflussung der optischen Eigenschaften von Polymer Optischen Wellenleitern durch das Druckpfad-Design
  120. Jahrestagung der Deutschen Gesellschaft für angewandte Optik (Darmstadt, 11. Juni 2019 - 15. Juni 2019)
  In: DGaO Proceedings 2019
  Open Access: https://www.dgao-proceedings.de/download/120/120_p32.pdf
  URL: https://www.dgao-proceedings.de/
  BibTeX: Download
• Backhaus C., Vögl C., Zeitler JT., Reitberger T., Lindlein N., Franke J.:
  Optical simulations of printed Polymer Optical Waveguides (POWs): search for their optical limitations caused by fabrication and application geometry
  In: 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference 2019
  BibTeX: Download
• Baier L., Frommherz J., Nöth E., Donhauser T., Schuderer P., Franke J.:
  Identifying failure root causes by visualizing parameter interdependencies with spectrograms
  In: Journal of Manufacturing Systems 53 (2019), S. 11-17
  ISSN: 0278-6125
  DOI: 10.1016/j.jmsy.2019.08.002
  BibTeX: Download
• Bakakeu J., Brossog M., Zeitler JT., Franke J., Tolksdorf S., Klos H., Peschke J.:
  Automated reasoning and knowledge inference on OPC UA information models
  2019 IEEE International Conference on Industrial Cyber Physical Systems, ICPS 2019 (Taipei, 6. Mai 2019 - 9. Mai 2019)
  In: Proceedings - 2019 IEEE International Conference on Industrial Cyber Physical Systems, ICPS 2019 2019
  DOI: 10.1109/ICPHYS.2019.8780114
  BibTeX: Download
• Bauer J., Hoffmann H., Feld T., Runge M., Hinz O., Mayr A., Förster K., Teske F., Schäfer F., Konrad C., Franke J.:
  ForeSight - Platform Approach for Enabling AI-based Services for Smart Living
  17th International Conference on Smart Living and Public Health, ICOST 2019 (New York City, NY, 14. Oktober 2019 - 16. Oktober 2019)
  In: José Pagán, Mounir Mokhtari, Hamdi Aloulou, Bessam Abdulrazak, María Fernanda Cabrera (Hrsg.): How AI Impacts Urban Living and Public Health 2019
  DOI: 10.1007/978-3-030-32785-9_19
  URL: https://link.springer.com/chapter/10.1007/978-3-030-32785-9_19
  BibTeX: Download
• Bauer J., Kettschau AK., Fehrle A.:
  Anwendungsbeispiel: Servicerobotik im Haushalt
  In: Rainer Müller, Jörg Franke, Dominik Henrich, Bernd Kuhlenkötter, Annika Raatz, Alexander Verl (Hrsg.): Handbuch Mensch-Roboter Kollaboration, Hanser, 2019, S. 412-417
  ISBN: 978-3-446-45016-5
  URL: https://www.hanser-fachbuch.de/buch/Handbuch+Mensch+Roboter+Kollaboration/9783446450165
  BibTeX: Download
• Benenson Z., Berger F., Cherepantsev A., Datsevich S., Do L., Eckert M., Elsberger T., Freiling F., Frinken M., Glameyer H., Hafner S., Hagenhoff S., Hammer A., Hammerl S., Hantke F., Heindorf F., Henninger M., Höfer D., Kuhrt P., Lattka M., Leis T., Leubner C., Leyrer K., Lindenmeier C., Del Medico K., Moussa D., Nissen M., Öz A., Ottmann J., Reif K., Ripley N., Roth A., Schilling J., Schleicher R., Schulz D., Stephan M., Volkert C., Wehner M., Wild M., Wirth J., Wolf J., Wunder J., Zlatanovic J.:
  Analyse verbreiteter Anwendungen zum Lesen von elektronischen Büchern
  CS-2019-06 (2019)
  Open Access: http://nbn-resolving.de/urn:nbn:de:bvb:29-opus4-125519
  URL: http://nbn-resolving.de/urn:nbn:de:bvb:29-opus4-125519
  BibTeX: Download
  (Techreport)
• Blank A.:
  Sensortechnik: Akustische Sensoren Sensortechnik: Positions-, Weg- und Winkelmessung
  In: Rainer Müller, Jörg Franke, Dominik Henrich, Bernd Kuhlenkötter, Annika Raatz, Alexander Verl (Hrsg.): Handbuch Mensch-Roboter-Kollaboration, München: Carl Hanser Verlag, 2019, S. 83-85; 108-109
  ISBN: 978-3-446-46023-2
  URL: https://www.hanser-fachbuch.de/buch/Handbuch+Mensch+Roboter+Kollaboration/9783446450165
  BibTeX: Download
• Blank A., Hiller M., Zhang S., Leser A., Metzner M., Lieret M., Thielecke J., Franke J.:
  6DoF Pose-Estimation Pipeline for Texture-less Industrial Components in Bin Picking Applications
  2019 European Conference on Mobile Robots (ECMR) (Prag, 4. September 2019 - 30. August 2019)
  In: Conference Proceedings 2019
  DOI: 10.1109/ECMR.2019.8870920
  BibTeX: Download
• Bodendorf F., Franke J.:
  Risk Assessment of Data Transfer Between Partners in the Automotive Supply Chain
  Logistik Management 2019 (Halle (Saale), 18. September 2019 - 20. September 2019)
  In: Book of Abstracts - 11th Logistics Management 2019
  URL: https://lm2019.uni-halle.de/files/2019/09/boa-15.pdf
  BibTeX: Download
• Bodendorf F., Franke J.:
  Machine Learning Based Cost Engineering of Automotive Parts – Lessons Learned
  First International Symposium on Applied Artificial Intelligence (ISAAI) (Munich, 20. November 2019 - 21. November 2019)
  In: Digitale Welt Convention (Hrsg.): Digitale Welt 4, 60, Switzerland: 2019
  DOI: 10.1007/s42354-019-0234-3
  BibTeX: Download
• Bodendorf F., Franke J.:
  Practices and Trends of Evaluating Software Prices in Procurement - An Empirical Study
  Clute International Academic Conferences (Las Vegas, 13. Oktober 2019 - 16. Oktober 2019)
  In: Clute Institute (Hrsg.): Conference Proceedings 2019
  Open Access: https://www.cluteinstitute.com/conference-proceedings
  URL: https://www.cluteinstitute.com/conference-proceedings/lv19proceedings.pdf
  BibTeX: Download
• Bodendorf F., Meissner T., Franke J.:
  Valuating and Pricing of Vehicle Generated Data as a Marketable Product in the Automotive Industry
  The Eighth International Conference on Advances in Vehicular Systems, Technologies and Applications VEHICULAR 2019 (Rom, 30. Juni 2019 - 4. Juli 2019)
  In: Murata Y, Menouar H (Hrsg.): Vehicular 2019: The Eighth International Conference on Advances in Vehicular Systems, Technologies and Applications 2019
  Open Access: http://thinkmind.org/index.php?view=instance&instance=VEHICULAR+2019
  URL: http://thinkmind.org/index.php?view=instance&instance=VEHICULAR+2019
  BibTeX: Download
• Bodendorf F., Merbele S., Franke J.:
  Predictive Cost Analytics of Vehicle Assemblies Based on Machine Learning in the Automotive Industry
  2019 Pre-ICIS SIGDSA Symposium (München)
  In: AIS eLibrary (Hrsg.): Proceedings of the 2019 Pre-ICIS SIGDSA Symposium 2019
  URL: https://aisel.aisnet.org/sigdsa2019/25
  BibTeX: Download
• Braun T., Franke J.:
  Baustoff-integrierte Flächenheizung (BiFH): Abschlussbericht
  Stuttgart: Fraunhofer IRB Verlag, 2019
  (Forschungsinitiative Zukunft Bau, Bd.F 3177)
  ISBN: 3738803963
  Open Access: https://www.irbnet.de/daten/rswb/19089016129.pdf
  URL: https://www.irbnet.de/daten/rswb/19089016129.pdf
  BibTeX: Download
• Brossog M., Schäffer E.:
  Prozesssimulation
  In: Müller, Rainer; Franke, Jörg; Henrich, Dominik; Kuhlenkötter, Bernd; Raatz, Annika; Verl, Alexander (Hrsg.): Handbuch Mensch-Roboter-Kollaboration, München: Carl Hanser Verlag, 2019, S. 284-297
  ISBN: 978-3-446-45016-5
  BibTeX: Download
• Bräuer P., Kuhn T., Müller M., Franke J.:
  Reliability of Molded Interconnect Devices regarding Crack Initiation and Overmolding
  International Spring Seminar on Electronics Technology, ISSE 2019 -- 2019 42th International Spring Seminar (Wroclaw, 15. Mai 2019 - 19. Mai 2019)
  In: 2019 42ND INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), NEW YORK: 2019
  DOI: 10.1109/ISSE.2019.8810264
  URL: https://ieeexplore.ieee.org/document/8810264
  BibTeX: Download
• Böhm R., Steglich M., Rehtanz C., Paulsburg M., Datsevich S., Brunner B., Franke J.:
  Control of a Hybrid Energy Storage System for a Hybrid Compensation System
  In: Chemical Engineering & Technology (2019)
  ISSN: 0930-7516
  DOI: 10.1002/ceat.201800652
  BibTeX: Download
• Donhauser T., Kißkalt D., Mayr A., Scholz M., Schuderer P., Franke J.:
  Integration maschineller Lernverfahren in eine Materialflusssimulation zur Verhaltensabstraktion und -vorhersage komplexer Fertigungssysteme
  In: Putz, Matthias; Schlegel, Andreas (Hrsg.): ASIM 2019 - Simulation in Produktion und Logistik, Auerbach /Vogtl.: Wissenschaftliche Scripten, 2019, S. 19-28
  ISBN: 978-3-95735-113-5
  URL: http://www.asim-fachtagung-spl.de/asim2019/papers/02_Proof_156.pdf
  BibTeX: Download
• Donhauser T., Mayr A., Baier L., Franke J.:
  Verfolgung von Bauteil- und Anlagentemperaturen in Produktionssystemen zur Energiesimulation bei thermischen Einflussfaktoren
  In: Putz M, Schlegel A (Hrsg.): ASIM 2019 - Simulation in Produktion und Logistik, Auerbach /Vogtl.: Wissenschaftliche Scripten, 2019, S. 163--172
  ISBN: 978-3-95735-113-5
  URL: http://www.asim-fachtagung-spl.de/asim2019/papers/16_Proof_173.pdf
  BibTeX: Download
• Fuchs J., Hartner F., Brossog M., Franke J.:
  Auswahl industrieller Serviceplattformen
  In: wt Werkstattstechnik - Online (2019)
  ISSN: 1436-4980
  Open Access: https://www.werkstattstechnik.de/wt/get_article.php?data[article_id]=92101
  URL: https://www.werkstattstechnik.de/wt/get_article.php?data[article_id]=92101
  BibTeX: Download
• Fuchs J., Hartner F., Brossog M., Franke J.:
  Auswahl industrieller Serviceplattformen - Methodisches Vorgehen zur Auswahl geeigneter cloudbasierter IIoT-Plattformlösungen
  In: wt Werkstattstechnik - Online 109 (2019), S. 537-542
  ISSN: 1436-4980
  BibTeX: Download
• Fuchs J., Oks SJ., Franke J.:
  Platform-based service composition for manufacturing: A conceptualization
  In: Procedia CIRP 81 (2019), S. 541-546
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2019.03.152
  URL: https://www.sciencedirect.com/science/article/pii/S2212827119304573
  BibTeX: Download
• Fuchs J., Schmidt J., Franke J., Rehman K., Karnouskos S., Sauer M.:
  I4.0-compliant integration of assets utilizing the Asset Administration Shell
  2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (Zaragoza, 10. September 2019 - 13. September 2019)
  DOI: 10.1109/ETFA.2019.8869255
  BibTeX: Download
• Gläßel T., Bachinski Pinhal D., Masuch M., Gerling D., Franke J.:
  Manufacturing Influences on the Motor Performance of Traction Drives with Hairpin Winding
  9th IEEE Electric Drives Production Conference (E|DPC) (Esslingen, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011872
  BibTeX: Download
• Gläßel T., Seefried J., Kühl A., Franke J.:
  Skinning of Insulated Copper Wires within the Production Chain of Hairpin Windings for Electric Traction Drives
  Asia Conference on Material and Manufacturing Technology [ACMMT 2018] (Beijing, 14. September 2018 - 16. September 2018)
