en
de

Jörg Franke

Prof. Dr.-Ing. Jörg Franke

Tätigkeit: Leitung
Organisation: Department Maschinenbau (MB)
Abteilung: Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik (FAPS)
Telefonnummer: +49 9131 85-27569
Faxnummer: +49 9131 302528
E-Mail: joerg.franke@faps.fau.de
Webseite: http://www.faps.fau.de
Adresse:
Egerlandstr. 7
91058 Erlangen
Raum 0.036

Passende News

2020

04.03.2020: Neue Druckluftstation für die Forschungsfabrik und die Labore des Lehrstuhls FAPS AufAEG
11.02.2020: Best Presentation Award der IEEE ICMIMT 2020 für Marlene Kuhn
16.01.2020: FAPS Academic Award Night bildet gelungenen Start in das neue akademische FAPS-Jahr 2020

2019

2018

2017

2016

03.08.2016: Internationaler „Best Paper Award“ des InAES 2016 für Markus Hubert, Michael Spahr, Michael Weigelt und Jörg Franke

2015

2013

Publikationen

2021

BibTeX:

2020

Baloglu MV, Ziegler M, Franke J, Willner K:
Determination of equivalent transversely isotropic material parameters for sheet-layered lamination stacks
In: Mechanical Systems and Signal Processing 145 (2020)
ISSN: 0888-3270
DOI: 10.1016/j.ymssp.2020.106915
BibTeX:
Lipka M, Meinel D, Müller S, Sippel E, Franke J, Vossiek M:
A Wireless Angle and Position Tracking Concept for Live Data Control of Advanced, Semi-Automated Manufacturing Processes
In: Sensors (2020), S. 2589
ISSN: 1424-8220
DOI: 10.3390/s20092589
BibTeX:
Selmaier A, Martens B, Sjarov M, Kuhn M, Herbert M, Franke J:
Systematische Methodenauswahl bei der Digitalisierung
In: Werkstattstechnik WT WERKSTATTSTECHNIK BD. 110 (2020) (2020), S. 226-230
ISSN: 1436-5006
URL: https://e-paper.vdi-fachmedien.de/werkstattstechnik/2020#01-04-2020
BibTeX:
Lechler T, Zerreis M, Sitz S, Reinhard M, Franke J:
Simulation hochautomatisierter Serienproduktion - Produktivitätssteigerung im Ramp-Down
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (2020), S. 123 - 126
ISSN: 0932-0482
DOI: 10.3139/104.112248
BibTeX:
Praß J, Riedel J, Renz A, Franke J, Becker S:
Featured Highlight: Numerical Representation of the Operating Behavior of a Crossflow Friction Turbomachine
Ottawa, Ontario, Canada: Advances in Engineering, 2020
(General Engineering)
URL: https://advanceseng.com/numerical-representation-operating-behavior-crossflow-friction-turbomachine/
BibTeX:
Stoll T, Trautnitz P, Schmiedeke S, Franke J, Travitzky N:
Process development for laser powder bed fusion of pure copper
In: Proceedings of SPIE Proceedings Volume 11271, Laser 3D Manufacturing VII; 112710I (2020) (2020)
ISSN: 0277-786X
DOI: 10.1117/12.2563870
BibTeX:
Bodendorf F, Hollweck B, Franke J:
Technologieorientierte Softwarebewertung zur Unterstützung von Beschaffungsentscheidungen
In: Controlling 32 (2020), S. 53-61
ISSN: 0935-0381
DOI: 10.15358/0935-0381-2020-2-53
URL: https://www.beck-elibrary.de/10.15358/0935-0381-2020-2-53/technologieorientierte-softwarebewertung-zur-unterstuetzung-von-beschaffungsentscheidungen-jahrgang-32-2020-heft-2?page=1
BibTeX:
Kuhn M, Franke J:
Smart Manufacturing Traceability for Automotive E/E Systems enabled by Event-Driven Microservice Architecture
2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (Cape Town, 20.01.2020 - 22.01.2020)
DOI: 10.1109/ICMIMT49010.2020.9041240
BibTeX:
Gläßel T, Masuch M, Weigelt M, Kühl A, Franke J:
Schlussbericht zu dem Teilvorhaben "Automatisierte Fertigungstechnologien zum Biegen, Montieren und Schalten von innovativen Formspulenwicklungen" im Verbundprojekt "PRO-E-Traktion"
Zenodo, 2020
DOI: 10.5281/ZENODO.3691996
BibTeX:
Backhaus C, Hoffmann GA, Reitberger T, Eiche Y, Overmeyer L, Franke J, Lindlein N:
Analysis of additive manufactured polymer optical waveguides: measurement and simulation of their waviness
SPIE OPTO (San Francisco, California, United States, 01.02.2020 - 06.02.2020)
DOI: 10.1117/12.2543202
BibTeX:
Neermann S, Steindl M, Franke J, Mayer E, Schmidt M:
Qualification of NIR, UV and Laser Irradiation as Alternative Photonic Sintering Methods for Printed Electronics
2020 Pan Pacific Microelectronics Symposium, Pan Pacific 2020 (Kohala Coast, HI, 10.02.2020 - 13.02.2020)
DOI: 10.23919/PanPacific48324.2020.9059353
BibTeX:
Fröhlich J, Gräf D, Franke J, Hörber J, Hedges M:
Customizable Capacitive Sensor System Using Printed Electronics on Window Glass
2020 Pan Pacific Microelectronics Symposium (Kohala Coast, HI, 10.02.2020 - 13.02.2020)
DOI: 10.23919/PanPacific48324.2020.9059446
BibTeX:
Gläßel T, Seefried J, Kühl A, Franke J:
Skinning of insulated copper wires within the production chain of hairpin windings for electric traction drives
In: International Journal of Mechanical Engineering and Robotics Research 9 (2020), S. 163-169
ISSN: 2278-0149
DOI: 10.18178/ijmerr.9.2.163-169
BibTeX:
Benke E, Fehrle A, Ollech J, Schrampfer S, Franke J:
Architecture and low power management of a deep-tissue medical implant system powered by human body energy harvesting
13th International Conference on Biomedical Electronics and Devices, BIODEVICES 2020 - Part of 13th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2020 (Valletta, 24.02.2020 - 26.02.2020)
BibTeX:
Meiners M, Franke J:
Concept of a Machine Learning supported Cross-Machine Control Loop in the Ramp-Up of Large Series Manufacturing
2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (Cape Town, 20.01.2020 - 22.01.2020)
DOI: 10.1109/ICMIMT49010.2020.9041239
BibTeX:
Schäffer E, Thi K, Franke J:
Bedarf und Konzeptvorstellung des Forschungsprojekts ROBOTOP für einen webbasierten Konfigurator für den Massenmarkt
2020
DOI: 10.13140/RG.2.2.15152.30720
URL: https://www.researchgate.net/publication/338682435_Bedarf_und_Konzeptvorstellung_des_Forschungsprojekts_ROBOTOP_fur_einen_webbasierten_Konfigurator_fur_den_Massenmarkt
BibTeX:
Heisler P, Kuhn M, Süß-Wolf R, Franke J:
Innovative Solutions for the Covering Process in the Manufacturing of Wire Harnesses to Increase the Automation Degree
2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Kapstadt, 20.01.2020 - 22.04.2020)
DOI: 10.1109/ICMIMT49010.2020.9041165
BibTeX:
Rupp S, Müller R, Kerker S, Faltus F, Franke J:
Problemmanagement in Werker-Assistenz-Systemen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 115 (2020)
ISSN: 0932-0482
BibTeX:

2019

Skalon M, Görtler M, Meier B, Arneitz S, Urban N, Mitsche S, Huber C, Franke J, Sommitsch C:
Influence of Melt-Pool Stability in 3D Printing of NdFeB Magnets on Density and Magnetic Properties
In: Materials 13 (2019), S. 139
ISSN: 1996-1944
DOI: 10.3390/ma13010139
BibTeX:
Schäffer E, Schulz JP, Franke J:
Robotiklösungen im Baukastenprinzip für den Mittelstand
2019
URL: https://www.bigdata-insider.de/robotikloesungen-im-baukastenprinzip-fuer-den-mittelstand-a-882401/
BibTeX:
Bodendorf F, Franke J:
Machine Learning Based Cost Engineering of Automotive Parts – Lessons Learned
First International Symposium on Applied Artificial Intelligence (ISAAI) (Munich, 20.11.2019 - 21.11.2019)
DOI: 10.1007/s42354-019-0234-3
BibTeX:
Mayr A, Seefried J, Ziegler M, Masuch M, Mahr A, von Lindenfels J, Meiners M, Kißkalt D, Metzner M, Franke J:
Machine Learning in Electric Motor Production - Potentials, Challenges and Exemplary Applications
2019 9th International Electric Drives Production Conference (E|DPC) (Esslingen, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9011861
URL: https://ieeexplore.ieee.org/document/9011861/
BibTeX:
Gläßel T, Bachinski Pinhal D, Masuch M, Gerling D, Franke J:
Manufacturing Influences on the Motor Performance of Traction Drives with Hairpin Winding
9th IEEE Electric Drives Production Conference (E|DPC) (Esslingen, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9011872
BibTeX:
Masuch M, von Lindenfels J, Seefried J, Mayr A, Schneider M, Weigelt M, Kühl A, Franke J, Hemmer C:
Comparison of Additive Balancing Processes for Rotors in the Context of High Speed Electric Traction Motors
2019 9th International Electric Drives Production Conference (E|DPC) (Esslingen, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9012036
URL: https://ieeexplore.ieee.org/document/9012036/
BibTeX:
Ziegler M, Mayr A, Seefried J, Kühl A, Franke J:
Potentials of Process Monitoring During Laser Welding of Electrical Steel Laminations
2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9011918
URL: https://ieeexplore.ieee.org/document/9011918
BibTeX:
Mayr A, Dietze S, Herzog T, Schäffer E, Schäfer F, Bauer J, Fuchs J, Franke J:
Knowledge-based Support of the Production System Design by Semantic Technologies Using the Example of the Electric Motor Production
2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9011874
URL: https://ieeexplore.ieee.org/document/9011874
BibTeX:
Riedle H, Lee JC, Franke J:
Letter of Response Re: Design and fabrication of a generic 3D printed silicone unilateral CLP model
In: Journal of Plastic Reconstructive and Aesthetic Surgery (2019)
ISSN: 1748-6815
DOI: 10.1016/j.bjps.2019.11.037
BibTeX:
Urban N, Bauch L, Armbruster R, Franke J:
Evaluation of soft magnetic ferrosilicon FeSi6.5 for laser beam melting
2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, 03.12.2019 - 04.12.2019)
BibTeX:
Weigelt M, Kink J, Mayr A, von Lindenfels J, Kühl A, Franke J:
Digital Twin of the Linear Winding Process Based on Explicit Finite Element Method
2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9011857
URL: https://ieeexplore.ieee.org/document/9011857
BibTeX:
Shahsevani R, Reitelshofer S, Bodaghi MA, Franke J:
Development of new extensible components for enabling a more flexible usage of jamming-gripper
2019 IEEE International Conference on Robotics and Biomimetics, ROBIO 2019 (Dali, 06.12.2019 - 08.12.2019)
DOI: 10.1109/ROBIO49542.2019.8961834
BibTeX:
Bodendorf F, Merbele S, Franke J:
Predictive Cost Analytics of Vehicle Assemblies Based on Machine Learning in the Automotive Industry
2019 Pre-ICIS SIGDSA Symposium (München)
URL: https://aisel.aisnet.org/sigdsa2019/25
BibTeX:
Reissenweber L, Stadler A, von Lindenfels J, Franke J:
Improved thermal behavior of an electromagnetic linear actuator with different winding types and the influence on the complex impedance
9th International Electric Drives Production Conference, EDPC 2019 (Esslingen, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9011875
BibTeX:
Meiners M, Mayr A, Lechler T, Franke J:
Accelerated Production Ramp-Up Utilising Clustering and Visualisation of Process Chain Interrelationships
2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 03.12.2019 - 04.12.2019)
In: 2019 9th International Electric Drives Production Conference (EDPC), 2019