  In: International Journal of Mechanical Engineering and Robotics Research 2019
  BibTeX: Download
• Gläßel T., Seefried J., Masuch M., Riedel A., Mayr A., Kühl A., Franke J.:
  Process Reliable Laser Welding of Hairpin Windings for Automotive Traction Drives
  IEEE International Conference on Engineering, Science, and Industrial Applications (ICESI) (Tokyo, Japan, 22. August 2019 - 24. August 2019)
  DOI: 10.1109/ICESI.2019.8863004
  URL: https://ieeexplore.ieee.org/document/8863004
  BibTeX: Download
• Hamilton DP., Syed Khaja AH., Franke J., Mawby P.:
  High temperature thermal cycling reliability of silver sintered and electroplated tin based transient liquid phase joints
  9th International Conference on Integrated Power Electronics Systems, CIPS 2016 (Nuremberg, 8. März 2016 - 10. März 2016)
  In: CIPS 2016 - 9th International Conference on Integrated Power Electronics Systems 2019
  BibTeX: Download
• Hefner F., Herbert M., Sjarov M., Süß-Wolf R., Franke J.:
  Robot-based automated production of wrapped connections with single solid round wires
  In: Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens (Hrsg.): Production at the leading edge of technology, Springer, 2019, S. 431-439
  ISBN: 9783662604168
  DOI: 10.1007/978-3-662-60417-5_43
  BibTeX: Download
• Heisler P., Gick S., Franke J.:
  Innovative trennmittelarme Fertigungskonzepte für die Schaumteilherstellung in der Serienfertigung
  In: Werkstoffe in der Fertigung (2019), S. 24-26
  ISSN: 0939-2629
  BibTeX: Download
• Heuss L., Blank A., Dengler S., Zikeli GL., Reinhart G., Franke J.:
  Modular Robot Software Framework for the Intelligent and Flexible Composition of Its Skills
  Advances in Production Management Systems (APMS) (Austin, Texas, 1. September 2019 - 5. September 2019)
  In: Ameri, Farhad; Stecke, Kathryn E.; Cieminski, Gregor von; Kiritsis, Dimitris (Hrsg.): Advances in Production Management Systems. Production Management for the Factory of the Future, Cham: 2019
  DOI: 10.1007/978-3-030-30000-5_32
  BibTeX: Download
• Hiller M., Qiu C., Particke F., Hofmann C., Thielecke J.:
  Learning Topometric Semantic Maps from Occupancy Grids
  IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Macau, PEOPLES R CHINA, 4. November 2019 - 8. November 2019)
  In: 2019 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), NEW YORK: 2019
  BibTeX: Download
• Hoffmann C., Praß J., Uhlemann T., Franke J.:
  Improving the energy efficiency of industrial drying processes: a computational fluid dynamics approach
  In: Procedia Manufacturing 33 (2019), S. 422 - 429
  ISSN: 2351-9789
  DOI: 10.1016/j.promfg.2019.04.052
  URL: https://www.sciencedirect.com/science/article/pii/S2351978919305293
  BibTeX: Download
• Huber F., Papke T., Kerkien M., Tost F., Geyer G., Merklein M., Schmidt M.:
  Customized exposure strategies for manufacturing hybrid parts by combining laser beam melting and sheet metal forming
  In: Journal of Laser Applications (2019)
  ISSN: 1042-346X
  DOI: 10.2351/1.5096115
  BibTeX: Download
• Javied T., Deutsch M., Franke J.:
  A model for integrating energy management in lean production
  29th CIRP Design Conference, CIRP Design 2019 (Povoa de Varzim, 8. Mai 2019 - 10. Mai 2019)
  In: Goran D. Putnik (Hrsg.): Procedia CIRP 2019
  DOI: 10.1016/j.procir.2019.04.252
  BibTeX: Download
• Javied T., Huprich S., Franke J.:
  Cloud based Energy Management System Compatible with the Industry 4.0 Requirements
  13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Oshawa, CANADA, 12. August 2019 - 14. August 2019)
  In: IFAC PAPERSONLINE, AMSTERDAM: 2019
  DOI: 10.1016/j.ifacol.2019.10.018
  BibTeX: Download
• Kuhn M., Nguyen HG., Otten H., Franke J.:
  Blockchain Enabled Traceability – Securing Process Quality in Manufacturing Chains in the Age of Autonomous Driving
  IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD) (Marrakesch, 21. November 2018 - 23. November 2018)
  In: IEEE (Hrsg.): 2018 IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD) 2019
  DOI: 10.1109/ITMC.2018.8691242
  BibTeX: Download
• Kühl A., Riedel A., Gläßel T., Masuch M., Franke J.:
  Robot-based Production of Electric Motors with Hairpin Winding Technolgy
  International Conference on Intelligent Automation (ICIAR) 2019 (San Francisco, 22. Oktober 2019 - 24. Oktober 2019)
  In: Limited N (Hrsg.): International Conference on Intelligent Automation and Robotics (ICIAR'19) 2019
  BibTeX: Download
• Kühl A., Zitzelsberger M., Seefried J., Masuch M., Miller T., Franke J.:
  Hot crimping through innovative inductive heating in the production of electric motors
  11th IEEE International Electric Machines and Drives Conference, IEMDC 2019 (San Diego, CA, USA, 12. Mai 2019 - 15. Mai 2019)
  In: 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019 2019
  DOI: 10.1109/IEMDC.2019.8785316
  BibTeX: Download
• Lechler T., Fischer E., Metzner M., Mayr A., Franke J.:
  Virtual Commissioning – Scientific review and exploratory use cases in advanced production systems
  In: Procedia CIRP 81 (2019), S. 1125–1130
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2019.03.278
  URL: https://www.sciencedirect.com/science/article/pii/S2212827119305839
  BibTeX: Download
• Lichtblau J., Lurz F., Weigel R., Kölpin A.:
  Measurements for Onboard Communication in a High-Speed Train up to 330 km/h for Selected Scenarios at 2.45 GHz
  2019 IEEE Radio and Wireless Symposium (RWS) (Orlando, FL, 20. Januar 2019 - 23. Januar 2019)
  In: IEEE (Hrsg.): 2019 IEEE Radio and Wireless Symposium (RWS) 2019
  DOI: 10.1109/RWS.2019.8714281
  BibTeX: Download
• Lieret M., Kogan V., Döll S., Franke J.:
  Automated in-house transportation of small load carriers with autonomous unmanned aerial vehicles
  CASE 2019 - International Conference on Automation Science and Engineering (University of British Columbia, Vancouver, BC, Canada, 22. August 2019 - 26. September 2019)
  In: 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE) 2019
  DOI: 10.1109/COASE.2019.8843183
  URL: https://ieeexplore.ieee.org/document/8843183
  BibTeX: Download
• Liverani L., Amir F., Raffel N., Preis A., Hoffmann I., Boccaccini AR., Beckmann M., Dittrich R.:
  Electrospun patterned porous scaffolds for the support of ovarian follicles growth: a feasibility study
  In: Scientific Reports 9 (2019), Art.Nr.: 1150
  ISSN: 2045-2322
  DOI: 10.1038/s41598-018-37640-1
  BibTeX: Download
• Lomakin K., Ankenbrand M., Sippel M., Franke J., Helmreich K., Gold G.:
  Nanojet 3D Printed Coplanar Waveguides on Flexible Polyimide Substrate up to 24 GHz
  1st IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS 2019) (Glasgow, 7. Juli 2019 - 10. Juli 2019)
  BibTeX: Download
• Lorenz L., Ott L., Nieweglowski K., Reitberger T., Franke J., Bock K.:
  Evaluation of the coupling performance and long-term stability of aerosol jet printed and photolithographic manufactured waveguides for asymmetric optical bus couplers
  Optical Interconnects XIX 2019 (San Francisco, CA, 5. Februar 2019 - 7. Februar 2019)
  In: Ray T. Chen, Henning Schroder (Hrsg.): Proceedings of SPIE - The International Society for Optical Engineering 2019
  DOI: 10.1117/12.2506598
  BibTeX: Download
• Lutz B., Kißkalt D., Regulin D., Reisch R., Schiffler A., Franke J.:
  Evaluation of Deep Learning for Semantic Image Segmentation in Tool Condition Monitoring
  2019 18th IEEE International Conference On Machine Learning And Applications (ICMLA) (Boca Raton, Florida)
  In: 2019 18th IEEE International Conference On Machine Learning And Applications (ICMLA) 2019
  DOI: 10.1109/ICMLA47014.2019
  BibTeX: Download
• Mahr A., Mayr A., Jung T., Franke J.:
  Robot-assisted concept for assembling form coils in laminated stator cores of large electric motors
  In: Procedia Manufacturing 38 (2019), S. 866-875
  ISSN: 2351-9789
  DOI: 10.1016/j.promfg.2020.01.168
  URL: https://www.sciencedirect.com/science/article/pii/S2351978920301694
  BibTeX: Download
• Masuch M., von Lindenfels J., Seefried J., Mayr A., Schneider M., Weigelt M., Kühl A., Franke J., Hemmer C.:
  Comparison of Additive Balancing Processes for Rotors in the Context of High Speed Electric Traction Motors
  2019 9th International Electric Drives Production Conference (E|DPC) (Esslingen, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9012036
  URL: https://ieeexplore.ieee.org/document/9012036/
  BibTeX: Download
• Mayr A., Dietze S., Herzog T., Schäffer E., Schäfer F., Bauer J., Fuchs J., Franke J.:
  Knowledge-based Support of the Production System Design by Semantic Technologies Using the Example of the Electric Motor Production
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011874
  URL: https://ieeexplore.ieee.org/document/9011874
  BibTeX: Download
• Mayr A., Kißkalt D., Meiners M., Lutz B., Schäfer F., Seidel R., Selmaier A., Fuchs J., Metzner M., Blank A., Franke J.:
  Machine Learning in Production – Potentials, Challenges and Exemplary Applications
  7th CIRP Global Web Conference – Towards shifted production value stream patterns through inference of data, models, and technology (CIRPe 2019) (Online, 16. Oktober 2019 - 18. Oktober 2019)
  In: Procedia CIRP 2019
  DOI: 10.1016/j.procir.2020.01.035
  URL: https://www.sciencedirect.com/science/article/pii/S2212827120300445?via=ihub
  BibTeX: Download
• Mayr A., Lechler T., Donhauser T., Metzner M., Schäffer E., Fischer E., Franke J.:
  Advances in energy-related plant simulation by considering load and temperature profiles in discrete event simulation
  In: Procedia CIRP 81 (2019), S. 1325-1330
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2019.04.021
  URL: https://www.sciencedirect.com/science/article/pii/S2212827119306353
  BibTeX: Download
• Mayr A., Lutz B., Weigelt M., Gläßel T., Seefried J., Kißkalt D., Franke J.:
  Elektromotorenproduktion 4.0: Potenziale des maschinellen Lernens in der Elektromotorenproduktion am Beispiel des Laserschweißens von Hairpins
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 114 (2019), S. 145-149
  ISSN: 0932-0482
  DOI: 10.3139/104.112051
  URL: https://www.hanser-elibrary.com/doi/abs/10.3139/104.112051
  BibTeX: Download
• Mayr A., Masuch M., Kühl A.:
  Innovations for the electric motor production of tomorrow: From new process technologies, automation solutions through to Industry 4.0 approaches