DOI: 10.1109/EDPC48408.2019.9011827
URL: https://ieeexplore.ieee.org/document/9011827
BibTeX:
von Lindenfels J, Urban N, Mayr A, Meyer AW, Franke J:
Advances in Quality Monitoring of Stray Fields on Rotors of Permanent Magnet Synchronous Motors
2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9012022
URL: https://ieeexplore.ieee.org/document/9012022
BibTeX:
Metzner M, Fiebag D, Mayr A, Franke J:
Automated Optical Inspection of Soldering Connections in Power Electronics Production Using Convolutional Neural Networks
2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 03.12.2019 - 04.12.2019)
DOI: 10.1109/EDPC48408.2019.9011820
URL: https://ieeexplore.ieee.org/document/9011820
BibTeX:
Selmaier A, Robitzch P, Mayr A, Fürst J, Franke J:
Cross-Process Quality Analysis of X-ray Tubes for Medical Applications Using Machine Learning Techniques
In: Wulfsberg J., Hintze W., Behrens BA. (Hrsg.): Production at the leading edge of technology, Berlin, Heidelberg: Springer Vieweg, 2019
ISBN: 978-3-662-60417-5
DOI: 10.1007/978-3-662-60417-5_51
URL: https://link.springer.com/chapter/10.1007/978-3-662-60417-5_51
BibTeX:
Hefner F, Herbert M, Sjarov M, Süß-Wolf R, Franke J:
Robot-based automated production of wrapped connections with single solid round wires
In: Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens (Hrsg.): Production at the leading edge of technology, Springer, 2019
ISBN: 9783662604168
DOI: 10.1007/978-3-662-60417-5_43
BibTeX:
von Lindenfels J, Ziegler M, Kneidl M, Kühl A, Franke J:
Challenges in bonding processes in the production of electric motors
9th Congress of the German Academic Association for Production Technology (WGP) (Hamburg, 30.09.2019 - 02.10.2019)
DOI: 10.1007/978-3-662-60417-5
URL: https://www.springer.com/gp/book/9783662604168#aboutBook
BibTeX:
Weigelt M, Mayr A, Kühl A, Franke J:
Methodical Comparison of Alternative Powertrain Technologies for Long-Distance Mobility Using Germany as an Example
In: WEVJ (World Electric Vehicle Journal), 2019
DOI: 10.3390/wevj10040077
URL: https://www.mdpi.com/2032-6653/10/4/77
BibTeX:
Heisler P, Gick S, Franke J:
Innovative trennmittelarme Fertigungskonzepte für die Schaumteilherstellung in der Serienfertigung
In: Werkstoffe in der Fertigung (2019), S. 24-26
ISSN: 0939-2629
BibTeX:
Metzner M, Weissert S, Karlidag E, Albrecht F, Blank A, Mayr A, Franke J:
Virtual Commissioning of 6 DoF Pose Estimation and Robotic Bin Picking Systems for Industrial Parts
In: IFAC-PapersOnLine 52 (2019), S. 160-164
ISSN: 2405-8963
DOI: 10.1016/j.ifacol.2019.10.040
URL: https://www.sciencedirect.com/science/article/pii/S240589631930895X
BibTeX:
Braun T, Franke J:
Baustoff-integrierte Flächenheizung (BiFH): Abschlussbericht
Stuttgart: Fraunhofer IRB Verlag, 2019
(Forschungsinitiative Zukunft Bau, Bd.F 3177)
ISBN: 3738803963
URL: https://www.irbnet.de/daten/rswb/19089016129.pdf
BibTeX:
Fuchs J, Schmidt J, Franke J, Rehman K, Karnouskos S, Sauer M:
I4.0-compliant integration of assets utilizing the Asset Administration Shell
2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (Zaragoza, 10.09.2019 - 13.09.2019)
DOI: 10.1109/ETFA.2019.8869255
BibTeX:
Bodendorf F, Franke J:
Practices and Trends of Evaluating Software Prices in Procurement - An Empirical Study
Clute International Academic Conferences (Las Vegas, 13.10.2019 - 16.10.2019)
URL: https://www.cluteinstitute.com/conference-proceedings/lv19proceedings.pdf
BibTeX:
Schäffer E, Fröhlig S, Mayr A, Franke J:
A method for collaborative knowledge acquisition and modeling enabling the development of a knowledge-based configurator of robot-based automation solutions
In: Procedia CIRP 7th CIRP Global Web Conference – Towards shifted production value stream patterns through inference of data, models, and technology (2019), S. 92-97
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.01.018
URL: https://www.researchgate.net/publication/339345450_A_method_for_collaborative_knowledge_acquisition_and_modeling_enabling_the_development_of_a_knowledge-based_configurator_of_robot-based_automation_solutions
BibTeX:
Mayr A, Kißkalt D, Meiners M, Lutz B, Schäfer F, Seidel R, Selmaier A, Fuchs J, Metzner M, Blank A, Franke J:
Machine Learning in Production – Potentials, Challenges and Exemplary Applications
7th CIRP Global Web Conference – Towards shifted production value stream patterns through inference of data, models, and technology (CIRPe 2019) (Online, 16.10.2019 - 18.10.2019)
DOI: 10.1016/j.procir.2020.01.035
URL: https://www.sciencedirect.com/science/article/pii/S2212827120300445?via=ihub
BibTeX:
Bauer J, Hoffmann H, Feld T, Runge M, Hinz O, Mayr A, Förster K, Teske F, Schäfer F, Konrad C, Franke J:
ForeSight - Platform Approach for Enabling AI-based Services for Smart Living
17th International Conference on Smart Living and Public Health, ICOST 2019 (New York City, NY, 14.10.2019 - 16.10.2019)
DOI: 10.1007/978-3-030-32785-9_19
URL: https://link.springer.com/chapter/10.1007/978-3-030-32785-9_19
BibTeX:
Schäffer E, Mayr A, Fuchs J, Sjarov M, Vorndran J, Franke J:
Microservice-based architecture for engineering tools enabling a collaborative multi-user configuration of robot-based automation solutions
In: Procedia CIRP 7th CIRP Global Web Conference – Towards shifted production value stream patterns through inference of data, models, and technology (2019), S. 86-91
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.01.017
URL: https://www.researchgate.net/publication/339348125_Microservice-based_architecture_for_engineering_tools_enabling_a_collaborative_multi-user_configuration_of_robot-based_automation_solutions
BibTeX:
Sippel M, Lomakin K, Ankenbrand M, Petersen M, Franke J, Helmreich K, Vossiek M, Gold G:
3D-Printed Bowtie Filter Created by High Precision NanoJet System Combined with Novel Printing Strategy
28th Conference on Electrical Performance of Electronic Packages and Systems (EPEPS 2019) (Montreal, Kanada)
BibTeX:
Kühl A, Riedel A, Gläßel T, Masuch M, Franke J:
Robot-based Production of Electric Motors with Hairpin Winding Technolgy
International Conference on Intelligent Automation (ICIAR) 2019 (San Francisco, 22.10.2019 - 24.10.2019)
BibTeX:
Bodendorf F, Franke J:
Risk Assessment of Data Transfer Between Partners in the Automotive Supply Chain
Logistik Management 2019 (Halle (Saale), 18.09.2019 - 20.09.2019)
URL: https://lm2019.uni-halle.de/files/2019/09/boa-15.pdf
BibTeX:
Stenzel D, Schwarzer C, Schnepf M, Chew LM, Blank T, Franke J, Kaloudis M:
Characterization of alternative sinter materials for power electronics
22nd European Microelectronics and Packaging Conference and Exhibition, EMPC 2019 (Pisa, 16.09.2019 - 19.09.2019)
DOI: 10.23919/EMPC44848.2019.8951880
BibTeX:
Schwarzer C, Hensel A, Roth F, Merz C, Franke J, Kaloudis M:
Investigation of pressureless sintered interconnections on plasma based additive copper metallization for 3-dimentional ceramic substrates in high temperature applications
22nd European Microelectronics and Packaging Conference and Exhibition, EMPC 2019 (Pisa, 16.09.2019 - 19.09.2019)
DOI: 10.23919/EMPC44848.2019.8951873
BibTeX:
Baier L, Frommherz J, Nöth E, Donhauser T, Schuderer P, Franke J:
Identifying failure root causes by visualizing parameter interdependencies with spectrograms
In: Journal of Manufacturing Systems 53 (2019), S. 11-17
ISSN: 0278-6125
DOI: 10.1016/j.jmsy.2019.08.002
BibTeX:
Zeitler JT, Reitberger T, Reichle A, Backhaus C, Lindlein N, Franke J:
Technical Modelling Approach for Spatial Integrated Optomechatronic Products
29th CIRP Design Conference 2019 (Póvoa de Varzim, 08.05.2019 - 10.09.2019)
DOI: 10.1016/j.procir.2019.03.266
BibTeX:
Blank A, Hiller M, Zhang S, Leser A, Metzner M, Lieret M, Thielecke J, Franke J:
6DoF Pose-Estimation Pipeline for Texture-less Industrial Components in Bin Picking Applications
2019 European Conference on Mobile Robots (ECMR) (Prag, 04.09.2019 - 30.08.2019)
DOI: 10.1109/ECMR.2019.8870920
BibTeX:
Metzner M, Krieg L, Merhof J, Ködel T, Franke J:
Intuitive Interaction with Virtual Commissioning of Production Systems for Design Validation
In: Procedia CIRP 84 (2019), S. 892-895
ISSN: 2212-8271
DOI: 10.1016/j.procir.2019.08.004
BibTeX:
Backhaus C, Lindlein N, Zeitler JT, Franke J:
Beeinflussung der optischen Eigenschaften von Polymer Optischen Wellenleitern durch das Druckpfad-Design
120. Jahrestagung der Deutschen Gesellschaft für angewandte Optik (Darmstadt, 11.06.2019 - 15.06.2019)
URL: https://www.dgao-proceedings.de/
BibTeX:
Donhauser T, Kißkalt D, Mayr A, Scholz M, Schuderer P, Franke J:
Integration maschineller Lernverfahren in eine Materialflusssimulation zur Verhaltensabstraktion und -vorhersage komplexer Fertigungssysteme
In: Putz, Matthias; Schlegel, Andreas (Hrsg.): ASIM 2019 - Simulation in Produktion und Logistik, Auerbach /Vogtl.: Wissenschaftliche Scripten, 2019
ISBN: 978-3-95735-113-5
URL: http://www.asim-fachtagung-spl.de/asim2019/papers/02_Proof_156.pdf
BibTeX:
Donhauser T, Mayr A, Baier L, Franke J:
Verfolgung von Bauteil- und Anlagentemperaturen in Produktionssystemen zur Energiesimulation bei thermischen Einflussfaktoren
In: Putz M, Schlegel A (Hrsg.): ASIM 2019 - Simulation in Produktion und Logistik, Auerbach /Vogtl.: Wissenschaftliche Scripten, 2019
ISBN: 978-3-95735-113-5
URL: http://www.asim-fachtagung-spl.de/asim2019/papers/16_Proof_173.pdf
BibTeX:
Seefried J, Gläßel T, Kühl A, Mayr A, Franke J:
Experimental Evaluation of Tool Geometries for the Ultrasonic Crimping Process for Tubular Cable Lugs
2019 IEEE Holm Conference on Electrical Contacts (Milwaukee, WI, USA, 14.09.2019 - 18.09.2019)
DOI: 10.1109/HOLM.2019.8923709
URL: https://ieeexplore.ieee.org/document/8923709
BibTeX:
Steglich M, Löwe C, Bauernschmitt B, Rehtanz C, Böhm R, Franke J:
A novel method to reduce the harmonic currents in the residual earth fault current during a single phase to ground fault in compensated grids
2019 IEEE PES Innovative Smart Grid Technologies Europe, ISGT-Europe 2019 (Bucharest, 29.09.2019 - 02.10.2019)
DOI: 10.1109/ISGTEurope.2019.8905599
BibTeX:
Heuss L, Blank A, Dengler S, Zikeli GL, Reinhart G, Franke J:
Modular Robot Software Framework for the Intelligent and Flexible Composition of Its Skills
Advances in Production Management Systems (APMS) (Austin, Texas, 01.09.2019 - 05.09.2019)
DOI: 10.1007/978-3-030-30000-5_32
BibTeX:
Stoll T, Kirstein M, Franke J:
A novel approach of copper-ceramic-joints manufactured by selective laser melting
In: Proceedings of SPIE Proceedings Volume 11101, Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems IV; 1110109 (2019) (2019)
ISSN: 0277-786X
DOI: 10.1117/12.2529422
BibTeX:
Gläßel T, Seefried J, Masuch M, Riedel A, Mayr A, Kühl A, Franke J:
Process Reliable Laser Welding of Hairpin Windings for Automotive Traction Drives
IEEE International Conference on Engineering, Science, and Industrial Applications (ICESI) (Tokyo, Japan, 22.08.2019 - 24.08.2019)
DOI: 10.1109/ICESI.2019.8863004
URL: https://ieeexplore.ieee.org/document/8863004
BibTeX:
Lieret M, Kogan V, Döll S, Franke J:
Automated in-house transportation of small load carriers with autonomous unmanned aerial vehicles
CASE 2019 - International Conference on Automation Science and Engineering (University of British Columbia, Vancouver, BC, Canada, 22.08.2019 - 26.09.2019)
DOI: 10.1109/COASE.2019.8843183
URL: https://ieeexplore.ieee.org/document/8843183
BibTeX:
Riedel A, Roessert A, Kühl A, Franke J:
Calculation of the Copper Filling Factor of Electric Traction Drives including Graphical Representation
22nd International Conference on Electrical Machines and Systems, ICEMS 2019 (Harbin, 11.08.2019 - 14.08.2019)
DOI: 10.1109/ICEMS.2019.8922428
BibTeX:
Fuchs J, Hartner F, Brossog M, Franke J:
Auswahl industrieller Serviceplattformen
In: wt Werkstattstechnik - Online (2019)
ISSN: 1436-4980
URL: https://www.werkstattstechnik.de/wt/get_article.php?data[article_id]=92101
BibTeX:
Reitberger T, Zeitler JT, Backhaus C, Hoffmann GA, Wienke A, Lorenz L, Bock K, Wolter KJ, Suttmann O, Overmeyer L, Lindlein N, Franke J:
Modeling, Simulation and Manufacturing of Polymer Optical Waveguides by Using the OPTAVER Process
Applied Industrial Optics: Spectroscopy, Imaging and Metrology 2019
DOI: 10.1364/AIO.2019.T2A.1
BibTeX:
Lechler T, Fischer E, Metzner M, Mayr A, Franke J:
Virtual Commissioning – Scientific review and exploratory use cases in advanced production systems
In: Procedia CIRP 81 (2019), S. 1125–1130
ISSN: 2212-8271
DOI: 10.1016/j.procir.2019.03.278
URL: https://www.sciencedirect.com/science/article/pii/S2212827119305839
BibTeX:
Ochmann J, Laumer S, Franke J:
The power of knowledge: A literature review on socio-technical perspectives on organizational knowledge management
Proceedings of the 2019 Americas Conference on Information Systems (Cancun, Mexico)
BibTeX:
Bodendorf F, Meissner T, Franke J:
Valuating and Pricing of Vehicle Generated Data as a Marketable Product in the Automotive Industry
The Eighth International Conference on Advances in Vehicular Systems, Technologies and Applications VEHICULAR 2019 (Rom, 30.06.2019 - 04.07.2019)
URL: http://thinkmind.org/index.php?view=instance&instance=VEHICULAR+2019
BibTeX:
Schäffer E, Mayr A, Huber T, Höflinger T, Einecke M, Franke J:
Gradual tool-based optimization of engineering processes aiming at a knowledge-based configuration of robot-based automation solutions
In: Procedia CIRP 81 (2019), S. 736-741
ISSN: 2212-8271
DOI: 10.1016/j.procir.2019.03.186
URL: https://www.sciencedirect.com/science/article/pii/S2212827119304913
BibTeX:
Mayr A, Lechler T, Donhauser T, Metzner M, Schäffer E, Fischer E, Franke J:
Advances in energy-related plant simulation by considering load and temperature profiles in discrete event simulation
In: Procedia CIRP 81 (2019), S. 1325-1330
ISSN: 2212-8271
DOI: 10.1016/j.procir.2019.04.021
URL: https://www.sciencedirect.com/science/article/pii/S2212827119306353
BibTeX:
Fuchs J, Oks SJ, Franke J:
Platform-based service composition for manufacturing: A conceptualization
In: Procedia CIRP 81 (2019), S. 541-546
ISSN: 2212-8271
DOI: 10.1016/j.procir.2019.03.152
URL: https://www.sciencedirect.com/science/article/pii/S2212827119304573
BibTeX:
Ziegler M, Biburger M, Kühl A, Franke J:
Influences of joining process parameters on stator and rotor cores for electric drives
16th International Conference on Electrical Machines, Drives and Power Systems, ELMA 2019 (Varna, 06.06.2019 - 08.06.2019)
DOI: 10.1109/ELMA.2019.8771687
BibTeX:
Mahr A, Mayr A, Jung T, Franke J:
Robot-assisted concept for assembling form coils in laminated stator cores of large electric motors
In: Procedia Manufacturing 38 (2019), S. 866-875
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2020.01.168
URL: https://www.sciencedirect.com/science/article/pii/S2351978920301694
BibTeX:
Praß J, Riedel J, Renz A, Franke J, Becker S:
Numerical representation of the operating behavior of a cross‐flow friction turbomachine
In: Chemical Engineering & Technology 42 (2019), S. 1853-1860
ISSN: 0930-7516
DOI: 10.1002/ceat.201800655
BibTeX:
Metzner M, Barth F, Bönig J, Franke J:
Methodology for digital planning and virtual validation of retroactively automated assembly systems
In: Schüppstuhl T., Tracht K., Roßmann J. (Hrsg.): Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter, Berlin, Heidelberg: Springer Vieweg, 2019
ISBN: 978-3-662-59316-5
DOI: 10.1007/978-3-662-59317-2_15
URL: https://link.springer.com/chapter/10.1007/978-3-662-59317-2_15
BibTeX:
Kühl A, Zitzelsberger M, Seefried J, Masuch M, Miller T, Franke J:
Hot crimping through innovative inductive heating in the production of electric motors
11th IEEE International Electric Machines and Drives Conference, IEMDC 2019 (San Diego, CA, USA, 12.05.2019 - 15.05.2019)
DOI: 10.1109/IEMDC.2019.8785316
BibTeX:
Seidel R, Mayr A, Schäfer F, Kißkalt D, Franke J:
Towards a Smart Electronics Production Using Machine Learning Techniques
42nd International Spring Seminar on Electronics Technology (ISSE) (Wroclaw, Poland, 15.09.2019 - 19.05.2019)
In: International Spring Seminar on Electronics Technology, ISSE 2019 -- 2019 42th International Spring Seminar, 2019

DOI: 10.1109/ISSE.2019.8810176
URL: https://ieeexplore.ieee.org/document/8810176
BibTeX:
Scholz M, Zwingel M, Schuderer P, Franke J:
Sustainable Intralogistics due to Uniform Software and Modular Transport Entities
26th CIRP Conference on Life Cycle Engineering (LCE) (Purdue University, West Lafayette, IN, 07.05.2019 - 09.05.2019)
DOI: 10.1016/j.procir.2019.01.033
URL: https://www.sciencedirect.com/science/article/pii/S2212827119300356
BibTeX:
Bakakeu J, Brossog M, Zeitler JT, Franke J, Tolksdorf S, Klos H, Peschke J:
Automated reasoning and knowledge inference on OPC UA information models
2019 IEEE International Conference on Industrial Cyber Physical Systems, ICPS 2019 (Taipei, 06.05.2019 - 09.05.2019)
DOI: 10.1109/ICPHYS.2019.8780114
BibTeX:
Kuhn M, Nguyen HG, Otten H, Franke J:
Blockchain Enabled Traceability – Securing Process Quality in Manufacturing Chains in the Age of Autonomous Driving
IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD) (Marrakesch, 21.11.2018 - 23.11.2018)
DOI: 10.1109/ITMC.2018.8691242
BibTeX:
Ankenbrand M, Eiche Y, Franke J:
Programming and evaluation of a multi-Axis/multi-process manufacturing system for mechatronic integrated devices
2019 International Conference on Electronics Packaging, ICEP 2019 (Niigata, 17.04.2019 - 20.04.2019)
DOI: 10.23919/ICEP.2019.8733548
BibTeX:
Selmaier A, Donhauser T, Lechler T, Zeitler JT, Franke J:
Simulationsgestützte Produktionsplanung flexibler Fertigungssysteme
In: wt Werkstattstechnik - Online wt-online 2019 (2019), S. Seite 240-247
ISSN: 1436-4980
URL: https://www.werkstattstechnik.de/wt/currentarticle.php?data[article_id]=91523
BibTeX:
Wang L, Fu Z, Süß-Wolf R, Travitzky N, Greil P, Franke J:
Laser-Associated Selective Metallization of Ceramic Surface With Infrared Nanosecond Laser Technology
In: Advanced Engineering Materials 10 (2019), S. 1900096
ISSN: 1438-1656
DOI: 10.1002/adem.201900096
BibTeX:
Mayr A, Lutz B, Weigelt M, Gläßel T, Seefried J, Kißkalt D, Franke J:
Elektromotorenproduktion 4.0: Potenziale des maschinellen Lernens in der Elektromotorenproduktion am Beispiel des Laserschweißens von Hairpins
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 114 (2019), S. 145-149
ISSN: 0932-0482
DOI: 10.3139/104.112051
URL: https://www.hanser-elibrary.com/doi/abs/10.3139/104.112051
BibTeX:
Schäfer F, Mayr A, Hess A, Zeiselmair C, Otten H, Franke J:
Six Sigma 4.0: Data Mining als unterstützende Technologie im Null-Fehler-Management
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 114 (2019), S. 140-144
ISSN: 0932-0482
DOI: 10.3139/104.112047
URL: https://www.hanser-elibrary.com/doi/abs/10.3139/104.112047?journalCode=zwf
BibTeX:
Schäfer F, Schwulera E, Otten H, Franke J:
From Descriptive to Predictive Six Sigma: Machine Learning for Predictive Maintenance
IEEE Artificial Intelligence for Industries (Laguna Hills, California, 25.09.2019 - 27.09.2019)
DOI: 10.1109/AI4I46381.2019.00017
URL: https://ieeexplore.ieee.org/document/9027777
BibTeX:
Schäffer E, Penczek L, Mayr A, Bakakeu Ngassam RJ, Franke J, Kuhlenkötter B:
Digitalisierung im Engineering – Ein Ansatz für ein Vorgehensmodell zur durchgehenden, arbeitsteiligen Modellierung am Beispiel von AutomationML
In: Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse 1.2019 (2019), S. 61-66
ISSN: 1434-1980
DOI: 10.30844/I40M_19-1_S61-66
URL: http://www.industrie-management.de/node/256
BibTeX:
Praß J, Wannemacher H, Franke J, Becker S:
The Influence of Different Arrangements of Shallow Dimples on the Resistance of Plates Subjected to Relative Fluid Motion
In: Technische Mechanik 39 (2019), S. 39 - 50
ISSN: 0232-3869
DOI: 10.24352/UB.OVGU-2019-005
BibTeX:
Backhaus C, Vögl C, Zeitler JT, Reitberger T, Lindlein N, Franke J:
Optical simulations of printed Polymer Optical Waveguides (POWs): search for their optical limitations caused by fabrication and application geometryBibTeX:
Hamilton DP, Syed Khaja AH, Franke J, Mawby P:
High temperature thermal cycling reliability of silver sintered and electroplated tin based transient liquid phase joints
9th International Conference on Integrated Power Electronics Systems, CIPS 2016 (Nuremberg, 08.03.2016 - 10.03.2016)
BibTeX:
Riedle H, Braunias K, Mukai B, Franke J:
Experimental Mechanical Examination of Artificial 3D Printed and Post Processed Vascular Silicone Models *DOI: 10.1109/EMBC.2019.8856888
BibTeX:
Tur B, Fischer E, Franke J, Bergs C, Schulze C:
Modelling of Energy Storage Devices and Converters for Energy Flow Simulation in Plant Simulation
In: Putz M, Schlegel A (Hrsg.): ASIM 2019, Auerbach /Vogtl.: Wissenschaftliche Scripten, 2019
ISBN: 978-3-95735-113-5
BibTeX:
Javied T, Deutsch M, Franke J:
A model for integrating energy management in lean production
29th CIRP Design Conference, CIRP Design 2019 (Povoa de Varzim, 08.05.2019 - 10.05.2019)
DOI: 10.1016/j.procir.2019.04.252
BibTeX:
Lorenz L, Ott L, Nieweglowski K, Reitberger T, Franke J, Bock K:
Evaluation of the coupling performance and long-term stability of aerosol jet printed and photolithographic manufactured waveguides for asymmetric optical bus couplers
Optical Interconnects XIX 2019 (San Francisco, CA, 05.02.2019 - 07.02.2019)
DOI: 10.1117/12.2506598
BibTeX:
Gläßel T, Seefried J, Kühl A, Franke J:
Skinning of Insulated Copper Wires within the Production Chain of Hairpin Windings for Electric Traction Drives
Asia Conference on Material and Manufacturing Technology [ACMMT 2018] (Beijing, 14.09.2018 - 16.09.2018)
BibTeX:
Fuchs J, Hartner F, Brossog M, Franke J:
Auswahl industrieller Serviceplattformen - Methodisches Vorgehen zur Auswahl geeigneter cloudbasierter IIoT-Plattformlösungen
In: wt Werkstattstechnik - Online 109 (2019), S. 537-542
ISSN: 1436-4980
BibTeX:
Lomakin K, Ankenbrand M, Sippel M, Franke J, Helmreich K, Gold G:
Nanojet 3D Printed Coplanar Waveguides on Flexible Polyimide Substrate up to 24 GHz
1st IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS 2019) (Glasgow, 07.07.2019 - 10.07.2019)
BibTeX:
Lutz B, Kißkalt D, Regulin D, Reisch R, Schiffler A, Franke J:
Evaluation of Deep Learning for Semantic Image Segmentation in Tool Condition Monitoring
2019 18th IEEE International Conference On Machine Learning And Applications (ICMLA) (Boca Raton, Florida)
DOI: 10.1109/ICMLA47014.2019
BibTeX:
Seßner J, Ramer C, Manert M, Reitelshöfer S, Franke J:
Robust Obstacle Mapping for Visually Impaired Jogger on Less Structured Paths
2019 IEEE/SICE International Symposium on System Integration (Paris, France, 14.01.2019 - 16.01.2019)
DOI: 10.1109/SII.2019.8700339
BibTeX:
Metzner M, Heinlein P, Wytopil B, Donhauser T, Franke J:
Evaluation der virtuellen Absicherung hybrider Montagesysteme mittels Kinematik- und Ergonomiesimulationswerkzeugen
In: Putz M, Schlegel A (Hrsg.): ASIM 2019, Auerbach /Vogtl.: Wissenschaftliche Scripten, 2019
ISBN: 978-3-95735-113-5
BibTeX:
Bräuer P, Kuhn T, Müller M, Franke J:
Reliability of Molded Interconnect Devices regarding Crack Initiation and Overmolding
International Spring Seminar on Electronics Technology, ISSE 2019 -- 2019 42th International Spring Seminar (Wroclaw, 15.05.2019 - 19.05.2019)
In: International Spring Seminar on Electronics Technology, ISSE 2019 -- 2019 42th International Spring Seminar, NEW YORK: IEEE, 2019

DOI: 10.1109/ISSE.2019.8810264
URL: https://ieeexplore.ieee.org/document/8810264
BibTeX:
Scholz M, Degel M, Franke J:
Distributed Software Architecture for Type-Specific AGV Routing
4. Kongresses Montage Handhabung Industrieroboter
DOI: 10.1007/978-3-662-59317-2_6
BibTeX:
Javied T, Huprich S, Franke J:
Cloud based Energy Management System Compatible with the Industry 4.0 Requirements
13th International-Federation-of-Automatic-Control (IFAC) Workshop on Intelligent Manufacturing Systems (IMS) (Oshawa, CANADA, 12.08.2019 - 14.08.2019)
DOI: 10.1016/j.ifacol.2019.10.018
BibTeX:
Hoffmann C, Praß J, Uhlemann T, Franke J:
Improving the energy efficiency of industrial drying processes: a computational fluid dynamics approach
In: Procedia Manufacturing 33 (2019), S. 422 - 429
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2019.04.052
URL: https://www.sciencedirect.com/science/article/pii/S2351978919305293
BibTeX:
Böhm R, Steglich M, Rehtanz C, Paulsburg M, Datsevich S, Brunner B, Franke J:
Control of a Hybrid Energy Storage System for a Hybrid Compensation System
In: Chemical Engineering & Technology (2019)
ISSN: 0930-7516
DOI: 10.1002/ceat.201800652
BibTeX:
Scholz M, Lieret M, Bigott M, Franke J:
Distributed Software Architecture for AGVs for Separation of Dynamic and Static Obstacles
29th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) (Limerick, 24.06.2019 - 28.06.2019)
DOI: 10.1016/j.promfg.2020.01.047
URL: https://www.sciencedirect.com/science/article/pii/S2351978920300482
BibTeX:
Riedle H, Burkhardt AE, Seitz V, Pachaly B, Reid RR, Lee JC, Franke J:
Design and fabrication of a generic 3D-printed silicone unilateral cleft lip and palate model
In: Journal of Plastic Reconstructive and Aesthetic Surgery (2019)
ISSN: 1748-6815
DOI: 10.1016/j.bjps.2019.06.030
BibTeX:
Scholz M, Franke J:
Servicebasierte Auftragsallokation
In: Handling (2019), S. 6 - 7
ISSN: 0936-7365
BibTeX:
Syed Khaja AH, Franke J:
Process optimization in transient liquid phase soldering (TLPS) for an efficient and economical production of high temperature power electronics
9th International Conference on Integrated Power Electronics Systems, CIPS 2016 (Nuremberg, 08.03.2016 - 10.03.2016)
BibTeX:

2018

Riedel A, Masuch M, Weigelt M, Gläßel T, Kühl A, Reinstein S, Franke J:
Challenges of the Hairpin Technology for Production Techniques
2018 21st International Conference on Electrical Machines and Systems (ICEMS) (Jeju, 07.10.2018 - 10.10.2018)
DOI: 10.23919/ICEMS.2018.8549105
URL: https://ieeexplore.ieee.org/document/8549105
BibTeX:
Metzner M, Bickel B, Mayr A, Franke J:
Simulation-Assisted Method for Evaluating Innovative Production Technologies for Electric Traction Motors
8th International Electric Drives Production Conference (EDPC) (Schweinfurt, Germany, 04.12.2018 - 05.12.2018)
DOI: 10.1109/EDPC.2018.8658353
URL: https://ieeexplore.ieee.org/document/8658353
BibTeX:
Ziegler M, Schneider M, Hubert M, Franke J:
Potentials of the Rotary Cutting Process for Electrical Steel Strip
8th International Electric Drives Production Conference, EDPC 2018 (Schweinfurt, 04.12.2018 - 05.12.2018)
DOI: 10.1109/EDPC.2018.8658297
BibTeX:
Bauer J, Gründel L, Seßner J, Meiners M, Lieret M, Lechler T, Konrad C, Franke J:
CAMERA-BASED FALL DETECTION SYSTEM WITH THE SERVICE ROBOT SANBOT ELF
Smart Public Building (Stuttgart, 19.10.2018 - 20.06.2019)
BibTeX:
Mayr A, Lutz B, Weigelt M, Gläßel T, Kißkalt D, Masuch M, Riedel A, Franke J:
Evaluation of Machine Learning for Quality Monitoring of Laser Welding Using the Example of the Contacting of Hairpin Windings
8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 04.12.2018 - 05.12.2018)
DOI: 10.1109/EDPC.2018.8658346
URL: https://ieeexplore.ieee.org/document/8658346
BibTeX:
Seßner J, Lauer-Schmaltz M, Reitelshöfer S, Franke J:
Path Detection with Artificial Neural Networks for the Navigation of Visually Impaired Jogger
Dritte Transdisziplinäre Konferenz "Technische Unterstützungssysteme, die die Menschen wirklich wollen" (Hamburg, 11.12.2018 - 12.12.2018)
URL: http://www.humanhybridrobot.info/wp-content/uploads/2015/01/TCST-2018-Konferenzband-Technische-Unterstützungssysteme-die-die-Menschen-wirklich-wollen_komprimiert.pdf
BibTeX:
Kißkalt D, Mayr A, von Lindenfels J, Franke J:
Towards a Data-Driven Process Monitoring for Machining Operations Using the Example of Electric Drive Production
8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 04.12.2018 - 05.12.2018)
DOI: 10.1109/EDPC.2018.8658293
URL: https://ieeexplore.ieee.org/document/8658293
BibTeX:
Meyer AW, von Lindenfels J, Mayr A, Franke J:
Manufacturing Imperfections in Electric Motor Production with Focus on Halbach Array Permanent Magnet Rotor Assembly
8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 04.12.2018 - 05.12.2018)
DOI: 10.1109/EDPC.2018.8658282
URL: https://ieeexplore.ieee.org/document/8658282
BibTeX:
Weigelt M, Mayr A, Masuch M, Batz K, Franke J, Bican P, Brem A, Russer JA, Russer P:
Techno-Economic Evaluation of Strategic Solutions to Extend the Range of Electric Vehicles
8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 04.12.2018 - 05.12.2018)
DOI: 10.1109/EDPC.2018.8658329
URL: https://ieeexplore.ieee.org/document/8658329
BibTeX:
Bauer J, Bakakeu Ngassam R, Hopfengärtner M, Bürner J, Braun T, Schäfer F, Wittmann M, Fehrle A, Maußner B, Lechler T, Meiners M, Konrad C, Franke J:
SMARTLOCATE – INDOOR LOCALIZATION WITH BLUETOOTH BEACONS AND SMARTPHONE SENSORS
Smart Public Building 2018 (Stuttgart, 19.10.2018 - 20.10.2018)
URL: http://www.hft-stuttgart.de/Forschung/i_city/Handlungsfelder/Explorative-Projekte-i-city/Dokumente/pdfgesamt/de/
BibTeX:
Mayr A, Weigelt M, von Lindenfels J, Seefried J, Ziegler M, Mahr A, Urban N, Kühl A, Hüttel F, Franke J:
Electric Motor Production 4.0 – Application Potentials of Industry 4.0 Technologies in the Manufacturing of Electric Motors
8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 04.12.2018 - 05.12.2018)
DOI: 10.1109/EDPC.2018.8658294
URL: https://ieeexplore.ieee.org/document/8658294
BibTeX:
Neermann S, Scheetz M, Franke J, Roudenko J, Schirmer J, Reichenberger M:
Substrate pretreatments: an investigation of the effects on aerosol jet printed structures
WGP-Jahreskongress
DOI: 10.1007/978-3-030-03451-1_35
BibTeX:
Heisler P, Gick S, Franke J:
The way to a simple and environment-friendly production design of complex foam parts – innovative solutions for the polyurethane manufacturing industry
International Conference in Flexible Automation and Intelligent Manufacturing (FAIM) (Columbus, Ohio, 10.06.2018 - 14.06.2018)
DOI: 10.1016/j.promfg.2018.10.099
BibTeX:
Stoll T, Franke J:
Electrical and Mechanical Qualification of Selectively Dispensed Active Brazes
2018 13th International Congress Molded Interconnect Devices (MID) (Würzburg, 25.09.2018 - 26.09.2018)
DOI: 10.1109/ICMID.2018.8526981
BibTeX:
Faltus F, Fischer E, Franke J:
Annäherung an den Digitalen Wandel
In: Handling 46 (2018), S. 6-7
ISSN: 0936-7365
BibTeX:
Mayr A, Meyer AW, Schäffer E, Masuch M, von Lindenfels J, Mössinger G, Franke J:
Towards a Knowledge-Based Design Methodology for Managing the Complexity in the Integrated Product and Process Development of Electric Motors
In: Schmitt, Robert; Schuh, Günther (Hrsg.): Advances in Production Research, Cham: Springer International Publishing, 2018
DOI: 10.1007/978-3-030-03451-1_12
URL: https://link.springer.com/chapter/10.1007/978-3-030-03451-1_12
BibTeX:
Weigelt M, Masuch M, Mayr A, Seefried J, Kühl A, Franke J:
Automated and Flexible Production of Inductive Charging Systems as an Enabler for the Breakthrough of Electric Mobility
In: Schmitt, Robert; Schuh, Günther (Hrsg.): Advances in Production Research, Cham: Springer International Publishing, 2018
DOI: 10.1007/978-3-030-03451-1_30
URL: https://link.springer.com/chapter/10.1007/978-3-030-03451-1_30
BibTeX:
Kohn S, Blank A, Puljiz D, Zenkel L, Bieber O, Hein B, Franke J:
Towards a Real-Time Environment Reconstruction for VR-Based Teleoperation Through Model Segmentation
2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Madrid, 01.10.2018 - 05.10.2018)
DOI: 10.1109/IROS.2018.8594053
BibTeX:
Friedlein M, Gräf D, Jaumann A, Raiser F, Franke J:
Occurrence and Influence of Fretting Corrosion on Receptacle Contact Resistance
2018 IEEE Holm Conference on Electrical Contacts (Albuquerque, 14.10.2018 - 18.10.2018)
DOI: 10.1109/HOLM.2018.8611669
BibTeX:
Reitberger T, Stoll T, Hoffmann GA, Lorenz L, Neermann S, Overmeyer L, Bock K, Wolter KJ, Franke J:
The future of short-range high-speed data transmission: printed polymer optical waveguides (POW) innovation, fabrication, and challenges
In: Proceedings of SPIE Proc. SPIE 10751, Optics and Photonics for Information Processing XII (2018)
ISSN: 0277-786X
DOI: 10.1117/12.2318752
BibTeX:
Gläßel T, Baat F, Schwinghammer D, Seefried J, Kühl A, Franke J:
Infrared laser based contacting of bar-wound windings in the field of electric drives production
10th CIRP Conference on Photonic Technologies [LANE 2018] (Fuerth, 03.09.2018 - 06.09.2018)
DOI: 10.1016/j.procir.2018.08.005
BibTeX:
Praß J, Wannemacher H, Franke J, Becker S:
Investigation of the influence of dimples on the resistance of overflowed plates
Conference on Modelling Fluid Flow (CMFF’18) (Budapest, 04.09.2018 - 07.09.2018)
BibTeX:
Urban N, Meyer AW, Jeckel M, Leder M, Franke J:
Additive Manufacturing of an Electric Drive - A Feasibility Study
In: IEEE (Hrsg.): 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2018
DOI: 10.1109/SPEEDAM.2018.8445258
BibTeX:
Lorenz L, Nieweglowski K, Wolter KJ, Bock K, Hoffmann GA, Overmeyer L, Reitberger T, Franke J:
Additive waveguide manufacturing for optical bus couplers by aerosol jet printing using conditioned flexible substrates
21st European Microelectronics and Packaging Conference and Exhibition, EMPC 2017 (Warschau, 10.09.2017 - 13.09.2017)
DOI: 10.23919/EMPC.2017.8346857
BibTeX:
Schirmer J, Roudenko J, Reichenberger M, Neermann S, Franke J:
Adhesion Measurements for Printed Electronics: A Novel Approach to Cross Cut Testing
41st International Spring Seminar on Electronics Technology (ISSE) (Zlatibor, 16.05.2018 - 20.05.2018)
DOI: 10.1109/ISSE.2018.8443665
BibTeX:
Schirmer J, Roudenko J, Reichenberger M, Neermann S, Franke J:
Print Quality Assessment by Image Processing Methods for Printed Electronics Applications
2018 41st International Spring Seminar on Electronics Technology (ISSE) (Zlatibor, 16.05.2018 - 20.05.2018)
DOI: 10.1109/ISSE.2018.8443617
BibTeX:
Freiherr von Lindenfels J, Heyder A, Funk S, Pigler S, Franke J:
Contribution to the Reduction of Annealing Processes in the Manufacturing of Valve Solenoids by Using Inline Measuring Technology in the Caulking Process
Integration of Sustainable Energy Expo & Conference (iSEnEC) (NürnbergConvention Center West, 17.07.2018 - 18.07.2018)
BibTeX:
Schäffer E, Leibinger H, Stamm A, Brossog M, Franke J:
Configuration based process and knowledge management by structuring the software landscape of global operating industrial enterprises with microservices
In: Procedia Manufacturing 24 (2018), S. 86-93
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.06.013
BibTeX:
Bakakeu Ngassam R, Bauer J, Tolksdorf S, Klos HH, Peschke J, Fehrle A, Eberlein W, Bürner J, Brossog M, Jahn L, Franke J:
An Artificial Intelligence Approach for Online Energy Optimization of Flexible Manufacturing Systems
iSEnEC: Integration of Sustainable Energy Conference (Nürnberg, 17.07.2018 - 18.07.2018)
DOI: 10.4028/www.scientific.net/AMM.882.96
URL: https://www.scientific.net/AMM.882.96
BibTeX:
Mayr A, Weigelt M, Masuch M, Adrion M, Bauer A, Wirsinger K, Franke J:
Sustainability Aspects of Current Market Developments, Different Product Types and Innovative Manufacturing Processes of Electric Motors
Integration of Sustainable Energy Conference (iSEneC) (Nuremberg, 17.07.2018 - 18.07.2018)
DOI: 10.4028/www.scientific.net/AMM.882.64
URL: https://www.scientific.net/AMM.882.64
BibTeX:
Mayr A, Meyer AW, Masuch M, Braun A, Franke J:
Towards a Software System Providing Knowledge about Energy and Resource Efficiency Potentials within the Product and Process Development of Electric Drives
Integration of Sustainable Energy Conference (iSEneC) (Nuremberg, 17.07.2018 - 18.07.2018)
DOI: 10.4028/www.scientific.net/AMM.882.53
URL: https://www.scientific.net/AMM.882.53
BibTeX:
Donhauser T, Ebersbach T, Franke J, Schuderer P:
Rolling-reactive Optimization of Production Processes in a Calcium Silicate Masonry Unit Plant Using Online Simulation
In: Procedia CIRP 72 (2018), S. 249-254
ISSN: 2212-8271
DOI: 10.1016/j.procir.2018.03.266
BibTeX:
Wang L, Süß-Wolf R, Ulm M, Franke J:
Investigation of the laser ablation threshold for optimizing Laser Direct Structuring in the 3D-MID technology
2018 International Conference on Electronics Packaging and IMAPS All Asia Conference (ICEP-IAAC) (Kuwana, Mie, 17.04.2018 - 20.04.2018)
DOI: 10.23919/ICEP.2018.8374339
BibTeX:
Mayr A, Weigelt M, Masuch M, Meiners M, Hüttel F, Franke J:
Application Scenarios of Artificial Intelligence in Electric Drives Production
4th International Conference on System-Integrated Intelligence: Intelligent, Flexible and Connected Systems in Products and Production (Hannover, 19.06.2018 - 20.07.2018)
DOI: 10.1016/j.promfg.2018.06.006
URL: http://www.sciencedirect.com/science/article/pii/S2351978918305237
BibTeX:
Weigelt M, Mayr A, Seefried J, Heisler P, Franke J:
Conceptual design of an intelligent ultrasonic crimping process using machine learning algorithms
28th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2018) (Columbus, OH, 11.06.2018 - 14.06.2018)
DOI: 10.1016/j.promfg.2018.10.015
URL: https://www.sciencedirect.com/science/article/pii/S2351978918311314
BibTeX:
Metzner M, Bönig J, Blank A, Schäffer E, Franke J:
“Human-In-The-Loop”- Virtual Commissioning of Human-Robot Collaboration Systems
In: Dr.-Ing. Thorsten Schüppstuhl, Prof. Dr.-Ing. Kirsten Tracht, Prof. Dr.-Ing. Jörg Franke (Hrsg.): Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter, Springer Vieweg, 2018
ISBN: 978-3-662-56713-5
DOI: 10.1007/978-3-662-56714-2
URL: http://www.springer.com/us/book/9783662567135
BibTeX: Download
Blank A, Seßner J, Yoo IS, Metzner M, Deichsel F, Diercks T, Eberlein D, Felden D, Leser A, Franke J:
Bag Bin-Picking Based on an Adjustable, Sensor-Integrated Suction Gripper
In: Dr.-Ing. Thorsten Schüppstuhl, Prof. Dr.-Ing. Kirsten Tracht, Prof. Dr.-Ing. Jörg Franke (Hrsg.): Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter, Wiesbaden: Springer Vieweg, 2018
ISBN: 978-3-662-56713-5
DOI: 10.1007/978-3-662-56714-2
BibTeX: Download
Mayr A, Weigelt M, Kühl A, Grimm S, Erll A, Potzel M, Franke J:
Lean 4.0 - A conceptual conjunction of lean management and Industry 4.0
51st CIRP Conference on Manufacturing Systems (Stockholm, Sweden, 16.05.2018 - 18.05.2018)
DOI: 10.1016/j.procir.2018.03.292
URL: https://www.sciencedirect.com/science/article/pii/S2212827118304736
BibTeX:
Hensel A, Lê TA, Sauermann A, Franke J:
Investigations on Measuring the Thermal Conductivity of Alumina Substrates with Laser Flash Analysis
International Spring Seminar on Electronics Technology, Institute of Electrical and Electronics Engineers et al. 2018 – 2018 41st International Spring Seminar (Zlatibor, Serbia)
DOI: 10.1109/ISSE.2018.8443661
BibTeX:
Weigelt M, Mayr A, Franke J:
Vergleich alternativer Technologien zur Reichweitenverlängerung von Elektrofahrzeugen
7. Conference on Future Automotive Technology (Fürstenfeldbruck, 08.05.2018 - 09.05.2018)
BibTeX:
Donhauser T, Baier L, Ebersbach T, Franke J, Schuderer P:
Simulationbasierte Optimierung von Fabrikabläufen: Implementierung und Test eines Algorithmus zur ereignisbasierten Regelung der Materialflüsse
In: wt Werkstattstechnik - Online 108 (2018), S. 221--227
ISSN: 1436-4980
URL: https://www.werkstattstechnik.de/wt/article.php?data[article_id]=89357
BibTeX:
Stoll T, Kirstein M, Franke J:
Additive Manufacturing of 3D-copper-metallizations on Alumina by means of Selective Laser Melting for Power Electronic Applications
In: Energietechnische Gesellschaft im VDE (ETG) (Hrsg.): CIPS 2018 10th International Conference on Integrated Power Electronic Systems, VDE Verlag, 2018 (Proceedings March, 20 – 22, 2018, Stuttgart/Germany, Bd.156)
ISBN: 978-3-8007-4540-1
BibTeX: Download
Weydanz WJ, Reisenweber H, Gottschalk A, Schulz M, Knoche T, Reinhart G, Masuch M, Franke J, Gilles R:
Visualization of electrolyte filling process and influence of vacuum during filling for hard case prismatic lithium ion cells by neutron imaging to optimize the production process
In: Journal of Power Sources 380 (2018), S. 126 - 134
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2018.01.081
URL: https://www.sciencedirect.com/science/article/pii/S0378775318300818
BibTeX: Download
Weigelt M, Mayr A, Böhm R, Kühl A, Franke J:
Quo vehis, Elektromobilität?
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 113 (2018), S. 59-63
ISSN: 0932-0482
DOI: 10.3139/104.111863
URL: http://www.hanser-elibrary.com/doi/pdf/10.3139/104.111863
BibTeX: Download
Kühl A, Kreitlein S, Höft A, Franke J:
Energy efficient processes of electric motor manufacturing
Texas Power and Energy Conference (TPEC) (Texas A&M, College Station, TX, USA, 08.02.2018 - 09.06.2018)
DOI: 10.1109/TPEC.2018.8312076
BibTeX:
Weigelt M, Mayr A, Böhm R, Kühl A, Franke J:
Quo vehis, Electromobility?
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 113 (2018), S. 59-63
ISSN: 0932-0482
DOI: 10.3139/104.111863
URL: https://www.hanser-elibrary.com/doi/abs/10.3139/104.111863
BibTeX:
Fischer A, Kuhn T, Drummer D, Franke J:
Effect of talc on the metal adhesion of laser-structured polymer parts
13th International Congress Molded Interconnect Devices (Würzburg, 26.09.2018 - 26.09.2018)
BibTeX:
Praß J, Bürner J, Franke J:
Energieeffiziente Raumbelüftung mit Wärmerückgewinnung unter Verwendung eines neuartigen Wirkprinzips
In: Umwelt-Technologie und Energie in Bayern (2018), S. 46-47
BibTeX:
Riedle H, Molz P, Franke J:
Determination of the Mechanical Properties of Cardiac Tissue for 3D Printed Surgical Models
IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES) (Kuching, MALAYSIA, 03.12.2018 - 06.12.2018)
DOI: 10.1109/IECBES.2018.8626728
BibTeX:
Riedle H, Mukai B, Molz P, Franke J:
Determination of the Mechanical Properties of Aortic Tissue for 3D Printed Surgical Models
2018 11th Biomedical Engineering International Conference (BMEiCON) (Chiang Mai, 21.11.2018 - 24.11.2018)
DOI: 10.1109/BMEiCON.2018.8609983
BibTeX:
Hensel A, Müller M, Franke J:
Einfluss der Beschichtungssequenz auf die Bauteiltemperatur während eines plasmabasierten Kupferbeschichtungsprozesses auf unterschiedlichen Substratmaterialien
Elektronische Baugruppen und Leiterplatten EBL 2018 (Fellbach, Deutschland)
BibTeX:
Baier L, Spindler S, Wacker M, Franke J, Schuderer P:
Defining Batches under Consideration of Quality-Related Factors for Improved Failure and Scrap Analysis
In: Applied Mechanics and Materials 882 (2018), S. 17--23
ISSN: 1660-9336
DOI: 10.4028/www.scientific.net/AMM.882.17
BibTeX:
Kißkalt D, Fleischmann H, Kreitlein S, Knott M, Franke J:
A novel approach for data‑driven process and condition monitoring systems on the example of mill‑turn centers
In: Production Engineering (2018)
ISSN: 0944-6524
DOI: 10.1007/s11740-018-0797-0
URL: https://link.springer.com/article/10.1007/s11740-018-0797-0
BibTeX: Download
Böhm R, Weindl C, Franke J:
Control of a hybrid storage system (HSS) comprising a RedOx-Flow Battery and a High Speed Flywheel for a hybrid compensation system
IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe) (Sarajevo, 21.10.2018 - 25.10.2018)
BibTeX:
Urban N, Meyer AW, Keller V, Franke J:
Contribution of Additive Manufacturing of Rare Earth Material to the Increase in Performance and Resource Efficiency of Permanent Magnets
In: AMM (Applied Mechanics and Materials), 2018
DOI: 10.4028/www.scientific.net/AMM.882.135
BibTeX:
Schäffer E, Bartelt M, Pownuk T, Schulz JP, Kuhlenkötter B, Franke J:
Configurators as the basis for the transfer of knowledge and standardized communication in the context of robotics
In: Procedia CIRP 72 (2018), S. 310-315
ISSN: 2212-8271
DOI: 10.1016/j.procir.2018.03.190
BibTeX:
Bogner E, Löwen U, Franke J:
Bedeutung der zukünftigen Produktion kundenindividueller Produkte in Losgröße 1
In: Redlich, Tobias; Moritz, Manuel; Wulfsberg, Jens P. (Hrsg.): Vernetzt – Dezentral – Kollaborativ. Interdisziplinäre Perspektiven zur Zukunft der Wertschöpfung, Berlin: Springer Verlag, 2018
BibTeX: Download
Zhang X, Scholz M, Reitelshöfer S, Franke J:
An autonomous robotic system for intralogistics assisted by distributed smart camera network for navigation
14th IEEE International Conference on Automation Science and Engineering (IEEE CASE) (Munich, 20.08.2018 - 24.08.2018)
BibTeX:
Sinaga N, Paryanto P, Widyanto SA, Rusnaldy R, Hetzner A, Franke J:
An analysis of the effect of gravitational load on the energy consumption of industrial robots
6th CIRP Global Web Conference on Envisaging the Future Manufacturing, Design, Technologies and Systems in Innovation Era (CIRPe) (Shantou, 23.10.2018 - 25.10.2018)
DOI: 10.1016/j.procir.2018.09.043
BibTeX:
Urban N, Kühl A, Glauche M, Franke J:
Additive Manufacturing of Neodymium-Iron-Boron Permanent MagnetsDOI: 10.1109/EDPC.2018.8658348
BibTeX:
Scholz M, Zhang X, Kreitlein S, Franke J:
Decentralized Intelligence: The Key for an Energy Efficient and Sustainable Intralogistics
15th Global Conference on Sustainable Manufacturing
DOI: 10.1016/j.promfg.2018.02.171
BibTeX: Download
Praß J, Bürner J, Franke J:
Energy-efficient room ventilation with heat recovery using a novel concept
In: Environment and Energy in Bavaria (2018), S. 29-30
BibTeX:
Scholz M, Zhang X, Franke J:
Implementation of an Intralogistics Routing-Service Basing on Decentralized Workspace Digitization
5th Green Factory Bavaria Colloquium - iSEnEC 2018 (Nürnberg, 17.07.2018 - 18.07.2018)
DOI: 10.4028/www.scientific.net/AMM.882.90
BibTeX:
Hahn D, Braun T, Franke J:
Entwicklung und Evaluierung eines Systems zur automatisierten Prüfung von im Plasmabeschichtungsprozess additiv gefertigten Leiterbahnstrukturen für elektronische Baugruppen
Gemeinschaftsveranstaltung von DVS – Deutscher Verband für Schweißen und verwandte Verfahren e. V. und GMM – VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (Hg.) 2018 – Elektronische Baugruppen und Leiterplatten (Fellbach, 20.02.2018 - 21.02.2018)
BibTeX:
Weigelt M, Mayr A, Kühl A, Batz K, Bican P, Russer JA, Russer P, Franke J:
Techno-Economic Evaluation of Technological Alternatives to Extend the Range of Electric Vehicles
5th Annual Conference on Electric Roads & Vehicles (Park City, Utah, 26.02.2018 - 27.02.2018)
BibTeX: Download
Schäffer E, Pownuk T, Walberer J, Fischer A, Schulz JP, Kleinschnitz M, Bartelt M, Kuhlenkötter B, Franke J:
System architecture and conception of a standardized robot configurator based on microservices
In: Dr.-Ing. Thorsten Schüppstuhl, Prof. Dr.-Ing. Kirsten Tracht, Prof. Dr.-Ing. Jörg Franke (Hrsg.): Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter, Springer Vieweg, 2018
ISBN: 978-3-662-56713-5
DOI: 10.1007/978-3-662-56714-2
URL: http://www.springer.com/us/book/9783662567135
BibTeX:
Lomakin K, Sippel M, Gold G, Ringel J, Weiß D, Helmreich K, Ankenbrand M, Franke J:
Substituting bond wires by additively manufactured interconnectionsDOI: 10.23919/gemic.2018.8335106
BibTeX:
Gräf D, Neermann S, Stuber L, Scheetz M, Franke J:
Pushing the Boundaries of 3D-MID: Pulse-Width Modulated Light Technology for Enhancing Surface Properties and Enabling Printed Electronics on FFF-Printed StructuresDOI: 10.1109/ICMID.2018.8526995
BibTeX:
Sand C, Lechler T, Schuh P, Franke J:
Potentials for Error Detection and Process Visualization in Assembly Lines Using a Parallel Coordinates PlotDOI: 10.4028/www.scientific.net/AMM.882.10
BibTeX:
Seefried J, Gläßel T, Rezler R, Franke J:
Optimization of the Process Reliability of the Ultrasonic Crimping Process by Evaluating the Mounting Conditions for Tubular Cable Lugs
5th Green Factory Bavaria Colloquium (Nuremberg, 17.07.2018 - 18.07.2018)
In: Franke J, Scholz M, Höft A (Hrsg.): Energy efficiency in strategy of sustainable production IV, Zurich, Switzerland: Trans Tech Publications, Ltd, 2018