  In: Automobiltechnologie in Bayern + e-Car 2019 (2019), S. 36-39
  URL: https://media-mind.info/pdf/2019/automobil_engl_2019.pdf
  BibTeX: Download
• Mayr A., Masuch M., Kühl A.:
  Innovationen für die Elektromotorenproduktion von morgen: Von neuen Prozesstechnologien, Automatisierungslösungen bis hin zu Industrie 4.0-Ansätzen
  In: Automobiltechnologie in Bayern + e-Car 2019 (2019), S. 44-47
  URL: https://media-mind.info/pdf/2019/automobil_deutsch_2019.pdf
  BibTeX: Download
• Mayr A., Seefried J., Ziegler M., Masuch M., Mahr A., von Lindenfels J., Meiners M., Kißkalt D., Metzner M., Franke J.:
  Machine Learning in Electric Motor Production - Potentials, Challenges and Exemplary Applications
  2019 9th International Electric Drives Production Conference (E|DPC) (Esslingen, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011861
  URL: https://ieeexplore.ieee.org/document/9011861/
  BibTeX: Download
• Meiners M., Mayr A., Lechler T., Franke J.:
  Accelerated Production Ramp-Up Utilising Clustering and Visualisation of Process Chain Interrelationships
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011827
  URL: https://ieeexplore.ieee.org/document/9011827
  BibTeX: Download
• Meinhardt M., Endres M., Graf M., Lechner M., Merklein M.:
  Analysing resistance element welding with upset auxiliary joining steel-elements under shear load
  18th International Conference on Sheet Metal, SHEMET 2019 (Leuven, 15. April 2019 - 17. April 2019)
  In: Joost R. Duflou, Yannick Carette, Livan Fratini, Fabrizio Micari, Marion Merklein, Hinnerk Hagenah (Hrsg.): Procedia Manufacturing 2019
  DOI: 10.1016/j.promfg.2019.02.145
  BibTeX: Download
• Metzner M.:
  Virtual Reality Unterstützung in der Simulation von Robotersystemen
  Digitaler Zwilling und digitaler Schatten: Von der Produktidee bis zum täglichen Einsatz (Erlangen, 10. Juli 2019 - 11. Juli 2019)
  BibTeX: Download
• Metzner M.:
  Flexible Automatisierung in der Elektronikmontage mithilfe von MRK-Systemen
  In: Müller, Rainer; Franke, Jörg; Henrich, Dominik; Kuhlenkötter, Bernd; Raatz, Annika; Verl, Alexander (Hrsg.): Handbuch Mensch-Roboter-Kollaboration, München: Carl Hanser Verlag, 2019
  ISBN: 978-3-446-45016-5
  BibTeX: Download
• Metzner M., Albrecht F., Handwerker A.:
  Flexible Automation in High-Variant Electronics Production through Digital Planning of Advanced Hybrid Robot Systems
  European Robotics Forum 2019 (ERF2019) (Bukarest, 20. März 2019 - 22. März 2019)
  BibTeX: Download
• Metzner M., Barth F., Bönig J., Franke J.:
  Methodology for digital planning and virtual validation of retroactively automated assembly systems
  In: Schüppstuhl T., Tracht K., Roßmann J. (Hrsg.): Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter, Berlin, Heidelberg: Springer Vieweg, 2019, S. 148-157
  ISBN: 978-3-662-59316-5
  DOI: 10.1007/978-3-662-59317-2_15
  URL: https://link.springer.com/chapter/10.1007/978-3-662-59317-2_15
  BibTeX: Download
• Metzner M., Fiebag D., Mayr A., Franke J.:
  Automated Optical Inspection of Soldering Connections in Power Electronics Production Using Convolutional Neural Networks
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011820
  URL: https://ieeexplore.ieee.org/document/9011820
  BibTeX: Download
• Metzner M., Heinlein P., Wytopil B., Donhauser T., Franke J.:
  Evaluation der virtuellen Absicherung hybrider Montagesysteme mittels Kinematik- und Ergonomiesimulationswerkzeugen
  In: Putz M, Schlegel A (Hrsg.): ASIM 2019, Auerbach /Vogtl.: Wissenschaftliche Scripten, 2019, S. 203--212
  ISBN: 978-3-95735-113-5
  BibTeX: Download
• Metzner M., Krieg L., Merhof J., Ködel T., Franke J.:
  Intuitive Interaction with Virtual Commissioning of Production Systems for Design Validation
  In: Procedia CIRP 84 (2019), S. 892-895
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2019.08.004
  BibTeX: Download
• Metzner M., Weissert S., Karlidag E., Albrecht F., Blank A., Mayr A., Franke J.:
  Virtual Commissioning of 6 DoF Pose Estimation and Robotic Bin Picking Systems for Industrial Parts
  In: IFAC-PapersOnLine 52 (2019), S. 160-164
  ISSN: 2405-8963
  DOI: 10.1016/j.ifacol.2019.10.040
  URL: https://www.sciencedirect.com/science/article/pii/S240589631930895X
  BibTeX: Download
• Meyer T., Kuhn M., Hartmann E.:
  Blockchain technology enabling the Physical Internet: A synergetic application framework
  In: Computers & Industrial Engineering 136 (2019), S. 5-17
  ISSN: 0360-8352
  DOI: 10.1016/j.cie.2019.07.006
  BibTeX: Download
• Ochmann J., Laumer S., Franke J.:
  The power of knowledge: A literature review on socio-technical perspectives on organizational knowledge management
  Proceedings of the 2019 Americas Conference on Information Systems (Cancun, Mexico)
  In: Americas Conference on Information Systems (AMCIS) (Hrsg.): Proceedings of the 2019 Americas Conference on Information Systems 2019
  BibTeX: Download
• Praß J., Riedel J., Renz A., Franke J., Becker S.:
  Numerical representation of the operating behavior of a cross‐flow friction turbomachine
  In: Chemical Engineering & Technology 42 (2019), S. 1853-1860
  ISSN: 0930-7516
  DOI: 10.1002/ceat.201800655
  BibTeX: Download
• Praß J., Wannemacher H., Franke J., Becker S.:
  The Influence of Different Arrangements of Shallow Dimples on the Resistance of Plates Subjected to Relative Fluid Motion
  In: Technische Mechanik 39 (2019), S. 39 - 50
  ISSN: 0232-3869
  DOI: 10.24352/UB.OVGU-2019-005
  BibTeX: Download
• Reissenweber L., Stadler A., von Lindenfels J., Franke J.:
  Improved thermal behavior of an electromagnetic linear actuator with different winding types and the influence on the complex impedance
  9th International Electric Drives Production Conference, EDPC 2019 (Esslingen, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference, EDPC 2019 - Proceedings 2019
  DOI: 10.1109/EDPC48408.2019.9011875
  BibTeX: Download
• Reitberger T., Zeitler JT., Backhaus C., Hoffmann GA., Wienke A., Lorenz L., Bock K., Wolter KJ., Suttmann O., Overmeyer L., Lindlein N., Franke J.:
  Modeling, Simulation and Manufacturing of Polymer Optical Waveguides by Using the OPTAVER Process
  Applied Industrial Optics: Spectroscopy, Imaging and Metrology 2019
  DOI: 10.1364/AIO.2019.T2A.1
  BibTeX: Download
• Riedel A., Roessert A., Kühl A., Franke J.:
  Calculation of the Copper Filling Factor of Electric Traction Drives including Graphical Representation
  22nd International Conference on Electrical Machines and Systems, ICEMS 2019 (Harbin, 11. August 2019 - 14. August 2019)
  In: 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019 2019
  DOI: 10.1109/ICEMS.2019.8922428
  BibTeX: Download
• Riedle H., Braunias K., Mukai B., Franke J.:
  Experimental Mechanical Examination of Artificial 3D Printed and Post Processed Vascular Silicone Models *
  In: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) 2019
  DOI: 10.1109/EMBC.2019.8856888
  BibTeX: Download
• Riedle H., Burkhardt AE., Seitz V., Pachaly B., Reid RR., Lee JC., Franke J.:
  Design and fabrication of a generic 3D-printed silicone unilateral cleft lip and palate model
  In: Journal of Plastic Reconstructive and Aesthetic Surgery (2019)
  ISSN: 1748-6815
  DOI: 10.1016/j.bjps.2019.06.030
  BibTeX: Download
• Riedle H., Lee JC., Franke J.:
  Letter of Response Re: Design and fabrication of a generic 3D printed silicone unilateral CLP model
  In: Journal of Plastic Reconstructive and Aesthetic Surgery (2019)
  ISSN: 1748-6815
  DOI: 10.1016/j.bjps.2019.11.037
  BibTeX: Download
• Scholz M.:
  Anwendungsbeispiel: Intralogistik
  In: Rainer Müller, Jörg Franke, Dominik Henrich, Bernd Kuhlenkötter, Annika Raatz, Alexander Verl (Hrsg.): Handbuch Mensch-Roboter-Kollaboration, München: Carl Hanser Verlag, 2019, S. 399 - 404
  ISBN: 978-3-446-46023-2
  BibTeX: Download
• Scholz M.:
  Intralogistics Execution System mit integrierten autonomen, servicebasierten Transportentitäten
  Erlangen: FAU University Press, 2019
  (FAU Studien aus dem Maschinenbau, Bd.331)
  ISBN: 978-3-96147-237-6
  BibTeX: Download
• Scholz M., Degel M., Franke J.:
  Distributed Software Architecture for Type-Specific AGV Routing
  4. Kongresses Montage Handhabung Industrieroboter
  In: Schüppstuhl T., Tracht K., Roßmann J (Hrsg.): Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter, Berlin, Heidelberg: 2019
  DOI: 10.1007/978-3-662-59317-2_6
  BibTeX: Download
• Scholz M., Franke J.:
  Servicebasierte Auftragsallokation
  In: Handling (2019), S. 6 - 7
  ISSN: 0936-7365
  BibTeX: Download
• Scholz M., Kühl A., Höft A., Landgraf M., Schneider M., Böhm R., Badel G., Lothes G., Angerer K., Hohmann A., Simon P., Konwitschny F., Scharmer V., Deß T., Mehlmann G., Veerashekar K.:
  StroMiS - Studie zur technisch-wirtschaftlichen Analyse der Stromerzeugung aus Mikrokraftwerken in Serienfertigung
  (2019)
  DOI: 10.25593/opus4-fau-11334
  BibTeX: Download
  (anderer)
• Scholz M., Lieret M., Bigott M., Franke J.:
  Distributed Software Architecture for AGVs for Separation of Dynamic and Static Obstacles
  29th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) (Limerick, 24. Juni 2019 - 28. Juni 2019)
  In: Procedia Manufacturing 38 2019
  DOI: 10.1016/j.promfg.2020.01.047
  URL: https://www.sciencedirect.com/science/article/pii/S2351978920300482
  BibTeX: Download
• Scholz M., Zwingel M., Schuderer P., Franke J.:
  Sustainable Intralogistics due to Uniform Software and Modular Transport Entities
  26th CIRP Conference on Life Cycle Engineering (LCE) (Purdue University, West Lafayette, IN, 7. Mai 2019 - 9. Mai 2019)
  In: John W. Sutherland; Steven J. Skerlos; Fu Zhao (Hrsg.): Procedia CIRP Volume 80 2019
  DOI: 10.1016/j.procir.2019.01.033
  URL: https://www.sciencedirect.com/science/article/pii/S2212827119300356
  BibTeX: Download
• Schwarzer C., Hensel A., Roth F., Merz C., Franke J., Kaloudis M.:
  Investigation of pressureless sintered interconnections on plasma based additive copper metallization for 3-dimentional ceramic substrates in high temperature applications
  22nd European Microelectronics and Packaging Conference and Exhibition, EMPC 2019 (Pisa, 16. September 2019 - 19. September 2019)
  In: 2019 22nd European Microelectronics and Packaging Conference and Exhibition, EMPC 2019 2019