DOI: 10.4028/www.scientific.net/AMM.882.119
BibTeX:
Böhm R, Praß J, Bürner J, Franke J:
Neue Ansätze für Energiemanagement und Energieeffizienz in der Produktion
In: Umwelt-Technologie und Energie in Bayern (2018), S. 40 - 41
BibTeX:
Bakakeu J, Fuchs J, Javied T, Brossog M, Franke J, Klos H, Eberlein W, Tolksdorf S, Peschke J, Jahn L:
Multi-Objective Design Space Exploration for the Integration of Advanced Analytics in Cyber-Physical Production Systems
IEEE International Conference on Industrial Engineering and Engineering Management (IEEE IEEM) (Bangkok, THAILAND, 16.12.2018 - 19.12.2018)
BibTeX:
Lomakin K, Fröhlich J, Gold G, Fröhlich J, Helmreich K, Ankenbrand M, Franke J:
Low reflective aerosol Jet printed broadband matched load up to 67 GHzDOI: 10.23919/gemic.2018.8335109
BibTeX:
Schirmer J, Eisen K, Reichenberger M, Roudenko J, Neermann S, Franke J:
Long-Term Behavior of SMT Components Mounted on Printed Polymer Thick Film Pastes
13th International Congress Molded Interconnect Devices (MID)
DOI: 10.1109/ICMID.2018.8526939
BibTeX:
Landgraf M, Ollech J, Klemm T, Schaude J, Reitelshöfer S, Franke J:
Lightweight Control Method for Dielectric Elastomer Actuators as Self-Sensing Artificial Muscles
2nd IEEE International Conference on Cyborg and Bionic Systems (CBS) (Shenzhen, 25.10.2018 - 27.10.2018)
BibTeX:
Gläßel T, Spreng S, Franke J:
Kontaktierverfahren für lackisolierte Leiter
2018
BibTeX:
Hensel A, Schwarzer C, Scheetz M, Kaloudis M, Franke J:
Investigations of Silver Sintered Interconnections 3-Dimensional Ceramics with Plasma Based Additive Copper Metallizations
20th IEEE Electronics Packaging Technology Conference (EPTC) (Singapore, 04.12.2018 - 07.12.2018)
BibTeX:
Braun T, Böhm R, Praß J, Baierl U, Hahn D, Franke J:
Investigation of Alternative Applications of Electrically Functionalized Surfaces Using the Plasma-Coating-Technology
In: Robert Schmitt, Günther Schuh (Hrsg.): Advances in Production Research - Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19–20, 2018, Switzerland: Springer Nature, 2018
ISBN: 978-3-030-03450-4
DOI: 10.1007/978-3-030-03451-1
BibTeX:
Yoo IS, Scheithauer EC, Sesselmann S, Franke J:
Entwicklung und Erprobung einer kosten- und funktionsoptimierten, mechatronischen Unterarmprothese
3. Transdisziplinäre Konferenz – Technische Unterstützungssysteme, die die Menschen wirklich wollen (Hamburg, 11.12.2018 - 12.12.2018)
BibTeX:
Scholz M, Donhauser T, Franke J:
Integration eines Multi-Agenten-Systems in eine Ereignisdiskrete Materialflusssimulation
Tagung der ASIM/GI-Fachgruppen 2018 (Heilbronn, 08.03.2018 - 09.03.2018)
BibTeX:
Heisler P, Gick S, Franke J:
Innovative, release agent-reduced manufacturing concepts for the manual series production of complex foam parts
4th International Conference on Control, Automation and Robotics (ICCAR) (Auckland, 20.04.2018 - 23.04.2018)
DOI: 10.1109/ICCAR.2018.8384654
BibTeX:
Müller M, Franke J:
Innovative Approach of efficient High Humidity and High Temperature Reverse Bias Testing as significant Qualification Method for Power Electronic Modules
20th IEEE Electronics Packaging Technology Conference (EPTC) (Singapore, 04.12.2018 - 07.12.2018)
BibTeX:
Ischdonat N, Dreyer C, Gräf D, Franke J, Horber J, Hedges M:
Influences of Manufacturing Sequences for the Application of Printed Electronics on Aircraft Interior ComponentsDOI: 10.1109/ICMID.2018.8526932
BibTeX:
Roudenko J, Schirmer J, Reichenberger M, Neermann S, Franke J:
Influence of convection sintering parameters on electrical conductivity and adhesion of inkjet-printed silver nanoparticle inks on flexible substrates
13th International Congress Molded Interconnect Devices (MID)
DOI: 10.1109/ICMID.2018.8527048
BibTeX:
Bürner J, Praß J, Franke J:
Identifikation von Lastmanagementpotenzialen im Umfeld des privaten Wohnens
In: Umwelt-Technologie und Energie in Bayern (2018), S. 42 - 43
BibTeX:
Bürner J, Praß J, Franke J:
Identification of demand side management potentials within the sector of domestic living
In: Environment and Energy in Bavaria (2018)
BibTeX:
Landgraf M, Yoo IS, Seßner J, Mooser M, Kaufmann D, Mattejat D, Reitelshöfer S, Franke J:
Gesture Recognition with Sensor Data Fusion of Two Complementary Sensing Methods
7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob) (Enschede, 26.08.2018 - 29.08.2018)
BibTeX:
Riedle H, Seitz V, Schraudolf L, Franke J:
Generation of 3D Silicone Models of Anatomic Soft Tissue Structures - A Comparison of Direct 3D Printing and Molding Techniques
IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES) (Kuching, MALAYSIA, 03.12.2018 - 06.12.2018)
DOI: 10.1109/IECBES.2018.8626687
BibTeX:
Ankenbrand M, Scheetz M, Franke J, Lomakin K, Sippel M, Gold G, Helmreich K:
Generation of 3D Functional Structures for High- Frequency Applications by Printing Technologies
2018 13th International Congress Molded Interconnect Devices (MID)
DOI: 10.1109/ICMID.2018.8527052
BibTeX:
Sand C, Meiners M, Eberle J, Franke J:
Evaluation of energy measurements for error detection in press-fitting processes
In: Small-scale Intelligent Manufacturing Systems (SIMS), 2018 2nd International Symposium on, 2018
BibTeX:
Lomakin K, Pavlenko T, Ankenbrand M, Sippel M, Ringel J, Scheetz M, Klemm T, Gräf D, Helmreich K, Franke J, Gold G:
Evaluation and Characterization of 3D Printed Pyramid Horn Antennas utilizing different Deposition Techniques for Conductive Material
In: IEEE Transactions on Components, Packaging and Manufacturing Technology (2018), S. 1-1
ISSN: 2156-3950
DOI: 10.1109/tcpmt.2018.2871931
BibTeX:
Ankenbrand M, Franke J, Lomakin K, Pavlenko T, Sippel M, Gold G, Weidner T, Weiß D, Helmreich K:
Erzeugung von 3D-Funktionsstrukturen fuer Hochfrequenzanwendungen durch Druckverfahren
In: PLUS - Produktion von Leiterplatten und Systemen (2018)
BibTeX:
Weigelt M, Fröschl C, Masuch M, Riedel A, Franke J:
Erkenntnisse aus der Biegesimulation von Flachdraht
In: Draht (2018), S. 18-20
ISSN: 0012-5911
URL: https://www.drahtmagazin.de/draht-forschung/erkenntnisse-aus-der%C2%A0biegesimulation-von%C2%A0flachdraht_34752_de/
BibTeX: Download
Böhner J, Scholz M, Franke J, Sauer A:
Integrating digitization technologies into resource efficiency driven industrial learning environments
8th CIRP Conference on Learning Factories - Advanced Engineering Education & Training for Manufacturing Innovation
DOI: 10.1016/j.promfg.2018.03.158
BibTeX:
Lomakin K, Pavlenko T, Sippel M, Gold G, Weidner T, Helmreich K, Ankenbrand M, Franke J:
3D Printed Helix AntennaDOI: 10.1049/cp.2018.1034
BibTeX:

2017

Rinck P, Blank A, Zäh M, Franke J:
Mobile Roboterplattformen: Ein neues Team in der Fabrik
Stuttgart: WEKA BUSINESS MEDIEN GmbH, c/o Zenit, 2017
(handling, Bd.handling)
URL: https://www.handling.de/robotertechnik/mobile-roboterplattformen-ein-neues-team-in-der-fabrik.htm
BibTeX: Download
Sand C, Schuh P, Lechler T, Franke J:
Data analysis and error detection in assembly lines using a three-dimensional visualization techniqueDOI: 10.1109/EDPC.2017.8328167
BibTeX:
Schäfer F, Brandmeier MA, Kuhn M, Franke J, Otten H:
Case Based Reasoning im Qualitätsmanagement
In: wt Werkstattstechnik - Online 107 (2017), S. 786-792
ISSN: 1436-4980
BibTeX: Download
Weigelt M, Riedel A, Masuch M, Mahr A, Gläßel T, Franke J:
Potentials of an Explicit Finite Element Analysis of the Bending Processes for Coated Copper Wires
7th International Electric Drives Production Conference (EDPC), 2017 (Wuerzburg, Germany, 05.12.2017 - 06.12.2017)
DOI: 10.1109/EDPC.2017.8328151
BibTeX: Download
Hell MM, Yoo IS, Achenbach S, Franke J, Blachutzik F, Roether J, Graf V, Raaz-Schrauder D, Marwan M, Schlundt C:
3D printing for sizing left atrial appendage closure device: head-to-head comparison with computed tomography and transoesophageal echocardiography.
In: EuroIntervention : journal of EuroPCR in collaboration with the Working Group on Interventional Cardiology of the European Society of Cardiology 13 (2017), S. 1234-1241
ISSN: 1969-6213
DOI: 10.4244/EIJ-D-17-00359
BibTeX: Download
Zeitler JT, Kühn C, Urban N, Franke J:
Engineering von mechatronischen Baugruppen für die additive Fertigung
In: Konstruktion (2017), S. 67-82
ISSN: 0720-5953
URL: http://www.ingenieur.de/Konstruktion/2017/Ausgabe-11-12/Praxis-Forschung-Wissenschaft/Engineering-von-mechatronischen-Baugruppen-fuer-die-additive-Fertigung
BibTeX: Download
Loosen F, Backhaus C, Zeitler JT, Hoffmann GA, Reitberger T, Lorenz L, Lindlein N, Franke J, Overmeyer L, Suttmann O, Wolter KJ, Bock K:
Approach for the production chain of printed polymer optical waveguides–an overview
In: Applied Optics 56 (2017), S. 8607-8617
ISSN: 2155-3165
DOI: 10.1364/AO.56.008607
BibTeX: Download
Stoll T, Syed Khaja AH, Franke J:
Prototyping and Production of High-temperature Power Electronic Substrates through Additive Manufacturing Processes
In: Journal of Microelectronics and Electronic Packaging (2017), S. 761-767
ISSN: 1551-4897
DOI: 10.4071/isom-2017-THP51_10
BibTeX: Download
Hensel A, Müller M, Franke J, Kohlmann-von Platen K:
System Concept of a Robust and Reproducible Plasma-Based Coating Process for the Manufacturing of Power Electronic Applications
7. WGP Jahreskongress (RWTH Aachen, 05.10.2017 - 06.10.2017)
BibTeX: Download
Schäffer E, Beck A, Eberle J, Metzner M, Blank A, Seßner J, Franke J:
Analyzing the Impact of Object Distances, Surface Textures and lnterferences on the Image Quality of Low-Cost RGB-D Consumer Cameras for the Use in lndustrial Applications
7. WGP-Jahreskongress (Aachen, 05.10.2017 - 06.10.2017)
BibTeX: Download
Ebell N, Bott A, Beck T, Bürner J, Praß J, Franke J:
Model of a Power-to-Gas System with Fuel Cell in a Mixed Integer Linear Program for the Energy Supply of Residential and Commercial Buildings
In: Applied Mechanics and Materials 871 (2017), S. 11--19
ISSN: 1660-9336
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMM.871.11
URL: https://www.scientific.net/Paper/Preview/525041
BibTeX: Download
Schwarzer C, Fuchs D, Rauer M, Xu P, Krügelstein A, Franke J, Kaloudis M:
Investigation of the Influence of Voids n the Reliability of Solder Joints by Finite Element Method
SMTA International (Rosemont, 13.09.2017 - 18.09.2017)
BibTeX:
Böhm R, Franke J:
Demand-Side-Management by flexible generation of compressed air
The 50th CIRP Conference on Manufacturing Systems (CMS) (Taichung, 02.05.2017 - 05.05.2017)
DOI: 10.1016/j.procir.2017.03.157
URL: http://www.sciencedirect.com/science/article/pii/S2212827117303396
BibTeX: Download
Braun T, Greiner S, Baierl U, Drummer D, Franke J:
Additive Metallisierung von im Spritzguss hergestellten Keramiken mittels Plasma-Coating-Technologie
In: PLUS - Produktion von Leiterplatten und Systemen 19 (2017), S. 985-1144
BibTeX: Download
Kästle C, Syed Khaja AH, Franke J:
Investigations on the Additive Manufacturing and Heavy Wire Bonding Capability of Selective Laser-Melted Circuit Carriers
In: Journal of Microelectronics and Electronic Packaging 14 (2017), S. 63 - 69
ISSN: 1551-4897
DOI: 10.4071/imaps.453827
BibTeX: Download
Gläßel T, Franke J:
Kontaktierung von Antrieben für die Elektromobilität
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 112 (2017), S. 322 - 326
ISSN: 0932-0482
URL: http://www.hanser-elibrary.com/doi/abs/10.3139/104.111721
BibTeX: Download
Böhm R, Javied T, Franke J:
Intelligente Versorgungssysteme für Druckluft und technische Gase
In: Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse (2017), S. 57-61
ISSN: 1434-1980
BibTeX: Download
Hein M, Stöber R, Meiler M, Schaller D, Zehle R, Fischerauer G, Bauer J, Bürner J, Franke J, Becher T, Feller M, Maul J:
Sensor solutions for an energy-efficient and user-centered heating system
In: Journal of Sensors and Sensor Systems (2017), S. 27-35
ISSN: 2194-8771
DOI: 10.5194/jsss-6-27-2017
BibTeX: Download
Russer JA, Haider M, Weigelt M, Becherer M, Kahlert S, Merz C, Schindler M, Franke J, Russer P:
A System for Wireless Inductive Power Supply of Electric Vehicles while Driving Along the Route
7th International Electric Drives Production Conference (EDPC), 2017 (Würzburg, 05.12.2017 - 06.12.2017)
DOI: 10.1109/EDPC.2017.8328158
BibTeX: Download
Böhm R, Weyrich S, Franke J:
Cyber-physical compressed air systems enable flexible generation of compressed air adapted to demand of production
7. WGP-Jahreskongress (Aachen, 05.10.2017 - 06.10.2017)
BibTeX: Download
Kästle C, Fleischmann H, Scholz M, Härter S, Franke J:
Cyber-Physical Electronics Production
In: Springer International Publishing (Hrsg.): Industrial Internet of Things, Switzerland: Springer International Publishing, 2017
ISBN: 978-3-319-42559-7
DOI: 10.1007/978-3-319-42559-7_3
BibTeX: Download
Lomakin K, Sippel M, Gold G, Rochholz P, Helmreich K, Ankenbrand M, Gräf D, Franke J:
Additive Fertigung in der Hochfrequenztechnik – Potenziale und Herausforderungen
In: PLUS - Produktion von Leiterplatten und Systemen (2017)
BibTeX: Download
Gräf D, Ischdonat N, Hedges M, Hörber J, Franke J:
Data and Power Distribution via Printed Electronics in Aerospace Applications
European Microelectronics Packaging Conference EMPC2017 (Warsaw, 10.09.2017 - 13.09.2017)
DOI: 10.23919/EMPC.2017.8346860
BibTeX: Download
Hensel A, Müller M, Kohlmann-von Platen K, Franke J:
Additive Copper Metallization of Semiconductors for Enabling a Copper Wire Bonding Process
40th International Spring Seminar on Electronics Technology (ISSE) (Sofia, 10.05.2017 - 14.05.2017)
BibTeX: Download
Mahr A, Wurm M, Bickel B, Franke J, Halder H:
Development of a control system for a universal winding machine based on virtual path planning
Electric Drives Production Conference (EDPC), 2017 7th International (Würzburg, 05.12.2017 - 06.12.2017)
DOI: 10.1109/EDPC.2017.8328141
BibTeX:
Fischer A, Kuhn T, Müller H, Drummer D, Franke J, Zimmermann A:
Effect of flow lines on the metallization of laser structured polymer parts
SPE Antec 2017 (Anaheim, 08.05.2017 - 10.05.2017)
BibTeX: Download
Donhauser T, Lohse J, Franke J, Schuderer P:
Efficient Method for Optimizing Calcium Silicate Masonry Unit Manufacturing Using Simulation-Based Optimization and DecompositionDOI: 10.4028/www.scientific.net/AMM.856.99
BibTeX: Download
Urban N, Meyer AW, Kreitlein S, Leicht F, Franke J:
Efficient near Net-Shape Production of High Energy Rare Earth Magnets by Laser Beam Melting
In: Applied Mechanics and Materials, 2017
DOI: 10.4028/www.scientific.net/AMM.871.137
BibTeX: Download
Scholz M, Kreitlein S, Franke J:
E|Flow - Decentralized Computer Architecture and Simulation Models for Sustainable and Resource Efficient Intralogistics
Green Factory Bavaria Kolloquium (Nürnberg)
DOI: 10.4028/www.scientific.net/AMM.856.117
BibTeX: Download
Scholz M, Venkataraman Ramasubramanian S, Blank A, Kreitlein S, Franke J:
E|Flow II - Infrastructural Sensor Concepts to Digitize the Workspace for Sustainable and Resource Efficient Intralogistics
GFB-Kolloquium
DOI: 10.4028/www.scientific.net/AMM.871.97
BibTeX: Download
Kreitlein S, Urban N, Gerter V, Franke J:
Crossbench and Evaluation of Additive Manufacturing Processes in Strategy of Sustainable and Energy Efficient Production
In: Applied Mechanics and Materials, 2017
DOI: 10.4028/www.scientific.net/AMM.871.145
BibTeX: Download
Koch L, Müller J, Michos G, Paulus J, Hubert M, Franke J:
Coupled Thermal and Fluid Mechanical Modeling of a High Speed Motor Spindle
In: Applied Mechanics and Materials, 2017
DOI: 10.4028/www.scientific.net/AMM.871.161
BibTeX: Download
Heisler P, Sand C, Hefner F, Süß-Wolf R, Franke J:
Concept for Automated Fuse and Relay Assembly in the Field of Cable Harness ManufacturingBibTeX:
Mayr A, Meyer AW, Gönnheimer P, Gramlich J, Reiser M, Franke J:
Concept for an integrated product and process development of electric drives using a knowledge-based system
7th International Electric Drives Production Conference (EDPC) (Würzburg, Germany, 05.12.2017 - 06.12.2017)
DOI: 10.1109/EDPC.2017.8328157
URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8328157&isnumber=8328136
BibTeX:
Baier L, Hüttel F, Haintl A, Schuderer P, Franke J:
Choosing Identification Technologies for Implementation of Traceability in order to Increase Overall Equipment Effectiveness
4. GFB Kolloquium 2017 (Augsburg, 20.09.2017 - 21.09.2017)
DOI: 10.4028/www.scientific.net/AMM.871.87
URL: https://www.scientific.net/AMM.871.87.pdf
BibTeX: Download
Niemann J, Härter S, Kästle C, Franke J:
Challenges of the Miniaturization in the Electronics Production on the example of 01005 Components
Kongress Montage Handhabung Industrieroboter (MHI)
DOI: 10.1007/978-3-662-54441-9_12
BibTeX: Download
Braun T, Greiner S, Diepgen A, Schröppel K, Drummer D, Franke J:
ADDITIVE METALLIZATION OF INJECTION MOLDED CERAMIC COMPONENTS BY A PLASMA-COATING PROCESS
SMTA Pan Pacific Microelectronics Symposium (Kauai, Hawaii, 06.02.2017 - 09.02.2017)
BibTeX: Download
Gläßel T, Seefried J, Franke J:
Challenges in the Manufacturing of Hairpin Windings and Application Opportunities of Infrared Lasers for the Contacting Process
2017 7th International Electric Drives Production Conference (EDPC) (Wuerzburg, 05.12.2017 - 06.12.2017)
DOI: 10.1109/EDPC.2017.8328150
URL: https://ieeexplore.ieee.org/document/8328150
BibTeX:
Scholz M, Serno M, Franke J, Schuderer P:
A Hybrid Transport Concept for the Material Supply of a Modular Manufacturing Environment
FAIM 2017
DOI: 10.1016/j.promfg.2017.07.275
BibTeX: Download
Paryanto P, Brossog M, Roppelt M, Franke J:
A Model-Based Approach for the Energy Monitoring of Handling Machines
3rd Green Factory Bavaria Colloquium 2016 (Nürnberg, 30.11.2016 - 01.12.2016)
BibTeX: Download
Ischdonat N, Gräf D, Gleine W, Dreyer C, Bauer M, Franke J:
Cabin Interior Components as Substrate Material for Printed Electrical Circuits
International Workshop on Aircraft System Technologies AST2017 (Hamburg, 21.02.2017 - 22.02.2017)
BibTeX: Download
Friedlein M, Spahr M, Süß-Wolf R, Franke J:
Application and development of analytic accelerated test models for the lifetime prediction of a novel contacting method
7. WGP-Jahreskongress (Aachen, 05.10.2017 - 06.10.2017)
BibTeX:
Bakakeu Ngassam R, Schäfer F, Bauer J, Michl M, Franke J:
Building Cyber-Physical Systems - A Smart BuildingUse Case
In: Houbing Song, Ravi Srinivasan, Tamim Sookoor, Sabina Jeschke (Hrsg.): Smart Cities: Foundations, Principles, and Applications, Wiley, 2017
ISBN: 978-1119226390
URL: https://www.amazon.de/Smart-Cities-Foundations-Principles-Applications/dp/1119226392
BibTeX:
Heisler P, Steinmetz P, Yoo IS, Franke J:
Automatization of the Cable-Routing-Process within the Automated Production of Wiring Systems
4rd Green Factory Bavaria Colloquium 2016
BibTeX: Download
Lorenz L, Nieweglowski K, Al-Husseini Z, Neumann N, Plettemeier D, Wolter KJ, Reitberger T, Franke J, Bock K:
Asymmetric Optical Bus Coupler for Interruption-Free Short-Range Connections on Board and Module Level
In: Journal of Lightwave Technology 35 (2017), S. 4033-4039
ISSN: 0733-8724
DOI: 10.1109/JLT.2017.2728198
BibTeX: Download
Reitelshöfer S, Landgraf M, Franke J:
Ein Werkstoff für künstliche Muskeln und weiche Sensoren
Leinfelden-Echterding: Konradin-Verlag, 2017
BibTeX: Download
Hubert M, Weigelt M, Spahr M, Franke J, Hackert J, Mehlhorn M:
Explicit finite element analysis for rotary cutting of electrical steel sheet
6th International Annual Engineering Seminar, InAES 2016
DOI: 10.1109/INAES.2016.7821940
BibTeX: Download
Seefried J, Gläßel T, Zürn M, Franke J:
Evaluation of monitoring approaches for the ultrasonic crimping process of tubular cable lugs
7th International Electric Drives Production Conference (EDPC) (Würzburg, 05.12.2017 - 06.12.2017)
DOI: 10.1109/EDPC.2017.8328168
BibTeX: Download
Hoffmann GA, Wolfer T, Zeitler JT, Franke J, Suttmann O, Overmeyer L:
Manufacturing of polymer optical waveguides using self-assembly effect on pre-conditioned 3D-thermoformed flexible substrates
SPIE (San Francisco)
DOI: 10.1117/12.2249121
BibTeX: Download
Schneider M, Urban N, Meyer AW, Franke J:
Neuartiger Ansatz zur flexiblen Fertigung verlustoptimierter Statorblechpakete
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 112 (2017), S. 225--228
ISSN: 0932-0482
DOI: 10.3139/104.111702
BibTeX: Download
Praß J, Reinelt M, Franke J, Becker S:
Numerical Evaluation of Heat Transfer from Rotating Discs Separated by Sealing Elements
In: Applied Mechanics and Materials 871 (2017), S. 252--261
ISSN: 1660-9336
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMM.871.252
URL: https://www.scientific.net/Paper/Preview/525929
BibTeX: Download
Sand C, Kawan S, Lechler T, Neher M, Schweigert D, Franke J:
Potentials for Error Detection and Quality Improvement in Assembly Lines Using FFT, Clustering and Dynamic Envelope Curve
In: Trans Tech Publications Ltd (Hrsg.): Applied Mechanics and Materials (Volume 871), 2017
DOI: 10.4028/www.scientific.net/AMM.871.52
BibTeX:
Mayr A, Meyer AW, Seefried J, Weigelt M, Lutz B, Sultani D, Hampl M, Franke J:
Potentials of machine learning in electric drives production using the example of contacting processes and selective magnet assembly
7th International Electric Drives Production Conference (EDPC) (Würzburg, Germany, 05.12.2017 - 06.12.2017)
DOI: 10.1109/EDPC.2017.8328166
URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8328166&isnumber=8328136
BibTeX:
Müller J, Michos G, Koch L, Hermann M, Hubert M, Franke J:
Process and Energy Data Acquisition on Machining Center and Individual Machine Components
In: Applied Mechanics and Materials, 2017
DOI: 10.4028/www.scientific.net/AMM.856.123
BibTeX: Download
Hensel A, Kohlmann-von Platen K, Franke J:
Investigations of Copper Wire Bonding Capability on Plasma Based Additive Copper Metallizations
Electronics Packaging Technology Conference (Singapore, 06.12.2017 - 09.12.2017)
DOI: 10.1109/EPTC.2017.8277588
BibTeX: Download
Meyer AW, Mayr A, Malygin N, Zhang Y, Franke J:
Selective magnet assembly assisted by an automated warehouse system: Algorithms, performance and industry 4.0 readyness
7th International Electric Drives Production Conference (EDPC) (Würzburg, Germany, 05.12.2017 - 06.12.2017)
DOI: 10.1109/EDPC.2017.8328160
URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8328160&isnumber=8328136
BibTeX:
Praß J, Weber J, Staub S, Bürner J, Böhm R, Braun T, Hein M, Michl M, Beck M, Franke J:
Smart Energy and Grid: Novel Approaches for the Efficient Generation, Storage, and Usage of Energy in the Smart Home and the Smart Grid Linkup: Foundations, Principles, and Applications
In: Houbing Song, Ravi Srinivasan, Tamim Sookoor and Sabina Jeschke (Hrsg.): Smart Cities: Foundations, Principles, and Applications, John Wiley & Sons, Inc., 2017
ISBN: 978-1-119-22639-0
DOI: 10.1002/9781119226444.ch20
BibTeX: Download
Scholz M, Oberschachtsiek S, Donhauser T, Franke J:
Software-in-the-loop testbed for multi-agent-systems in a discrete event simulation
IEEE ISSE 2017
DOI: 10.1109/SysEng.2017.8088320
BibTeX: Download
Müller J, Michos G, Koch L, Hubert M, Franke J:
Strength Calculation and Design Optimization of a Test Rig for Slide Ring Seals in the Scope of Rotary Manifolds
In: AMM (Applied Mechanics and Materials), Trans Tech Publications Ltd, 2017
DOI: 10.4028/www.scientific.net/AMM.856.166
BibTeX: Download
Bogner E, Löwen U, Franke J:
Systematic Consideration of Value Chains with Respect to the Timing of Individualization
27th CIRP Design Conference 2017 (Cranfield, 10.05.2017 - 12.10.2017)
DOI: 10.1016/j.procir.2017.01.015
URL: http://www.sciencedirect.com/science/article/pii/S2212827117300161
BibTeX: Download
Kühl A, Furlan S, Gutmann J, Meyer M, Franke J:
Technologies and processes for the flexible robotic assembly of electric motor stators
2017 IEEE International Electric Machines and Drives Conference (IEMDC) (Miami, FL, 21.05.2017 - 24.05.2017)
DOI: 10.1109/IEMDC.2017.8002245
BibTeX:
Kreitlein S, Scholz M, Franke J:
The Automated Evaluation of the Energy Efficiency for Machining Applications based on the Least Energy Demand
The Automated Evaluation of the Energy Efficiency for Machining Applications based on the Least Energy Demand
DOI: 10.1016/j.procir.2016.11.167
BibTeX: Download
Brandmeier MA, Brossog M, Franke J:
Semantic Meta Model for the Description of Resource and Energy Data in the Energy Data Management Cycle
In: Applied Mechanics and Materials 871 (2017), S. 69-76
ISSN: 1660-9336
DOI: 10.4028/www.scientific.net/AMM.871.69
BibTeX: Download
Kreitlein S, Urban N, Gerter V, Franke J:
Evaluation and Assessment of Additive Manufacturing Processes Based on the Least Energy Demand in Application for Sustainable Production
In: Applied Mechanics and Materials, 2017
DOI: 10.4028/www.scientific.net/AMM.871.153
BibTeX: Download
Schwarzer C, Fuchs D, Rauer M, Lang KJ, Krügelstein A, Kaloudis M, Franke J:
Investigation of the Influence of Voids on the Reliability of LED Solder Joints by Computer Tomography and Forward Voltage Measurement
EMPC 2017
BibTeX:
Bogner E, Kästle C, Beitinger G, Franke J:
Intelligent vernetzte Elektronikproduktion
In: Reinhart G (Hrsg.): Handbuch Industrie 4.0, München: Carl Hanser, 2017
ISBN: 9783446446427
BibTeX: Download
Buschhaus A, Wagner M, Franke J:
Inline calibration method for robot supported process tasks with high accuracy requirementsDOI: 10.1109/AIM.2017.8014096
BibTeX: Download
Urban N, Huber F, Franke J:
Influences of process parameters on rare earth magnets produced by laser beam melting
In: IEEE (Hrsg.): Proceedings of the 2017 7th International Electric Drives Production Conference (EDPC), 2017
DOI: 10.1109/EDPC.2017.8328149
BibTeX: Download
Kuhn T, Franke J:
Influences of Crack Initiation in Conductor Tracks on Three-Dimensional Thermoplastic SubstratesBibTeX: Download
Greiner S, Kurth K, Fix C, Braun T, Franke J, Drummer D:
Influence of Material and Processing Parameters on the Surface Roughness of Injection-Molded Ceramic Parts
In: Journal of Ceramic Science and Technology 08 (2017), S. 227-286
ISSN: 2190-9385
DOI: 10.4416/JCST2017-00009
BibTeX: Download
Heisler P, Hößle S, Franke J:
Increasing the Automation Degree in Wiring Harness Assembly by Extending the Standard Crimping Machines by Developed Assembly ConceptBibTeX: Download
Reitberger T, Franke J, Loosen F, Lindlein N:
Important Parameters of Printed Polymer Optical Waveguides (POWs) in Simulation and Fabrication
SPIE Photonics West 2017 (San Francisco)
DOI: 10.1117/12.2252520
BibTeX: Download
Baier L, Donhauser T, Schuderer P, Franke J:
Heuristical Solution for Scheduling Single Stage Parallel Machines Production of Calcium Silicate Masonry Units with Sequence-Dependent Changeover Times to Improve Energy Efficiency
4. GFB Kolloquium 2017 (Augsburg, 20.09.2017 - 21.09.2017)
DOI: 10.4028/www.scientific.net/AMM.871.208
URL: https://www.scientific.net/AMM.871.208.pdf
BibTeX: Download
Stenzel P, Franke J, Piepenbreier B, Endisch C:
Gro{ß}serientaugliche Nadelwickeltechnik für verteilte Wicklungen im Anwendungsfall der E-Traktionsantriebe: Der Technischen Fakultät der Friedrich-Alexander-Universität Erlangen-Nürnberg zur Erlangung des Doktorgrades Dr.-Ingenieur
Abschlussarbeit 2017
BibTeX: Download
Meyer AW, Abersfelder S, Urban N, Schneider M, Franke J:
Fertigungsbegleitende Qualitätskontrolle in der Elektromotorenfertigung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 112 (2017), S. 200--203
ISSN: 0932-0482
DOI: 10.3139/104.111694
BibTeX: Download
Syed Khaja AH, Perinan Freire A, Kästle C, Franke J:
Feasibility Investigations on Selective Laser Melting for the Development of Microchannel Cooling in Power Electronics
Electronic Components and Technology Conference (Lake Buena Vista, 30.05.2017 - 02.06.2017)
BibTeX: Download
Friedlein M, Spahr M, Süß-Wolf R, Franke J:
Failure dependent progression of contact resistance in thermal-shock testing of spring-clip contacts
2017 IEEE Holm Conference on Electrical Contacts (Denver, CO, 10.09.2017 - 13.09.2017)
DOI: 10.1109/HOLM.2017.8088081
BibTeX: Download
Buschhaus A, Wagner M, Franke J, Reitelshöfer S, Heß P:
Accuracy Analysis and Improvement for Cooperative Industrial RobotsDOI: 10.5220/0006396805390546
BibTeX: Download
Bogner E, Löwen U, Franke J:
Evaluierung der Rolle ungeplanter Ereignisse innerhalb verschiedener Produktionsstrategien
13. Symposium für Vorausschau und Technologieplanung (Berlin, 23.11.2017 - 24.11.2017)
BibTeX: Download
Praß J, Franke J, Becker S:
Investigation of drag reduction due to dimpled surfaces in narrow channels by means of flow simulations
In: Applied Mechanics and Materials 871 (2017), S. 244--251
ISSN: 1660-9336
DOI: 10.4028/www.scientific.net/AMM.871.244
URL: https://www.scientific.net/Paper/Preview/525925
BibTeX: Download
Kreitlein S, Spahr M, Utz M, Franke J:
The Least Energy Demand Method as unique tool to evaluate and rate the energy efficiency of the electric drives production
6th International Electric Drives Production Conference, EDPC 2016
DOI: 10.1109/EDPC.2016.7851345
BibTeX: Download

2016

Böhm R, Paulsburg M, Franke J:
Superordinate Control Structure for Hybrid Compensation Systems
E|Home-Symposium - Multidisciplinary Smart Home Symposium on Energy Efficient, Self-Determined and Intelligent Living (Nuremberg, 30.11.2016 - 01.12.2016)
DOI: 10.4028/www.scientific.net/AEF.19.65
BibTeX: Download
Bornschlegl M, Bregulla M, Franke J:
Methods-Energy Measurement – An approach for sustainable energy planning of manufacturing technologies
In: Journal of Cleaner Production (2016), S. 644-656
ISSN: 0959-6526
DOI: 10.1016/j.jclepro.2016.06.059
BibTeX: Download
Brandmeier MA, Krinner A, Franke J:
Investments in the Optimization of Energy Efficiency - A Comparative Study
In: Applied Mechanics and Materials 856 (2016), S. 3-10
ISSN: 1660-9336
DOI: 10.4028/www.scientific.net/AMM.856.3
BibTeX: Download
Bauer J, Kettschau AK, Brücher BA, Bodendorf F, Skibbe A, Rashid R, Franke J:
Development of an Intelligent System to Strengthen Cognitive and Motor Skills in the Home Environment
In: Advanced Engineering Forum 19 (2016)
ISSN: 2234-9898
DOI: 10.4028/www.scientific.net/AEF.19.141
BibTeX: Download
Staub S, Bauer J, Müller D, Franke J, Karl J:
CO2-Neutral Generation of Heat and Power in Smart Homes by Organic Rankine Cycle Powered Combined Heat and Power Micro Plants
In: Advanced Engineering Forum 19 (2016), S. 10-19
ISSN: 2234-9898
DOI: 10.4028
BibTeX: Download
Kästle C, Syed Khaja AH, Franke J:
Investigations on Wire Bonding Capability of Selective Laser Melted Structures
International Symposium on Microelectronics (IMAPS) (Pasadena, 11.10.2016 - 13.10.2016)
BibTeX: Download
Böhm R, Rehtanz C, Franke J:
Inverter-based hybrid compensation systems contributing to grid stabilization in medium voltage distribution networks with decentralized, renewable generation
In: Electrical Engineering (2016), S. 1-8
ISSN: 0948-7921
DOI: 10.1007/s00202-016-0425-y
BibTeX: Download
Hoffmann GA, Wolfer T, Reitberger T, Lorenz L, Wolter KJ, Franke J, Overmeyer L:
Combination of Flexographic and Aerosol Jet Printing for Integrated Polymer Optical Step Index Waveguides
DGaO 2016
URL: http://www.dgao-proceedings.de
BibTeX: Download
Fischer C, Lusic M, Faltus F, Hornfeck R, Franke J:
Integrating Workers’ Feedback into Continuous Information Flows: Enabling Lean Quality Assurance by Worker Information SystemsDOI: 10.4028/www.scientific.net/AMR.1140.435
BibTeX: Download
Yoo IS, Braun T, Kästle C, Spahr M, Kestel P, Wartzack S, Franke J, Bromberger J, Feige E:
Model Factory for Additive Manufacturing of Mechatronic Products: Interconnecting World-Class Technology Partnerships with Leading AM Players
6th CIRP Conference on Learning Factories (Gjøvik)
URL: https://www.mfk.uni-erlangen.de?file=pubmfk_57bc016fa8cc7
BibTeX: Download
Gläßel T, Spreng S, Spahr M, Franke J:
Innovative Kontaktierungstechnologien im Elektromaschinenbau Entwicklung, Qualifizierung und Optimierung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 111 (2016), S. 280-284
ISSN: 0932-0482
BibTeX: Download
Bauer J, Michl M, Kettschau AK, Wiebe S, Vierow V, Ge M, Franke J:
HealthRec - Empfehlungssystem zur Behandlung des metabolischen Syndroms im Smart Home
9. AAL-Kongress, Zukunft Lebensräume (Frankfurt am Main, 20.04.2016 - 21.04.2016)
BibTeX: Download
Hein M, Stöber R, Fischerauer G, Bauer J, Bürner J, Kettschau AK, Franke J, Feller M:
Heizsystem zur Schaffung eines angenehmen und belastungsarmen Raumklimas in Altbauten
9. AAL-Kongress, Zukunft Lebensräume (Frankfurt am Main, 20.04.2016 - 21.04.2016)
BibTeX: Download
Bauer J, Michl M, Blumthaler C, Wiebe S, Rashid R, Franke J:
NutriScale - Key Figures for Food Selection
53. Wissenschaftlicher Kongress der DGE (Fulda, 02.03.2016 - 03.03.2016)
URL: https://www.researchgate.net/publication/298188509_Nutriscale-version-final
BibTeX: Download
Brandmeier MA, Franke J:
Ontology-based user guidance for energy efficiency optimization measures
6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016 (Kuala Lumpur, 08.03.2016 - 10.03.2016)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85018400253&origin=inward
BibTeX: Download
Bogner E, Völklein T, Schrödel O, Franke J:
Smarter Services 2016
Fürth: SINTEC Informatik GmbH, 2016
ISBN: 978-3-0-0-052094-5
BibTeX: Download
Bornschlegl M, Müller A, Bregulla M, Mantwill F, Franke J:
Lebenszyklusbetrachtungen im Planungsprozess - Integration einer Lebenszyklusbetrachtung von Fertigungstechnologien im automobilen Karosseriebau
In: wt Werkstattstechnik - Online 106 (2016), S. 89-93
ISSN: 1436-4980
URL: http://www.werkstattstechnik.de/wt/article.php?data[article_id]=85045
BibTeX: Download
Fleischmann H, Spreng S, Kohl J, Kißkalt D, Franke J:
Distributed Condition Monitoring Systems in Electric Drives Manufacturing
2016 6th International Electric Drives Production Conference (EDPC) (Nürnberg, 30.11.2016 - 01.12.2016)
DOI: 10.1109/EDPC.2016.7851314
URL: http://ieeexplore.ieee.org/document/7851314/
BibTeX: Download
Gläßel T, Spahr M, Spreng S, Franke J:
Development, qualification and optimization of innovative contacting methods in the field of electric drives production
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 111 (2016), S. 280-284
ISSN: 0932-0482
DOI: 10.3139/104.111510
BibTeX: Download
Weber J, Riedel S, Praß J, Renz A, Becker S, Franke J:
Effect of Boundary Layer Tripping on the Aeroacoustics of Small Vertical Axis Wind Turbines
In: Advanced Engineering Forum 19 (2016), S. 3--9
ISSN: 2234-9898
DOI: 10.4028/www.scientific.net/AEF.19.3
BibTeX: Download
Fischer C, Lusic M, Faltus F, Hornfeck R, Franke J:
Enabling Live Data Controlled Manual Assembly Processes by Worker Information System and Nearfield Localization System
In: Procedia CIRP 55 (2016), S. 242 - 247
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.08.013
URL: http://www.sciencedirect.com/science/article/pii/S221282711630885X
BibTeX: Download
Bürner J, Franke J:
Elektrische Speicherheizungen als Instrument zur elektrischen Lastverschiebung
In: HLH, Heizung Lueftung/Klima Haustechnik Bd. 67 (2016), S. 32--34
ISSN: 1436-5103
BibTeX: Download
Hubert M, Franke J, Hackert J:
Elektroband rotationsschneiden
In: Draht (2016)
ISSN: 0012-5911
URL: https://www.umformtechnik.net/elektroband-rotationsschneiden_32227_de/
BibTeX: Download
Bogner E, Kästle C, Franke J:
Enhanced Organizational Ambidexterity in Electronics Manufacturing through the Automation of Production-Related Processes
6th International Conference on Industrial Engineering and Operations Management (Kuala Lumpur, 08.03.2016 - 10.03.2016)
URL: http://ieomsociety.org/ieom_2016/pdfs/471.pdf
BibTeX: Download
Brandmeier MA, Bogner E, Franke J:
FAPS – Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik
In: Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse (2016), S. 32-33
ISSN: 1434-1980
BibTeX: Download
Syed Khaja AH, Kästle C, Franke J:
Feasibility Studies on Selective Laser Melting of Copper Powders for the Development of High-temperature Circuit Carriers
Electronic Components and Technology Conference (Pasadena, 11.10.2016 - 13.10.2016)
BibTeX: Download
Spanheimer R, Franke J, Erdmann DM, Schaidhauf RM, Böhm R:
Flexibilization of Biogas Plants through Intelligent Automation Generates Earning Opportunities
E|Home-Symposium - Multidisciplinary Smart Home-Symposium on Energy Efficient, Selt Determined and Intelligent Living (Nuremberg, 30.11.2016 - 31.10.2016)
DOI: 10.4028/www.scientific.net/AEF.19.74
BibTeX: Download
Buschhaus A, Franke J, Grünsteudel H:
Geometry-Based 6D-Pose Visual Servoing System Enabling Accuracy Improvements of Industrial RobotsBibTeX: Download
Rauer M, Xu P, Reinhardt A, Kaloudis M, Franke J:
Einfluss von Poren in Lötverbindungen bei LED-AnwendungenURL: https://www.vde-verlag.de/buecher/454147/gmm-fb-84-elektronische-baugruppen-und-leiterplatten-ebl-2016.html
BibTeX: Download
Donhauser T, Rackow T, Hirschbrunn J, Schuderer P, Franke J:
Valid Methodology for Using Discrete Event Simulation to Improve the Resource Consumption for the Manufacturing of Masonry Units
48th CIRP International Conference on Manufacturing Systems, CIRP CMS 2015
DOI: 10.1016/j.procir.2015.12.016
BibTeX: Download
Schäfer F, Bakakeu Ngassam R, Kleinert B, Michl M, Fey D, Franke J:
Designing an OPC UA based Ecosystem for Smarter Homes
Advanced Engineering Forum 19 (Nürnberg)
BibTeX: Download
Hoffmann GA, Reitberger T, Franke J, Overmeyer L:
Conditioning of Surface Energy and Spray Application of Optical Waveguides for Integrated Intelligent SystemsBibTeX: Download
Zhang X, Scholz M, Paryanto P, Franke J:
Adaptive Optimal Multiple Object Tracking Based on Global Cameras for a Decentralized Autonomous Transport System
MHI Konferenz 2016
DOI: 10.4028/www.scientific.net/AMM.840.1
BibTeX:
Braun T, Greiner S, Franke J, Drummer D:
Additive Plasma Metallization of Spatial Ceramic Injection Molded Components
In: 12th International Congress Molded Interconnect Devices, 2016
BibTeX: Download
Braun T, Greiner S, Franke J, Drummer D:
Additive Plasma Metallization of Spatial Ceramic Injection Molded Components
12th International Congress Molded Interconnect Devices (Würzburg, 28.09.2016 - 29.09.2016)
In: 2016 12th International Congress Molded Interconnect Devices - Scientific Proceedings, MID 2016, Institute of Electrical and Electronics Engineers Inc., 2016