  DOI: 10.23919/EMPC44848.2019.8951873
  BibTeX: Download
• Schäfer F., Mayr A., Hess A., Zeiselmair C., Otten H., Franke J.:
  Six Sigma 4.0: Data Mining als unterstützende Technologie im Null-Fehler-Management
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 114 (2019), S. 140-144
  ISSN: 0932-0482
  DOI: 10.3139/104.112047
  URL: https://www.hanser-elibrary.com/doi/abs/10.3139/104.112047?journalCode=zwf
  BibTeX: Download
• Schäfer F., Schwulera E., Otten H., Franke J.:
  From Descriptive to Predictive Six Sigma: Machine Learning for Predictive Maintenance
  IEEE Artificial Intelligence for Industries (Laguna Hills, California, 25. September 2019 - 27. September 2019)
  DOI: 10.1109/AI4I46381.2019.00017
  URL: https://ieeexplore.ieee.org/document/9027777
  BibTeX: Download
• Schäffer E.:
  Pneumatische Sensoren
  In: Herausgegeben von Rainer Müller, Jörg Franke, Dominik Henrich, Bernd Kuhlenkötter, Annika Raatz, Alexander Verl (Hrsg.): Handbuch Mensch-Roboter-Kollaboration, München: Carl Hanser Verlag, 2019, S. 93-95
  ISBN: 978-3-446-45016-5
  BibTeX: Download
• Schäffer E., Fröhlig S., Mayr A., Franke J.:
  A method for collaborative knowledge acquisition and modeling enabling the development of a knowledge-based configurator of robot-based automation solutions
  In: Procedia CIRP 7th CIRP Global Web Conference – Towards shifted production value stream patterns through inference of data, models, and technology (2019), S. 92-97
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.01.018
  URL: https://www.researchgate.net/publication/339345450_A_method_for_collaborative_knowledge_acquisition_and_modeling_enabling_the_development_of_a_knowledge-based_configurator_of_robot-based_automation_solutions
  BibTeX: Download
• Schäffer E., Mayr A., Fuchs J., Sjarov M., Vorndran J., Franke J.:
  Microservice-based architecture for engineering tools enabling a collaborative multi-user configuration of robot-based automation solutions
  In: Procedia CIRP 7th CIRP Global Web Conference – Towards shifted production value stream patterns through inference of data, models, and technology (2019), S. 86-91
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2020.01.017
  URL: https://www.researchgate.net/publication/339348125_Microservice-based_architecture_for_engineering_tools_enabling_a_collaborative_multi-user_configuration_of_robot-based_automation_solutions
  BibTeX: Download
• Schäffer E., Mayr A., Huber T., Höflinger T., Einecke M., Franke J.:
  Gradual tool-based optimization of engineering processes aiming at a knowledge-based configuration of robot-based automation solutions
  In: Procedia CIRP 81 (2019), S. 736-741
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2019.03.186
  URL: https://www.sciencedirect.com/science/article/pii/S2212827119304913
  BibTeX: Download
• Schäffer E., Penczek L., Mayr A., Bakakeu Ngassam RJ., Franke J., Kuhlenkötter B.:
  Digitalisierung im Engineering – Ein Ansatz für ein Vorgehensmodell zur durchgehenden, arbeitsteiligen Modellierung am Beispiel von AutomationML
  In: Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse 1.2019 (2019), S. 61-66
  ISSN: 1434-1980
  DOI: 10.30844/I40M_19-1_S61-66
  URL: http://www.industrie-management.de/node/256
  BibTeX: Download
• Schäffer E., Schulz JP., Franke J.:
  Robotiklösungen im Baukastenprinzip für den Mittelstand
  (2019)
  Open Access: https://www.bigdata-insider.de/robotikloesungen-im-baukastenprinzip-fuer-den-mittelstand-a-882401/
  URL: https://www.bigdata-insider.de/robotikloesungen-im-baukastenprinzip-fuer-den-mittelstand-a-882401/
  BibTeX: Download
  (online publication)
• Seefried J., Gläßel T., Kühl A., Mayr A., Franke J.:
  Experimental Evaluation of Tool Geometries for the Ultrasonic Crimping Process for Tubular Cable Lugs
  2019 IEEE Holm Conference on Electrical Contacts (Milwaukee, WI, USA, 14. September 2019 - 18. September 2019)
  In: 2019 IEEE Holm Conference on Electrical Contacts 2019
  DOI: 10.1109/HOLM.2019.8923709
  URL: https://ieeexplore.ieee.org/document/8923709
  BibTeX: Download
• Seidel R., Mayr A., Schäfer F., Kißkalt D., Franke J.:
  Towards a Smart Electronics Production Using Machine Learning Techniques
  42nd International Spring Seminar on Electronics Technology (ISSE) (Wroclaw, Poland, 15. September 2019 - 19. Mai 2019)
  In: 2019 42nd International Spring Seminar on Electronics Technology (ISSE) 2019
  DOI: 10.1109/ISSE.2019.8810176
  URL: https://ieeexplore.ieee.org/document/8810176
  BibTeX: Download
• Selmaier A., Donhauser T., Lechler T., Zeitler JT., Franke J.:
  Simulationsgestützte Produktionsplanung flexibler Fertigungssysteme
  In: wt Werkstattstechnik - Online wt-online 2019 (2019), S. Seite 240-247
  ISSN: 1436-4980
  URL: https://www.werkstattstechnik.de/wt/currentarticle.php?data[article_id]=91523
  BibTeX: Download
• Selmaier A., Robitzch P., Mayr A., Fürst J., Franke J.:
  Cross-Process Quality Analysis of X-ray Tubes for Medical Applications Using Machine Learning Techniques
  In: Wulfsberg J., Hintze W., Behrens BA. (Hrsg.): Production at the leading edge of technology, Berlin, Heidelberg: Springer Vieweg, 2019, S. 513-522
  ISBN: 978-3-662-60417-5
  DOI: 10.1007/978-3-662-60417-5_51
  URL: https://link.springer.com/chapter/10.1007/978-3-662-60417-5_51
  BibTeX: Download
• Seßner J.:
  Sensortechnik (Optische Sensoren, Radarsensoren, Beschleunigungs- und Drehratenmessung)
  In: Rainer Müller, Jörg Franke, Dominik Henrich, Bernd Kuhlenkötter, Annika Raatz, Alexander Verl (Hrsg.): Handbuch Mensch-Roboter-Kollaboration, München: Carl Hanser Verlag, 2019
  ISBN: 978-3-446-45016-5
  BibTeX: Download
• Seßner J., Ramer C., Manert M., Reitelshöfer S., Franke J.:
  Robust Obstacle Mapping for Visually Impaired Jogger on Less Structured Paths
  DOI: 10.1109/SII.2019.8700339
  BibTeX: Download
• Shahsevani R., Reitelshofer S., Bodaghi MA., Franke J.:
  Development of new extensible components for enabling a more flexible usage of jamming-gripper
  2019 IEEE International Conference on Robotics and Biomimetics, ROBIO 2019 (Dali, 6. Dezember 2019 - 8. Dezember 2019)
  In: IEEE International Conference on Robotics and Biomimetics, ROBIO 2019 2019
  DOI: 10.1109/ROBIO49542.2019.8961834
  BibTeX: Download
• Shahsevani R., Reitelshöfer S., Alimardani R., Franke J.:
  Soft Jamming Gripper with the External Prominence of Membrane for Human-Robot Cooperation
  7th IEEE International Conference on Control, Mechatronics and Automation(ICCMA) (Delft, 6. November 2019 - 8. November 2019)
  In: 2019 IEEE 7TH INTERNATIONAL CONFERENCE ON CONTROL, MECHATRONICS AND AUTOMATION (ICCMA 2019), NEW YORK: 2019
  BibTeX: Download
• Sippel M., Lomakin K., Ankenbrand M., Petersen M., Franke J., Helmreich K., Vossiek M., Gold G.:
  3D-Printed Bowtie Filter Created by High Precision NanoJet System Combined with Novel Printing Strategy
  28th Conference on Electrical Performance of Electronic Packages and Systems (EPEPS 2019) (Montreal, Kanada)
  BibTeX: Download
• Skalon M., Görtler M., Meier B., Arneitz S., Urban N., Mitsche S., Huber C., Franke J., Sommitsch C.:
  Influence of Melt-Pool Stability in 3D Printing of NdFeB Magnets on Density and Magnetic Properties
  In: Materials 13 (2019), S. 139
  ISSN: 1996-1944
  DOI: 10.3390/ma13010139
  BibTeX: Download
• Steglich M., Löwe C., Bauernschmitt B., Rehtanz C., Böhm R., Franke J.:
  A novel method to reduce the harmonic currents in the residual earth fault current during a single phase to ground fault in compensated grids
  2019 IEEE PES Innovative Smart Grid Technologies Europe, ISGT-Europe 2019 (Bucharest, 29. September 2019 - 2. Oktober 2019)
  In: Proceedings of 2019 IEEE PES Innovative Smart Grid Technologies Europe, ISGT-Europe 2019 2019
  DOI: 10.1109/ISGTEurope.2019.8905599
  BibTeX: Download
• Stenzel D., Schwarzer C., Schnepf M., Chew LM., Blank T., Franke J., Kaloudis M.:
  Characterization of alternative sinter materials for power electronics
  22nd European Microelectronics and Packaging Conference and Exhibition, EMPC 2019 (Pisa, 16. September 2019 - 19. September 2019)
  In: 2019 22nd European Microelectronics and Packaging Conference and Exhibition, EMPC 2019 2019
  DOI: 10.23919/EMPC44848.2019.8951880
  BibTeX: Download
• Stoll T., Kirstein M., Franke J.:
  A novel approach of copper-ceramic-joints manufactured by selective laser melting
  In: Proceedings of SPIE Proceedings Volume 11101, Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems IV; 1110109 (2019) (2019)
  ISSN: 0277-786X
  DOI: 10.1117/12.2529422
  BibTeX: Download
• Syed Khaja AH., Franke J.:
  Process optimization in transient liquid phase soldering (TLPS) for an efficient and economical production of high temperature power electronics
  9th International Conference on Integrated Power Electronics Systems, CIPS 2016 (Nuremberg, 8. März 2016 - 10. März 2016)
  In: CIPS 2016 - 9th International Conference on Integrated Power Electronics Systems 2019
  BibTeX: Download
• Tur B., Fischer E., Franke J., Bergs C., Schulze C.:
  Modelling of Energy Storage Devices and Converters for Energy Flow Simulation in Plant Simulation
  In: Putz M, Schlegel A (Hrsg.): ASIM 2019, Auerbach /Vogtl.: Wissenschaftliche Scripten, 2019, S. 97 - 110
  ISBN: 978-3-95735-113-5
  BibTeX: Download
• Urban N., Bauch L., Armbruster R., Franke J.:
  Evaluation of soft magnetic ferrosilicon FeSi6.5 for laser beam melting
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, 3. Dezember 2019 - 4. Dezember 2019)
  BibTeX: Download
• Wang L., Fu Z., Süß-Wolf R., Travitzky N., Greil P., Franke J.:
  Laser-Associated Selective Metallization of Ceramic Surface With Infrared Nanosecond Laser Technology
  In: Advanced Engineering Materials 10 (2019), S. 1900096
  ISSN: 1438-1656
  DOI: 10.1002/adem.201900096
  BibTeX: Download
• Weigelt M., Kink J., Mayr A., von Lindenfels J., Kühl A., Franke J.:
  Digital Twin of the Linear Winding Process Based on Explicit Finite Element Method
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011857
  URL: https://ieeexplore.ieee.org/document/9011857
  BibTeX: Download
• Weigelt M., Mayr A., Kühl A., Franke J.:
  Methodical Comparison of Alternative Powertrain Technologies for Long-Distance Mobility Using Germany as an Example
  In: WEVJ (World Electric Vehicle Journal), 2019, S. 1-20
  DOI: 10.3390/wevj10040077
  URL: https://www.mdpi.com/2032-6653/10/4/77
  BibTeX: Download
• Wiesenmayer S., Han D., Müller M., Hoerhold R., Meschut G., Merklein M.:
  Fundamental mechanisms and their interactions in shear‐clinching technology and investigation of the process robustness
  In: Materialwissenschaft und Werkstofftechnik (2019)
  ISSN: 0933-5137
  DOI: 10.1002/mawe.201900030
  BibTeX: Download
• Yu Z., Wang S., Letz S., Bayer CF., Häußler F., Schletz A., Suganuma K.:
  Optimization of Ag-Ag Direct Bonding for Wafer-Level Power Electronics Packaging via Design of Experiments
  2019 International Conference on Electronics Packaging (ICEP) (Niigata, Japan, 17. April 2019 - 20. April 2019)
  In: 2019 International Conference on Electronics Packaging (ICEP) 2019
  DOI: 10.23919/ICEP.2019.8733496
  URL: https://ieeexplore.ieee.org/document/8733496
  BibTeX: Download
• Zeitler JT., Reitberger T., Reichle A., Backhaus C., Lindlein N., Franke J.:
  Technical Modelling Approach for Spatial Integrated Optomechatronic Products
  29th CIRP Design Conference 2019 (Póvoa de Varzim, 8. Mai 2019 - 10. September 2019)
  In: Goran D. Putnik (Hrsg.): Procedia CIRP, Volume 84 2019
  DOI: 10.1016/j.procir.2019.03.266
  BibTeX: Download
• Ziegler M., Biburger M., Kühl A., Franke J.:
  Influences of joining process parameters on stator and rotor cores for electric drives
  16th International Conference on Electrical Machines, Drives and Power Systems, ELMA 2019 (Varna, 6. Juni 2019 - 8. Juni 2019)
  In: 2019 16th Conference on Electrical Machines, Drives and Power Systems, ELMA 2019 - Proceedings 2019
  DOI: 10.1109/ELMA.2019.8771687
  BibTeX: Download
• Ziegler M., Mayr A., Seefried J., Kühl A., Franke J.:
  Potentials of Process Monitoring During Laser Welding of Electrical Steel Laminations
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011918
  URL: https://ieeexplore.ieee.org/document/9011918
  BibTeX: Download
• von Lindenfels J., Urban N., Mayr A., Meyer AW., Franke J.:
  Advances in Quality Monitoring of Stray Fields on Rotors of Permanent Magnet Synchronous Motors
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9012022
  URL: https://ieeexplore.ieee.org/document/9012022
  BibTeX: Download
• von Lindenfels J., Ziegler M., Kneidl M., Kühl A., Franke J.:
  Challenges in bonding processes in the production of electric motors
  9th Congress of the German Academic Association for Production Technology (WGP) (Hamburg, 30. September 2019 - 2. Oktober 2019)
  In: Wulfsberg, Jens P., Hintze, Wolfgang, Behrens, Bernd-Arno (Hrsg.): Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Berlin: 2019
  DOI: 10.1007/978-3-662-60417-5
  URL: https://www.springer.com/gp/book/9783662604168#aboutBook
  BibTeX: Download

2018

• Ankenbrand M., Franke J., Lomakin K., Pavlenko T., Sippel M., Gold G., Weidner T., Weiß D., Helmreich K.:
  Erzeugung von 3D-Funktionsstrukturen fuer Hochfrequenzanwendungen durch Druckverfahren
  In: PLUS - Produktion von Leiterplatten und Systemen (2018)
  BibTeX: Download
• Ankenbrand M., Scheetz M., Franke J., Lomakin K., Sippel M., Gold G., Helmreich K.:
  Generation of 3D Functional Structures for High- Frequency Applications by Printing Technologies
  2018 13th International Congress Molded Interconnect Devices (MID)
  DOI: 10.1109/ICMID.2018.8527052
  BibTeX: Download
• Baier L., Spindler S., Wacker M., Franke J., Schuderer P.:
  Defining Batches under Consideration of Quality-Related Factors for Improved Failure and Scrap Analysis
  In: Applied Mechanics and Materials 882 (2018), S. 17--23
  ISSN: 1660-9336
  DOI: 10.4028/www.scientific.net/AMM.882.17
  BibTeX: Download
• Bakakeu J., Fuchs J., Javied T., Brossog M., Franke J., Klos H., Eberlein W., Tolksdorf S., Peschke J., Jahn L.:
  Multi-Objective Design Space Exploration for the Integration of Advanced Analytics in Cyber-Physical Production Systems
  IEEE International Conference on Industrial Engineering and Engineering Management (IEEE IEEM) (Bangkok, THAILAND, 16. Dezember 2018 - 19. Dezember 2018)
  In: 2018 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT (IEEE IEEM), NEW YORK: 2018
  BibTeX: Download
• Bakakeu Ngassam RJ., Bauer J., Tolksdorf S., Klos HH., Peschke J., Fehrle A., Eberlein W., Bürner J., Brossog M., Jahn L., Franke J.:
  An Artificial Intelligence Approach for Online Energy Optimization of Flexible Manufacturing Systems
  iSEnEC: Integration of Sustainable Energy Conference (Nürnberg, 17. Juli 2018 - 18. Juli 2018)
  In: Trans Tech Publications Ltd (Hrsg.): Energy Efficiency in Strategy of Sustainable Production IV 2018
  DOI: 10.4028/www.scientific.net/AMM.882.96
  URL: https://www.scientific.net/AMM.882.96
  BibTeX: Download
• Bauer J., Bakakeu Ngassam RJ., Hopfengärtner M., Bürner J., Braun T., Schäfer F., Wittmann M., Fehrle A., Maußner B., Lechler T., Meiners M., Konrad C., Franke J.:
  SMARTLOCATE – INDOOR LOCALIZATION WITH BLUETOOTH BEACONS AND SMARTPHONE SENSORS
  Smart Public Building 2018 (Stuttgart, 19. Oktober 2018 - 20. Oktober 2018)
  In: Dieter Uckelmann (Hrsg.): Smart Public Building 2018 Proceedings 2018
  Open Access: http://www.hft-stuttgart.de/Forschung/i_city/Handlungsfelder/Explorative-Projekte-i-city/Dokumente/pdfgesamt/de/
  URL: http://www.hft-stuttgart.de/Forschung/i_city/Handlungsfelder/Explorative-Projekte-i-city/Dokumente/pdfgesamt/de/
  BibTeX: Download
• Bauer J., Gründel L., Seßner J., Meiners M., Lieret M., Lechler T., Konrad C., Franke J.:
  CAMERA-BASED FALL DETECTION SYSTEM WITH THE SERVICE ROBOT SANBOT ELF
  Smart Public Building (Stuttgart, 19. Oktober 2018 - 20. Juni 2019)
  In: Dieter Uckelmann (Hrsg.): Smart Public Building 2018Conference Proceedings 2018
  Open Access: http://www.hft-stuttgart.de/Forschung/i_city/Handlungsfelder/Explorative-Projekte-i-city/Dokumente/pdfgesamt/de/
  BibTeX: Download
• Blank A., Seßner J., Yoo IS., Metzner M., Deichsel F., Diercks T., Eberlein D., Felden D., Leser A., Franke J.:
  Bag Bin-Picking Based on an Adjustable, Sensor-Integrated Suction Gripper
  In: Dr.-Ing. Thorsten Schüppstuhl, Prof. Dr.-Ing. Kirsten Tracht, Prof. Dr.-Ing. Jörg Franke (Hrsg.): Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter, Wiesbaden: Springer Vieweg, 2018
  ISBN: 978-3-662-56713-5
  DOI: 10.1007/978-3-662-56714-2
  BibTeX: Download
• Bogner E., Löwen U., Franke J.:
  Bedeutung der zukünftigen Produktion kundenindividueller Produkte in Losgröße 1
  In: Redlich, Tobias; Moritz, Manuel; Wulfsberg, Jens P. (Hrsg.): Vernetzt – Dezentral – Kollaborativ. Interdisziplinäre Perspektiven zur Zukunft der Wertschöpfung, Berlin: Springer Verlag, 2018, S. 63-75
  BibTeX: Download
• Braun T., Böhm R., Praß J., Baierl U., Hahn D., Franke J.:
  Investigation of Alternative Applications of Electrically Functionalized Surfaces Using the Plasma-Coating-Technology
  In: Robert Schmitt, Günther Schuh (Hrsg.): Advances in Production Research - Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19–20, 2018, Switzerland: Springer Nature, 2018, S. 594 - 602
  ISBN: 978-3-030-03450-4
  DOI: 10.1007/978-3-030-03451-1
  BibTeX: Download
• Böhm R., Praß J., Bürner J., Franke J.:
  Neue Ansätze für Energiemanagement und Energieeffizienz in der Produktion
  In: Umwelt-Technologie und Energie in Bayern (2018), S. 40 - 41
  BibTeX: Download
• Böhm R., Weindl C., Franke J.:
  Control of a hybrid storage system (HSS) comprising a RedOx-Flow Battery and a High Speed Flywheel for a hybrid compensation system
  IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe) (Sarajevo, 21. Oktober 2018 - 25. Oktober 2018)
  In: 2018 IEEE PES INNOVATIVE SMART GRID TECHNOLOGIES CONFERENCE EUROPE (ISGT-EUROPE), NEW YORK: 2018
  BibTeX: Download
• Böhner J., Scholz M., Franke J., Sauer A.:
  Integrating digitization technologies into resource efficiency driven industrial learning environments
  8th CIRP Conference on Learning Factories - Advanced Engineering Education & Training for Manufacturing Innovation
  In: Procedia Manufacturing - Volume 23 2018
  DOI: 10.1016/j.promfg.2018.03.158
  BibTeX: Download
• Bürner J., Praß J., Franke J.:
  Identification of demand side management potentials within the sector of domestic living
  In: Environment and Energy in Bavaria (2018)
  BibTeX: Download
• Bürner J., Praß J., Franke J.:
  Identifikation von Lastmanagementpotenzialen im Umfeld des privaten Wohnens
  In: Umwelt-Technologie und Energie in Bayern (2018), S. 42 - 43
  BibTeX: Download
• Donhauser T., Baier L., Ebersbach T., Franke J., Schuderer P.:
  Simulationbasierte Optimierung von Fabrikabläufen: Implementierung und Test eines Algorithmus zur ereignisbasierten Regelung der Materialflüsse
  In: wt Werkstattstechnik - Online 108 (2018), S. 221--227
  ISSN: 1436-4980
  Open Access: https://www.werkstattstechnik.de/wt/article.php?data[article_id]=89357
  URL: https://www.werkstattstechnik.de/wt/article.php?data[article_id]=89357
  BibTeX: Download
• Donhauser T., Ebersbach T., Franke J., Schuderer P.:
  Rolling-reactive Optimization of Production Processes in a Calcium Silicate Masonry Unit Plant Using Online Simulation
  In: Procedia CIRP 72 (2018), S. 249-254
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2018.03.266
  BibTeX: Download
• Faltus F., Fischer E., Franke J.:
  Annäherung an den Digitalen Wandel
  In: Handling 46 (2018), S. 6-7
  ISSN: 0936-7365
  BibTeX: Download
• Fischer A., Kuhn T., Drummer D., Franke J.:
  Effect of talc on the metal adhesion of laser-structured polymer parts
  13th International Congress Molded Interconnect Devices (Würzburg, 26. September 2018 - 26. September 2018)
  BibTeX: Download
• Freiherr von Lindenfels J., Heyder A., Funk S., Pigler S., Franke J.:
  Contribution to the Reduction of Annealing Processes in the Manufacturing of Valve Solenoids by Using Inline Measuring Technology in the Caulking Process
  Integration of Sustainable Energy Expo & Conference (iSEnEC) (NürnbergConvention Center West, 17. Juli 2018 - 18. Juli 2018)
  In: Jörg Franke, Michael Scholz and Annika Höft (Hrsg.): Energy Efficiency in Strategy of Sustainable Production IV, Zürich, Schweiz: 2018
  BibTeX: Download
• Friedlein M., Gräf D., Jaumann A., Raiser F., Franke J.:
  Occurrence and Influence of Fretting Corrosion on Receptacle Contact Resistance
  2018 IEEE Holm Conference on Electrical Contacts (Albuquerque, 14. Oktober 2018 - 18. Oktober 2018)
  In: 2018 IEEE Holm Conference on Electrical Contacts 2018
  DOI: 10.1109/HOLM.2018.8611669
  BibTeX: Download
• Gläßel T., Baat F., Schwinghammer D., Seefried J., Kühl A., Franke J.:
  Infrared laser based contacting of bar-wound windings in the field of electric drives production
  10th CIRP Conference on Photonic Technologies [LANE 2018] (Fuerth, 3. September 2018 - 6. September 2018)
  In: M. Schmidt, F. Vollertsen, G. Dearden (Hrsg.): Procedia CIRP, Volume 74 2018
  DOI: 10.1016/j.procir.2018.08.005
  BibTeX: Download
• Gläßel T., Spreng S., Franke J.:
  Kontaktierverfahren für lackisolierte Leiter
  Veröffentlichungsnummer WO2018/219802A1 (2018)
  BibTeX: Download
  (anderer)
• Gräf D., Neermann S., Stuber L., Scheetz M., Franke J.:
  Pushing the Boundaries of 3D-MID: Pulse-Width Modulated Light Technology for Enhancing Surface Properties and Enabling Printed Electronics on FFF-Printed Structures
  In: 2018 13th International Congress Molded Interconnect Devices (MID) 2018
  DOI: 10.1109/ICMID.2018.8526995
  BibTeX: Download
• Hahn D., Braun T., Franke J.:
  Entwicklung und Evaluierung eines Systems zur automatisierten Prüfung von im Plasmabeschichtungsprozess additiv gefertigten Leiterbahnstrukturen für elektronische Baugruppen
  Gemeinschaftsveranstaltung von DVS – Deutscher Verband für Schweißen und verwandte Verfahren e. V. und GMM – VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (Hg.) 2018 – Elektronische Baugruppen und Leiterplatten (Fellbach, 20. Februar 2018 - 21. Februar 2018)
  In: Elektronische Baugruppen und Leiterplatten EBL 2018, Multifunktionale Aufbau- und Verbindungstechnik – Beherrschung der Vielfalt, Düsseldorf: 2018
  BibTeX: Download
• Heisler P., Gick S., Franke J.:
  Innovative, release agent-reduced manufacturing concepts for the manual series production of complex foam parts
  4th International Conference on Control, Automation and Robotics (ICCAR) (Auckland, 20. April 2018 - 23. April 2018)
  DOI: 10.1109/ICCAR.2018.8384654
  BibTeX: Download
• Heisler P., Gick S., Franke J.:
  The way to a simple and environment-friendly production design of complex foam parts – innovative solutions for the polyurethane manufacturing industry
  International Conference in Flexible Automation and Intelligent Manufacturing (FAIM) (Columbus, Ohio, 10. Juni 2018 - 14. Juni 2018)
  In: Elsevier (Hrsg.): Procedia Manufacturing Volume 17 2018
  DOI: 10.1016/j.promfg.2018.10.099
  BibTeX: Download
• Hensel A., Lê TA., Sauermann A., Franke J.:
  Investigations on Measuring the Thermal Conductivity of Alumina Substrates with Laser Flash Analysis
  International Spring Seminar on Electronics Technology, Institute of Electrical and Electronics Engineers et al. 2018 – 2018 41st International Spring Seminar (Zlatibor, Serbia)
  In: IEEE (Hrsg.): 2018 41st International Spring Seminar on Electronics Technology (ISSE) 2018
  DOI: 10.1109/ISSE.2018.8443661
  BibTeX: Download
• Hensel A., Müller M., Franke J.:
  Einfluss der Beschichtungssequenz auf die Bauteiltemperatur während eines plasmabasierten Kupferbeschichtungsprozesses auf unterschiedlichen Substratmaterialien
  Elektronische Baugruppen und Leiterplatten EBL 2018 (Fellbach, Deutschland)
  In: EBL 2018 : multifunktionale Aufbau- und Verbindungstechnik - Beherrschung der Vielfalt : Vorträge der 9. DVS/GMM-Tagung in Fellbach am 20. und 21. Februar 2018 2018
  BibTeX: Download
• Hensel A., Schwarzer C., Scheetz M., Kaloudis M., Franke J.:
  Investigations of Silver Sintered Interconnections 3-Dimensional Ceramics with Plasma Based Additive Copper Metallizations
  20th IEEE Electronics Packaging Technology Conference (EPTC) (Singapore, 4. Dezember 2018 - 7. Dezember 2018)
  In: 2018 IEEE 20TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), NEW YORK: 2018
  BibTeX: Download
• Ischdonat N., Dreyer C., Gräf D., Franke J., Horber J., Hedges M.:
  Influences of Manufacturing Sequences for the Application of Printed Electronics on Aircraft Interior Components
  In: 2018 13th International Congress Molded Interconnect Devices (MID) 2018
  DOI: 10.1109/ICMID.2018.8526932
  BibTeX: Download
• Kißkalt D., Fleischmann H., Kreitlein S., Knott M., Franke J.:
  A novel approach for data‑driven process and condition monitoring systems on the example of mill‑turn centers
  In: Production Engineering (2018)
  ISSN: 0944-6524
  DOI: 10.1007/s11740-018-0797-0
  URL: https://link.springer.com/article/10.1007/s11740-018-0797-0
  BibTeX: Download
• Kißkalt D., Mayr A., von Lindenfels J., Franke J.:
  Towards a Data-Driven Process Monitoring for Machining Operations Using the Example of Electric Drive Production
  8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 4. Dezember 2018 - 5. Dezember 2018)
  DOI: 10.1109/EDPC.2018.8658293
  URL: https://ieeexplore.ieee.org/document/8658293
  BibTeX: Download
• Kohn S., Blank A., Puljiz D., Zenkel L., Bieber O., Hein B., Franke J.:
  Towards a Real-Time Environment Reconstruction for VR-Based Teleoperation Through Model Segmentation
  2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Madrid, 1. Oktober 2018 - 5. Oktober 2018)
  In: IEEE (Hrsg.): Proceedings of 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2018
  DOI: 10.1109/IROS.2018.8594053
  BibTeX: Download
• Kolb T., Mahr A., Huber F., Tremel J., Schmidt M.:
  Qualification of channels produced by laser powder bed fusion: Analysis of cleaning methods, flow rate and melt pool monitoring data
  In: Additive Manufacturing (2018)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2018.11.026
  BibTeX: Download
• Kühl A., Kreitlein S., Höft A., Franke J.:
  Energy efficient processes of electric motor manufacturing
  Texas Power and Energy Conference (TPEC) (Texas A&M, College Station, TX, USA, 8. Februar 2018 - 9. Juni 2018)
  In: 2018 IEEE Texas Power and Energy Conference (TPEC) 2018
  DOI: 10.1109/TPEC.2018.8312076
  BibTeX: Download
• Kühl A., Mayr A., Masuch M.:
  Produktionstechnologien für die Antriebe der Zukunft: Anwendungsorientierte Forschung am E|Drive-Center des Lehrstuhls FAPS in Nürnberg
  In: Automobiltechnologie in Bayern + e-Car 2018 (2018), S. 42–45
  URL: https://media-mind.info/pdf/2018/auto_deutsch_2018-19.pdf
  BibTeX: Download
  (anderer)
• Landgraf M., Ollech J., Klemm T., Schaude J., Reitelshöfer S., Franke J.:
  Lightweight Control Method for Dielectric Elastomer Actuators as Self-Sensing Artificial Muscles
  2nd IEEE International Conference on Cyborg and Bionic Systems (CBS) (Shenzhen, 25. Oktober 2018 - 27. Oktober 2018)
  In: 2nd IEEE International Conference on Cyborg and Bionic Systems (CBS) 2018
  BibTeX: Download
• Landgraf M., Yoo IS., Seßner J., Mooser M., Kaufmann D., Mattejat D., Reitelshöfer S., Franke J.:
  Gesture Recognition with Sensor Data Fusion of Two Complementary Sensing Methods
  7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob) (Enschede, 26. August 2018 - 29. August 2018)
  In: 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob) 2018
  BibTeX: Download
• Lomakin K., Pavlenko T., Ankenbrand M., Sippel M., Ringel J., Scheetz M., Klemm T., Gräf D., Helmreich K., Franke J., Gold G.:
  Evaluation and Characterization of 3D Printed Pyramid Horn Antennas utilizing different Deposition Techniques for Conductive Material
  In: IEEE Transactions on Components, Packaging and Manufacturing Technology (2018), S. 1-1
  ISSN: 2156-3950
  DOI: 10.1109/tcpmt.2018.2871931
  BibTeX: Download
• Lomakin K., Pavlenko T., Sippel M., Gold G., Helmreich K., Ankenbrand M., Urban N., Franke A.:
  Impact of Surface Roughness on 3D printed SLS Horn Antennas
  In: European Conference on Antennas and Propagation (EUCAP) 2018
  DOI: 10.1049/cp.2018.1235
  BibTeX: Download
• Lomakin K., Pavlenko T., Sippel M., Gold G., Weidner T., Helmreich K., Ankenbrand M., Franke J.:
  3D Printed Helix Antenna
  In: European Conference on Antennas and Propagation (EUCAP) 2018
  DOI: 10.1049/cp.2018.1034
  BibTeX: Download
• Lomakin K., Sippel M., Gold G., Fröhlich J., Helmreich K., Ankenbrand M., Franke J.:
  Low reflective aerosol Jet printed broadband matched load up to 67 GHz
  In: German Microwave Conference 2018
  DOI: 10.23919/gemic.2018.8335109
  BibTeX: Download
• Lomakin K., Sippel M., Gold G., Ringel J., Weiß D., Helmreich K., Ankenbrand M., Franke J.:
  Substituting bond wires by additively manufactured interconnections
  In: German Microwave Conference 2018
  DOI: 10.23919/gemic.2018.8335106
  BibTeX: Download
• Lorenz L., Nieweglowski K., Wolter KJ., Bock K., Hoffmann GA., Overmeyer L., Reitberger T., Franke J.:
  Additive waveguide manufacturing for optical bus couplers by aerosol jet printing using conditioned flexible substrates
  21st European Microelectronics and Packaging Conference and Exhibition, EMPC 2017 (Warschau, 10. September 2017 - 13. September 2017)
  DOI: 10.23919/EMPC.2017.8346857
  BibTeX: Download
• Mayr A., Lutz B., Weigelt M., Gläßel T., Kißkalt D., Masuch M., Riedel A., Franke J.:
  Evaluation of Machine Learning for Quality Monitoring of Laser Welding Using the Example of the Contacting of Hairpin Windings
  8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 4. Dezember 2018 - 5. Dezember 2018)
  DOI: 10.1109/EDPC.2018.8658346
  URL: https://ieeexplore.ieee.org/document/8658346
  BibTeX: Download
• Mayr A., Meyer AW., Masuch M., Braun A., Franke J.:
  Towards a Software System Providing Knowledge about Energy and Resource Efficiency Potentials within the Product and Process Development of Electric Drives
  Integration of Sustainable Energy Conference (iSEneC) (Nuremberg, 17. Juli 2018 - 18. Juli 2018)
  In: Applied Mechanics and Materials, Vol. 882 2018
  DOI: 10.4028/www.scientific.net/AMM.882.53
  URL: https://www.scientific.net/AMM.882.53
  BibTeX: Download
• Mayr A., Meyer AW., Schäffer E., Masuch M., von Lindenfels J., Mössinger G., Franke J.:
  Towards a Knowledge-Based Design Methodology for Managing the Complexity in the Integrated Product and Process Development of Electric Motors
  In: Schmitt, Robert; Schuh, Günther (Hrsg.): Advances in Production Research, Cham: Springer International Publishing, 2018, S. 112–125
  DOI: 10.1007/978-3-030-03451-1_12
  URL: https://link.springer.com/chapter/10.1007/978-3-030-03451-1_12
  BibTeX: Download
• Mayr A., Weigelt M., Kühl A., Grimm S., Erll A., Potzel M., Franke J.:
  Lean 4.0 - A conceptual conjunction of lean management and Industry 4.0
  51st CIRP Conference on Manufacturing Systems (Stockholm, Sweden, 16. Mai 2018 - 18. Mai 2018)
  In: Procedia CIRP, Volume 72 2018
  DOI: 10.1016/j.procir.2018.03.292
  URL: https://www.sciencedirect.com/science/article/pii/S2212827118304736
  BibTeX: Download
• Mayr A., Weigelt M., Masuch M., Adrion M., Bauer A., Wirsinger K., Franke J.:
  Sustainability Aspects of Current Market Developments, Different Product Types and Innovative Manufacturing Processes of Electric Motors
  Integration of Sustainable Energy Conference (iSEneC) (Nuremberg, 17. Juli 2018 - 18. Juli 2018)
  In: Applied Mechanics and Materials, Vol. 882 2018
  DOI: 10.4028/www.scientific.net/AMM.882.64
  URL: https://www.scientific.net/AMM.882.64
  BibTeX: Download
• Mayr A., Weigelt M., Masuch M., Meiners M., Hüttel F., Franke J.:
  Application Scenarios of Artificial Intelligence in Electric Drives Production
  4th International Conference on System-Integrated Intelligence: Intelligent, Flexible and Connected Systems in Products and Production (Hannover, 19. Juni 2018 - 20. Juli 2018)
  In: Procedia Manufacturing, Volume 24 2018
  DOI: 10.1016/j.promfg.2018.06.006
  URL: http://www.sciencedirect.com/science/article/pii/S2351978918305237
  BibTeX: Download
• Mayr A., Weigelt M., von Lindenfels J., Seefried J., Ziegler M., Mahr A., Urban N., Kühl A., Hüttel F., Franke J.:
  Electric Motor Production 4.0 – Application Potentials of Industry 4.0 Technologies in the Manufacturing of Electric Motors
  8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 4. Dezember 2018 - 5. Dezember 2018)
  DOI: 10.1109/EDPC.2018.8658294
  URL: https://ieeexplore.ieee.org/document/8658294
  BibTeX: Download
• Metzner M., Bickel B., Mayr A., Franke J.:
  Simulation-Assisted Method for Evaluating Innovative Production Technologies for Electric Traction Motors
  8th International Electric Drives Production Conference (EDPC) (Schweinfurt, Germany, 4. Dezember 2018 - 5. Dezember 2018)
  In: IEEE (Hrsg.): 2018 8th International Electric Drives Production Conference (EDPC) 2018
  DOI: 10.1109/EDPC.2018.8658353
  URL: https://ieeexplore.ieee.org/document/8658353
  BibTeX: Download
• Metzner M., Bönig J., Blank A., Schäffer E., Franke J.:
  “Human-In-The-Loop”- Virtual Commissioning of Human-Robot Collaboration Systems
  In: Dr.-Ing. Thorsten Schüppstuhl, Prof. Dr.-Ing. Kirsten Tracht, Prof. Dr.-Ing. Jörg Franke (Hrsg.): Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter, Springer Vieweg, 2018
  ISBN: 978-3-662-56713-5
  DOI: 10.1007/978-3-662-56714-2
  URL: http://www.springer.com/us/book/9783662567135
  BibTeX: Download
• Meyer AW., von Lindenfels J., Mayr A., Franke J.:
  Manufacturing Imperfections in Electric Motor Production with Focus on Halbach Array Permanent Magnet Rotor Assembly
  8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 4. Dezember 2018 - 5. Dezember 2018)
  DOI: 10.1109/EDPC.2018.8658282
  URL: https://ieeexplore.ieee.org/document/8658282
  BibTeX: Download
• Müller M., Franke J.:
  Innovative Approach of efficient High Humidity and High Temperature Reverse Bias Testing as significant Qualification Method for Power Electronic Modules
  20th IEEE Electronics Packaging Technology Conference (EPTC) (Singapore, 4. Dezember 2018 - 7. Dezember 2018)
  In: 2018 IEEE 20TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), NEW YORK: 2018
  BibTeX: Download
• Neermann S., Scheetz M., Franke J., Roudenko J., Schirmer J., Reichenberger M.:
  Substrate pretreatments: an investigation of the effects on aerosol jet printed structures
  WGP-Jahreskongress
  DOI: 10.1007/978-3-030-03451-1_35
  BibTeX: Download
• Nguyen HG., Schäfer F., Otten H.:
  Service quality for retail banks in the digital age
  3rd International Conference on Quality Engineering and Management (Universitat Internacional de Catalunya (UIC) Barcelona, 11. Juli 2018 - 13. Juli 2018)
  In: International Conference on Quality Engineering and Management (Hrsg.): Proceedings book of the 3rd International Conference on Quality Engineering and Management, 2018 2018
  Open Access: http://icqem.dps.uminho.pt/icqem18_proceedingsbook.pdf
  BibTeX: Download
• Praß J., Bürner J., Franke J.:
  Energy-efficient room ventilation with heat recovery using a novel concept
  In: Environment and Energy in Bavaria (2018), S. 29-30
  BibTeX: Download
• Praß J., Bürner J., Franke J.:
  Energieeffiziente Raumbelüftung mit Wärmerückgewinnung unter Verwendung eines neuartigen Wirkprinzips
  In: Umwelt-Technologie und Energie in Bayern (2018), S. 46-47
  BibTeX: Download
• Praß J., Wannemacher H., Franke J., Becker S.:
  Investigation of the influence of dimples on the resistance of overflowed plates
  Conference on Modelling Fluid Flow (CMFF’18) (Budapest, 4. September 2018 - 7. September 2018)
  In: Conference on Modelling Fluid Flow (CMFF’18) - The 17th International Conference on Fluid Flow Technologies 2018
  BibTeX: Download
• Reitberger T., Stoll T., Hoffmann GA., Lorenz L., Neermann S., Overmeyer L., Bock K., Wolter KJ., Franke J.:
  The future of short-range high-speed data transmission: printed polymer optical waveguides (POW) innovation, fabrication, and challenges
  In: Proceedings of SPIE Proc. SPIE 10751, Optics and Photonics for Information Processing XII (2018), Art.Nr.: 1075109
  ISSN: 0277-786X
  DOI: 10.1117/12.2318752
  BibTeX: Download
• Renz A., Praß J., Riedel J., Nadler O., Becker S.:
  Numerical and Experimental Investigation of the Velocity Field in Friction Ventilators
  International Conference on Fan Noise, Aerodynamics, Applications and Systems (Darmstadt, 18. April 2018 - 20. April 2018)
  BibTeX: Download
• Riedel A., Masuch M., Weigelt M., Gläßel T., Kühl A., Reinstein S., Franke J.:
  Challenges of the Hairpin Technology for Production Techniques
  2018 21st International Conference on Electrical Machines and Systems (ICEMS) (Jeju, 7. Oktober 2018 - 10. Oktober 2018)
  DOI: 10.23919/ICEMS.2018.8549105
  URL: https://ieeexplore.ieee.org/document/8549105
  BibTeX: Download
• Riedle H., Molz P., Franke J.:
  Determination of the Mechanical Properties of Cardiac Tissue for 3D Printed Surgical Models
  IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES) (Kuching, MALAYSIA, 3. Dezember 2018 - 6. Dezember 2018)
  In: 2018 IEEE-EMBS CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES (IECBES), NEW YORK: 2018
  DOI: 10.1109/IECBES.2018.8626728
  BibTeX: Download
• Riedle H., Mukai B., Molz P., Franke J.:
  Determination of the Mechanical Properties of Aortic Tissue for 3D Printed Surgical Models
  2018 11th Biomedical Engineering International Conference (BMEiCON) (Chiang Mai, 21. November 2018 - 24. November 2018)
  In: BMEiCON - 2018, [Piscataway, New Jersey]: 2018
  DOI: 10.1109/BMEiCON.2018.8609983
  BibTeX: Download
• Riedle H., Seitz V., Schraudolf L., Franke J.:
  Generation of 3D Silicone Models of Anatomic Soft Tissue Structures - A Comparison of Direct 3D Printing and Molding Techniques
  IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES) (Kuching, MALAYSIA, 3. Dezember 2018 - 6. Dezember 2018)
  In: 2018 IEEE-EMBS CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES (IECBES), NEW YORK: 2018
  DOI: 10.1109/IECBES.2018.8626687
  BibTeX: Download
• Roudenko J., Schirmer J., Reichenberger M., Neermann S., Franke J.:
  Influence of convection sintering parameters on electrical conductivity and adhesion of inkjet-printed silver nanoparticle inks on flexible substrates
  13th International Congress Molded Interconnect Devices (MID)
  DOI: 10.1109/ICMID.2018.8527048
  BibTeX: Download
• Sand C., Lechler T., Schuh P., Franke J.:
  Potentials for Error Detection and Process Visualization in Assembly Lines Using a Parallel Coordinates Plot
  In: Applied Mechanics and Materials - Energy Efficiency in Strategy of Sustainable Production IV 2018
  DOI: 10.4028/www.scientific.net/AMM.882.10
  BibTeX: Download
• Sand C., Meiners M., Eberle J., Franke J.:
  Evaluation of energy measurements for error detection in press-fitting processes
  In: Small-scale Intelligent Manufacturing Systems (SIMS), 2018 2nd International Symposium on, 2018
  BibTeX: Download
• Schirmer J., Eisen K., Reichenberger M., Roudenko J., Neermann S., Franke J.:
  Long-Term Behavior of SMT Components Mounted on Printed Polymer Thick Film Pastes
  13th International Congress Molded Interconnect Devices (MID)
  DOI: 10.1109/ICMID.2018.8526939
  BibTeX: Download
• Schirmer J., Roudenko J., Reichenberger M., Neermann S., Franke J.:
  Adhesion Measurements for Printed Electronics: A Novel Approach to Cross Cut Testing
  41st International Spring Seminar on Electronics Technology (ISSE) (Zlatibor, 16. Mai 2018 - 20. Mai 2018)
  DOI: 10.1109/ISSE.2018.8443665
  BibTeX: Download
• Schirmer J., Roudenko J., Reichenberger M., Neermann S., Franke J.:
  Print Quality Assessment by Image Processing Methods for Printed Electronics Applications
  2018 41st International Spring Seminar on Electronics Technology (ISSE) (Zlatibor, 16. Mai 2018 - 20. Mai 2018)
  DOI: 10.1109/ISSE.2018.8443617
  BibTeX: Download
• Scholz M., Donhauser T., Franke J.:
  Integration eines Multi-Agenten-Systems in eine Ereignisdiskrete Materialflusssimulation
  Tagung der ASIM/GI-Fachgruppen 2018 (Heilbronn, 8. März 2018 - 9. März 2018)
  In: Tobias Loose (Hrsg.): Tagungsband Workshop 2018 ASIM/GI-Fachgruppen, Wien: 2018
  Open Access: https://www.hs-heilbronn.de/16667696/asim18_tagungsband-pdf.pdf
  BibTeX: Download
• Scholz M., Zhang X., Franke J.:
  Implementation of an Intralogistics Routing-Service Basing on Decentralized Workspace Digitization
  5th Green Factory Bavaria Colloquium - iSEnEC 2018 (Nürnberg, 17. Juli 2018 - 18. Juli 2018)
  In: Jörg Franke, Michael Scholz, Annika Höft (Hrsg.): Energy Efficiency in Strategy of Sustainable Production IV, Schweiz: 2018
  DOI: 10.4028/www.scientific.net/AMM.882.90
  BibTeX: Download
• Scholz M., Zhang X., Kreitlein S., Franke J.:
  Decentralized Intelligence: The Key for an Energy Efficient and Sustainable Intralogistics
  15th Global Conference on Sustainable Manufacturing
  DOI: 10.1016/j.promfg.2018.02.171
  BibTeX: Download
• Schäfer F., Zeiselmair C., Becker J., Otten H.:
  Synthesizing CRISP-DM and Quality Management: A Data Mining Approach for Production Processes
  2018 IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD) (Marrakech, 21. November 2018 - 23. November 2018)
  DOI: 10.1109/ITMC.2018.8691266
  BibTeX: Download
• Schäffer E., Bartelt M., Pownuk T., Schulz JP., Kuhlenkötter B., Franke J.:
  Configurators as the basis for the transfer of knowledge and standardized communication in the context of robotics
  In: Procedia CIRP 72 (2018), S. 310-315
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2018.03.190
  BibTeX: Download
• Schäffer E., Leibinger H., Stamm A., Brossog M., Franke J.:
  Configuration based process and knowledge management by structuring the software landscape of global operating industrial enterprises with microservices
  In: Procedia Manufacturing 24 (2018), S. 86-93
  ISSN: 2351-9789
  DOI: 10.1016/j.promfg.2018.06.013
  BibTeX: Download
• Schäffer E., Pownuk T., Walberer J., Fischer A., Schulz JP., Kleinschnitz M., Bartelt M., Kuhlenkötter B., Franke J.:
  System architecture and conception of a standardized robot configurator based on microservices
  In: Dr.-Ing. Thorsten Schüppstuhl, Prof. Dr.-Ing. Kirsten Tracht, Prof. Dr.-Ing. Jörg Franke (Hrsg.): Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter, Springer Vieweg, 2018, S. 159-166
  ISBN: 978-3-662-56713-5
  DOI: 10.1007/978-3-662-56714-2
  URL: http://www.springer.com/us/book/9783662567135
  BibTeX: Download
• Seefried J., Gläßel T., Rezler R., Franke J.:
  Optimization of the Process Reliability of the Ultrasonic Crimping Process by Evaluating the Mounting Conditions for Tubular Cable Lugs
  5th Green Factory Bavaria Colloquium (Nuremberg, 17. Juli 2018 - 18. Juli 2018)
  In: Franke J, Scholz M, Höft A (Hrsg.): Energy Efficiency in Strategy of Sustainable Production IV, Zurich, Switzerland: 2018
  DOI: 10.4028/www.scientific.net/AMM.882.119
  BibTeX: Download
• Seßner J., Lauer-Schmaltz M., Reitelshöfer S., Franke J.:
  Path Detection with Artificial Neural Networks for the Navigation of Visually Impaired Jogger
  Dritte Transdisziplinäre Konferenz "Technische Unterstützungssysteme, die die Menschen wirklich wollen" (Hamburg, 11. Dezember 2018 - 12. Dezember 2018)
  URL: http://www.humanhybridrobot.info/wp-content/uploads/2015/01/TCST-2018-Konferenzband-Technische-Unterstützungssysteme-die-die-Menschen-wirklich-wollen_komprimiert.pdf
  BibTeX: Download
• Sinaga N., Paryanto P., Widyanto SA., Rusnaldy R., Hetzner A., Franke J.:
  An analysis of the effect of gravitational load on the energy consumption of industrial robots
  6th CIRP Global Web Conference on Envisaging the Future Manufacturing, Design, Technologies and Systems in Innovation Era (CIRPe) (Shantou, 23. Oktober 2018 - 25. Oktober 2018)
  In: 6th CIRP Global Web Conference – Envisaging the future manufacturing, design, technologies and systems in innovation era (CIRPe 2018), AMSTERDAM: 2018
  DOI: 10.1016/j.procir.2018.09.043
  BibTeX: Download
• Steber D., Hübler J., Pruckner M.:
  A Comprehensive Electricity Market Model Using Simulation and Optimization Techniques
  2018 Winter Simulation Conference (Göteborg, 9. Dezember 2018 - 12. Dezember 2018)
  In: M. Rabe, A. A. Juan, N. Mustafee, A. Skoogh, S. Jain, and B. Johansson (Hrsg.): Proceedings of 2018 Winter Simulation Conference 2018
  BibTeX: Download
• Stoll T., Franke J.:
  Electrical and Mechanical Qualification of Selectively Dispensed Active Brazes
  2018 13th International Congress Molded Interconnect Devices (MID) (Würzburg, 25. September 2018 - 26. September 2018)
  DOI: 10.1109/ICMID.2018.8526981
  BibTeX: Download
• Stoll T., Kirstein M., Franke J.:
  Additive Manufacturing of 3D-copper-metallizations on Alumina by means of Selective Laser Melting for Power Electronic Applications
  In: Energietechnische Gesellschaft im VDE (ETG) (Hrsg.): CIPS 2018 10th International Conference on Integrated Power Electronic Systems, VDE Verlag, 2018, S. 337-342 (Proceedings March, 20 – 22, 2018, Stuttgart/Germany, Bd.156)
  ISBN: 978-3-8007-4540-1
  BibTeX: Download
• Tenner F., Eschner E., Lutz B., Schmidt M.:
  Development of a joining gap control system for laser welding of zinc-coated steel sheets driven by process observation
  In: Journal of Laser Applications (2018)
  ISSN: 1042-346X
  DOI: 10.2351/1.5040622
  BibTeX: Download
• Urban N., Kühl A., Glauche M., Franke J.:
  Additive Manufacturing of Neodymium-Iron-Boron Permanent Magnets
  In: 2018 8th International Electric Drives Production Conference (EDPC) 2018
  DOI: 10.1109/EDPC.2018.8658348
  BibTeX: Download
• Urban N., Meyer AW., Jeckel M., Leder M., Franke J.:
  Additive Manufacturing of an Electric Drive - A Feasibility Study
  In: IEEE (Hrsg.): 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2018, S. 1327-1331
  DOI: 10.1109/SPEEDAM.2018.8445258
  BibTeX: Download
• Urban N., Meyer AW., Keller V., Franke J.:
  Contribution of Additive Manufacturing of Rare Earth Material to the Increase in Performance and Resource Efficiency of Permanent Magnets
  In: AMM (Applied Mechanics and Materials), 2018, S. 135--141
  DOI: 10.4028/www.scientific.net/AMM.882.135
  BibTeX: Download
• Wang L., Süß-Wolf R., Ulm M., Franke J.:
  Investigation of the laser ablation threshold for optimizing Laser Direct Structuring in the 3D-MID technology
  2018 International Conference on Electronics Packaging and IMAPS All Asia Conference (ICEP-IAAC) (Kuwana, Mie, 17. April 2018 - 20. April 2018)
  In: ICEP-IAAC 2018 Proceedings, Piscataway, NJ: 2018
  DOI: 10.23919/ICEP.2018.8374339
  BibTeX: Download
• Weigelt M., Fröschl C., Masuch M., Riedel A., Franke J.:
  Erkenntnisse aus der Biegesimulation von Flachdraht
  In: Draht (2018), S. 18-20
  ISSN: 0012-5911
  URL: https://www.drahtmagazin.de/draht-forschung/erkenntnisse-aus-der%C2%A0biegesimulation-von%C2%A0flachdraht_34752_de/
  BibTeX: Download
• Weigelt M., Masuch M., Mayr A., Seefried J., Kühl A., Franke J.:
  Automated and Flexible Production of Inductive Charging Systems as an Enabler for the Breakthrough of Electric Mobility
  In: Schmitt, Robert; Schuh, Günther (Hrsg.): Advances in Production Research, Cham: Springer International Publishing, 2018, S. 300–309
  DOI: 10.1007/978-3-030-03451-1_30
  URL: https://link.springer.com/chapter/10.1007/978-3-030-03451-1_30
  BibTeX: Download
• Weigelt M., Mayr A., Böhm R., Kühl A., Franke J.:
  Quo vehis, Elektromobilität?
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 113 (2018), S. 59-63
  ISSN: 0932-0482
  DOI: 10.3139/104.111863
  URL: http://www.hanser-elibrary.com/doi/pdf/10.3139/104.111863
  BibTeX: Download
• Weigelt M., Mayr A., Böhm R., Kühl A., Franke J.:
  Quo vehis, Electromobility?
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 113 (2018), S. 59-63
  ISSN: 0932-0482
  DOI: 10.3139/104.111863
  URL: https://www.hanser-elibrary.com/doi/abs/10.3139/104.111863
  BibTeX: Download
• Weigelt M., Mayr A., Franke J.:
  Vergleich alternativer Technologien zur Reichweitenverlängerung von Elektrofahrzeugen
  7. Conference on Future Automotive Technology (Fürstenfeldbruck, 8. Mai 2018 - 9. Mai 2018)
  In: 7th Conference on Future Automotive Technology (CoFAT) 2018
  BibTeX: Download
• Weigelt M., Mayr A., Kühl A., Batz K., Bican P., Russer JA., Russer P., Franke J.:
  Techno-Economic Evaluation of Technological Alternatives to Extend the Range of Electric Vehicles
  5th Annual Conference on Electric Roads & Vehicles (Park City, Utah, 26. Februar 2018 - 27. Februar 2018)
  BibTeX: Download
  (anderer)
• Weigelt M., Mayr A., Masuch M., Batz K., Franke J., Bican P., Brem A., Russer JA., Russer P.:
  Techno-Economic Evaluation of Strategic Solutions to Extend the Range of Electric Vehicles
  8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 4. Dezember 2018 - 5. Dezember 2018)
  DOI: 10.1109/EDPC.2018.8658329
  URL: https://ieeexplore.ieee.org/document/8658329
  BibTeX: Download
• Weigelt M., Mayr A., Seefried J., Heisler P., Franke J.:
  Conceptual design of an intelligent ultrasonic crimping process using machine learning algorithms
  28th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2018) (Columbus, OH, 11. Juni 2018 - 14. Juni 2018)
  In: 28th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2018) 2018
  DOI: 10.1016/j.promfg.2018.10.015
  URL: https://www.sciencedirect.com/science/article/pii/S2351978918311314
  BibTeX: Download
• Weydanz WJ., Reisenweber H., Gottschalk A., Schulz M., Knoche T., Reinhart G., Masuch M., Franke J., Gilles R.:
  Visualization of electrolyte filling process and influence of vacuum during filling for hard case prismatic lithium ion cells by neutron imaging to optimize the production process
  In: Journal of Power Sources 380 (2018), S. 126 - 134
  ISSN: 0378-7753
  DOI: 10.1016/j.jpowsour.2018.01.081
  URL: https://www.sciencedirect.com/science/article/pii/S0378775318300818
  BibTeX: Download
• Yoo IS., Scheithauer EC., Sesselmann S., Franke J.:
  Entwicklung und Erprobung einer kosten- und funktionsoptimierten, mechatronischen Unterarmprothese
  3. Transdisziplinäre Konferenz – Technische Unterstützungssysteme, die die Menschen wirklich wollen (Hamburg, 11. Dezember 2018 - 12. Dezember 2018)
  BibTeX: Download
• Zhang X., Scholz M., Reitelshöfer S., Franke J.:
  An autonomous robotic system for intralogistics assisted by distributed smart camera network for navigation
  14th IEEE International Conference on Automation Science and Engineering (IEEE CASE) (Munich, 20. August 2018 - 24. August 2018)
  In: 2018 IEEE 14TH INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING (CASE), NEW YORK: 2018
  BibTeX: Download
• Ziegler M., Schneider M., Hubert M., Franke J.:
  Potentials of the Rotary Cutting Process for Electrical Steel Strip
  8th International Electric Drives Production Conference, EDPC 2018 (Schweinfurt, 4. Dezember 2018 - 5. Dezember 2018)
  In: 2018 8th International Electric Drives Production Conference, EDPC 2018 - Proceedings, NEW YORK: 2018
  DOI: 10.1109/EDPC.2018.8658297
  BibTeX: Download