DOI: 10.1109/ICMID.2016.7738930
BibTeX: Download
Reitelshöfer S, Göttler M, Schmidt P, Treffer P, Landgraf M, Franke J:
Aerosol-Jet-Printing silicone layers and electrodes for stacked dielectric elastomer actuators in one processing device
SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring (Las Vegas, 20.03.2016)
DOI: 10.1117/12.2219226
BibTeX: Download
Ramer C, Seßner J, Lichtenegger T, Landgraf M, Franke J:
An adaptive, color based lane detection of a wearable jogging navigation system for visually impaired on less structured paths
2016 6th IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob) (Singapore)
DOI: 10.1109/BIOROB.2016.7523715
URL: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7523715&isnumber=7523448
BibTeX: Download
Hubert M, Ziegler M, Kutter S, Schneider M, Weigelt M, Franke J, Hackert J, Mehlhorn M:
Analysis of the Rotary Cutting Process of Electrical Steel on Basis of a Toroidal Core Test
Electric Drives Production Conference (EDPC), 2016 6th International (Nuremberg, Germany, 30.11.2016 - 01.12.2016)
DOI: 10.1109/EDPC.2016.7851339
BibTeX: Download
Schäfer F, Naser B, Franke J:
An Energy Ontology focusing on Demand Side Management in Smart Home
Advanced Engineering Forum 19 (Nürnberg)
BibTeX: Download
Meinel D, Faltus F, Franke J:
An Introduction of Two Different Modelica System Integration Concepts
In: Procedia CIRP 50 (2016), S. 502 - 507
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.05.051
URL: http://www.sciencedirect.com/science/article/pii/S2212827116305078
BibTeX: Download
Schäfer F, Zhang Y, Franke J:
An Ontology based Support for Smart Home PlanningBibTeX: Download
Loosen F, Backhaus C, Lindlein N, Zeitler JT, Franke J:
Design and simulation rules for printed optical waveguides with implemented scattering methods in CAD and raytracing software
117. DGaO-Jahrestagung (Hannover)
BibTeX: Download
Franke J, Zeitler JT, Reitberger T:
A novel engineering process for spatial opto-mechatronic applications
In: CIRP Annals - Manufacturing Technology, Elsivier, 2016
DOI: 10.1016/j.cirp.2016.04.091
BibTeX: Download
Bogner E, Abersfelder S, Heyder A, Franke J:
Application and Validation of an Existing Industry 4.0 Guideline for the Development of Specific Recommendations for Implementation
In: Advanced Materials Research 1140 (2016), S. 465-472
ISSN: 1022-6680
DOI: 10.4028/www.scientific.net/AMR.1140.465
BibTeX: Download
Buschhaus A, Franke J, Reitinger P:
Automated Optimization of Complex Three-dimensional Robot TrajectoriesBibTeX: Download
Mahr A, Masuch M, Franke J:
Benefits of an universal Winding Machine
Electric Drives Production Conference (EDPC) 2016 (Nürnberg, 29.11.2016 - 30.11.2016)
In: 6th International Electric Drives Production Conference (EDPC), Nürnberg: , 2016

BibTeX: Download
Saffoury R, Blank P, Seßner J, Groh B, Martindale C, Dorschky E, Franke J, Eskofier B:
Blind Path Obstacle Detector using Smartphone Camera and Line Laser Emitter
International Conference on Technology and Innovation in Sports, Health and Wellbeing (TISHW) (Vila Real, Portugal, 01.12.2016 - 03.12.2016)
DOI: 10.1109/TISHW.2016.7847770
URL: https://www.mad.tf.fau.de/files/2017/06/2016-Saffoury-BPO.pdf
BibTeX: Download
Landgraf M, Reitelshöfer S, Yoo IS, Franke J:
Challenges in gesture control of robots based on multi-degree of freedom movement recognition with dielectric elastomer sensors
5th International Conference on Electromechanically Active Polymer & Transducers & Artificial Muscles (EuroEAP) (Helsingør, 14.06.2016 - 15.06.2016)
BibTeX:
Syed Khaja AH, Klemm A, Zerna T, Franke J:
Characterization and Optimization of Sn-Cu TLPS Interconnects for High Temperature Power Electronics through In-Situ-X-Ray Investigations
66th IEEE Electronic Components and Technology Conference, ECTC 2016
DOI: 10.1109/ECTC.2016.281
BibTeX: Download
Zeitler JT, Reichle A, Franke J, Loosen F, Backhaus C, Lindlein N:
Computer-Aided Design and Simulation of Spatial Opto-Mechatronic Interconnect Devices
26th CIRP Design Conference, 2016
DOI: 10.1016/j.procir.2016.04.172
BibTeX: Download
Sand C, Meiners M, Daberkow J, Franke J:
Concept for a virtual process data linkage of assembly stations and a dynamic envelope curve for process monitoring
In: Electric Drives Production Conference (EDPC), 2016 6th International, 2016
BibTeX: Download
Spahr M, Kreitlein S, Haas R, Jaumann A, Gläßel T, Spreng S, Franke J:
Application and comparison of analytic accelerated test-models for lifetime prediction of a novel contacting methodBibTeX: Download
Bogner E, Körner N, Franke J:
Identifikation, Analyse und Klassifizierung innovativer Geschäftsmodelle der Digitalisierung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (2016), S. 368-371
ISSN: 0932-0482
BibTeX: Download
Scholz M, Kreitlein S, Lehmann C, Böhner J, Franke J, Steinhilper R:
Integrating Intralogistics into Resource Efficiency Oriented Learning Factories
6th CIRP Conference on Learning Factories, CLF 2016
DOI: 10.1016/j.procir.2016.05.067
BibTeX: Download
Scholz M, Seßner J, Blank A, Franke J:
Implementation of autonomous and semi-autonomous mobile systems to operation rooms
2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES) (Kuala Lumpur)
BibTeX: Download
Brandmeier MA, Bogner E, Brossog M, Franke J:
Product Design Improvement Through Knowledge Feedback of Cyber-physical Systems
26th CIRP Design Conference, 2016
DOI: 10.1016/j.procir.2016.05.026
BibTeX: Download
Syed Khaja AH, Perez P, Franke J:
Production and Characterization of High-temperature Substrates through Selective Laser Melting (SLM) for Power Electronics
IEEE CPMT Symposium Japan 2016 (Kyoto, Japan, 07.11.2016 - 09.11.2016)
BibTeX: Download
Reitelshöfer S, Meister S, Franke J:
Recognition and Description of Unknown Everyday Objects by Using an Image Based Meta-Search Engine for Service RobotsDOI: 10.4028/www.scientific.net/AEF.19.132
BibTeX: Download
Kühl A, Franke J, Lebender J:
Robotic-based Automatization of Handling and Contacting of the Ends of Windings for the Mounting of Electric Drives
WCECS 2016 - World Congress on Engineering and Computer Science 2016 (Berkeley, CA, 19.10.2016 - 21.10.2016)
In: Engineers IA (Hrsg.): WCECS 2016 - World Congress on Engineering and Computer Science 2016, Newswood Limited, 2016

BibTeX:
Yoo IS, Becker S, Vu TH, Franke J:
ROS-based validation and system integration of two different electromyography sensor hardware for control of mechatronic systems
In: Biomedizinische Technik. Biomedical engineering 61 (2016), S. S252
ISSN: 1862-278X
DOI: 10.1515/bmt-2016-5022
BibTeX: Download
Hubert M, Franke J:
Rotary Cutting of Electrical Steel Laminations—An Innovative Method for Manufacturing Electrical Machines
In: Electric Power Components and Systems, 2016
DOI: 10.1080/15325008.2016.1147107
BibTeX: Download
Syed Khaja AH, Franke J:
Selective Laser Melting for Additive Manufacturing of High-Temperature Ceramic Circuit Carriers
66th IEEE Electronic Components and Technology Conference, ECTC 2016
DOI: 10.1109/ECTC.2016.279
BibTeX: Download
Fleischmann H, Kohl J, Blank A, Schacht M, Fuchs J, Franke J:
Semantische Kommunikationsschnittstellen zur Zustandsüberwachung im Karosseriebau: Serviceorientierte Architekturen für die Maschinendiagnose in vernetzten Produktionssystemen
In: wt Werkstattstechnik - Online (2016), S. 699-704
ISSN: 1436-4980
BibTeX: Download
Reitberger T, Franke J, Overmeyer L, Wolfer T, Hoffmann GA:
Printing polymer optical waveguides on conditioned transparent flexible foils by using the aerosol jet technology
Printed Memory and Circuits II
DOI: 10.1117/12.2236220
BibTeX: Download
Xu P, Rauer M, Kaloudis M, Franke J:
Simulation-aided Analysis of the Influence of Voids on the Reliability of Solder-joints for LED-ApplicationsDOI: 10.1109/ESTC.2016.7764726
BibTeX: Download
Bürner J, Franke J:
SmartEco - Ein Ansatz zur Nutzung elektrischer Wärmespeicher zum Demand Side Management
Tagungsband zum 1. E|Home-Symposium 2016 (Nürnberg, 30.11.2016 - 01.12.2017)
BibTeX: Download
Hein M, Stöber R, Fischerauer G, Bürner J, Franke J, Feller M, Maul J:
Smart Heating System for Old Buildings - An Approach to the Decentralized Use of Renewable Energies
In: Advanced Engineering Forum 19 (2016), S. 20--26
ISSN: 2234-9898
DOI: 10.4028/www.scientific.net/AEF.19.20
BibTeX: Download
Bogner E, Völklein T, Schrödel O, Franke J:
Study Based Analysis on the Current Digitalization Degree in the Manufacturing Industry in Germany
49th CIRP Conference on Manufacturing Systems, 2016 (Stuttgart, 25.05.2016 - 27.05.2016)
DOI: 10.1016/j.procir.2016.11.004
BibTeX: Download
Yoo IS, Peipp M, Franke J:
Systematische Risikobewertung für eine additiv gefertigte, kosteneffiziente Handprothese
2. Transdisziplinäre Konferenz – Technische Unterstützungssysteme, die die Menschen wirklich wollen (Hamburg)
BibTeX: Download
Bogner E, Löwen U, Franke J:
Systematisierung von Wertschöpfungsketten im Hinblick auf die Produktion kundenindividueller Produkte
1. interdisziplinäre Konferenz zur Zukunft der Wertschöpfung (Hamburg, 14.12.2016 - 15.12.2016)
BibTeX: Download
Hofmann B, Bickel B, Bräuer P, Leder M, Franke J:
Theoretical benefits of powder-coating based insulation layers regarding copper fill factor in electric drives
In: 6th International Electric Drives Production Conference (EDPC), Nürnberg: , 2016
DOI: 10.1109/EDPC.2016.7851330
URL: https://ieeexplore.ieee.org/document/7851330
BibTeX:
Buschhaus A, Franke J, Krusemark S, Karlidag E:
Universal Fine Interpolation Algorithms for Accuracy Improvements of Industrial RobotsBibTeX: Download
Bürner J, Kleineidam G, Braun T, Skibbe A, Franke J:
SmartEco - An Approach Using Electric Storage Heaters for Demand Side Management
In: Advanced Engineering Forum 19 (2016), S. 27--34
ISSN: 2234-9898
DOI: 10.4028/www.scientific.net/AEF.19.27
BibTeX: Download
Loosen F, Backhaus C, Lindlein N, Zeitler JT, Franke J:
Implementation of a Scattering Method for Rough Surfaces in a Raytracing Software linked with a CAD (Computer-Aided Design) Toolbox
FiO (Frontiers in Optics) 2016 - 100th OSA Annual Meeting (Rochester)
DOI: 10.1364/FIO.2016.FW3H.2
BibTeX: Download
Sand C, Seidl M, Leinauer C, Neuner M, Meiners M, Baumann S, Franke J:
Potentials for Energy Saving and Quality Improvement of Assembly Presses Using Data Mining
In: Applied Mechanics and Materials (Volume 856), 2016
BibTeX:
Kästle C, Blank T, Sedlmair J, Weber M, Franke J:
Optimierung der Anlagen- und Prozessparameter für die zuverlässige Fertigung kupferbasierter sequentieller Chip-Verbindungen in der Leistungselektronik
8. DVS/GMM-Tagung: Elektronische Baugruppen und Leiterplatten (EBL) (Fellbach, 16.02.2016 - 17.02.2016)
BibTeX: Download
Hofmann B, Masuch M, Frey P, Franke J, Merklein M:
In-Line strategies and methods to reduce balancing efforts within rotor production for electric drives
6th International Electric Drives Production Conference (EDPC) (Nürnberg)
DOI: 10.1109/EDPC.2016.7851310
BibTeX: Download
Braun T, Bürner J, Michl M, Schaller L, Böhm R, Franke J:
Innovative Flexible Heating System by the Use of Additive Plasma Coating Technology: Heating Where Heat Is Needed by Additive Metallization of Furniture and WallsBibTeX: Download
Braun T, Weber J, Brüstle M, Wössner P, Praß J, Franke J:
Active Wind Turbine Deicing-Systems Produced via Plasma-Coating TechnologyBibTeX: Download
Reitberger T, Franke J, Hoffmann GA, Overmeyer L, Lorenz L, Wolter KJ:
Integration of polymer optical waveguides by using flexographic and aerosol jet printing
12th International Congress on Molded Interconnect Devices, MID 2016
DOI: 10.1109/ICMID.2016.7738933
BibTeX: Download
Landgraf M, Reitelshöfer S, Hofmann V, Zimber F, Yoo IS, Franke J:
Intuitive Gesture Control of Robots with a Sensor Arm Sleeve Based on Dielectric Elastomer Sensors
6th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob) (Singapur, 26.09.2016 - 29.06.2016)
BibTeX:
Syed Khaja AH, Stoll T, Franke J:
Investigations in Selective Laser Melting as Manufacturing Technology for the Production of High-temperature Mechatronic Integrated Devices
IMPACT 2016 (Taipei, Taiwan, 26.10.2016 - 28.10.2016)
BibTeX: Download
Syed Khaja AH, Walawski D, Stoll T, Franke J:
Is selective laser melting (SLM) an alternative for high-temperature mechatronic integrated devices? methodology, hurdles and prospects
12th International Congress on Molded Interconnect Devices, MID 2016
DOI: 10.1109/ICMID.2016.7738929
BibTeX: Download
Kolb T, Urban N, Huber F, Brela M, Maurer D, Akbulut B, Donocik C, Schmidt M, Franke J:
Laser Beam Melting Of NdFeB For The Production Of Rare-Earth Magnets
In: Proceedings of the 6th Electric Drives Production Conference, 2016
BibTeX: Download
Bürner J, Braun T, Gaus M, Michl M, Franke J:
Potential Analysis of the Use of Electric Storage Heaters for Demand Side Management ApplicationsBibTeX: Download
Baier L, Rackow T, Donhauser T, Pfeffer D, Schuderer P, Franke J:
Logistical Integration of Smart Homes for Automated Consumer Goods Supply Based on Smart Refrigerators
In: Advanced Engineering Forum 19 (2016), S. 107--115
ISSN: 2234-9898
DOI: 10.4028/www.scientific.net/AEF.19.107
BibTeX: Download
Kuhn T, Krügelstein A, Franke J:
Mechatronic Integrated Devices Produced by Laser Direct Structuring on Powder-Coated Aluminum SubstratesDOI: 10.1109/ISSE.2016.7563155
BibTeX: Download
Praß J, Renz A, Franke J, Weber J, Becker S:
Numerical Investigation of a Friction Ventilator for Different Geometrical Setups
In: Advanced Engineering Forum 19 (2016), S. 35--42
ISSN: 2234-9898
DOI: 10.4028/www.scientific.net/AEF.19.35
BibTeX: Download
Praß J, Franke J:
Numerische Untersuchung eines Reibungsventilators - Einfluss des Nabenverhältnisses auf den Druckaufbau
1. E|Home-Symposium (Nürnberg, 30.11.2016 - 01.12.2016)
BibTeX: Download
Bauer J, Volkhardt I, Michl M, Blumthaler C, Wiebe S, Rashid R, Franke J:
NutriScale - Key Figures for Daily Food Choices
In: Advanced Engineering Forum 19 (2016), S. 156-163
ISSN: 2234-9898
DOI: 10.4028/www.scientific.net/AEF.19.156
BibTeX: Download
Brandmeier MA, Schäfer F, Franke J:
Ontology-driven data input for optimization
49th Annual Simulation Symposium, ANSS 2016, Part of the 2016 Spring Simulation Multi-Conference, SpringSim 2016
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84977104044&origin=inward
BibTeX: Download
Scholz M, Kolb S, Kästle C, Franke J:
Operation-oriented One-piece-flow Manufacturing: Autonomous and Smart Systems as Enabler for a Full-meshed Production Network
49th CIRP Conference on Manufacturing Systems, CIRP-CMS 2016
DOI: 10.1016/j.procir.2016.11.125
BibTeX: Download
Kästle C, Blank T, Sedlmair J, Weber M, Franke J:
Optimierung der Anlagen- und Prozessparameter für die zuverlässige Auslegung kupferbasierter sequenzieller Chip-Verbindungen in der Leistungselektronik
In: DVS (Hrsg.): Jahrbuch Mikroverbindungstechnik 2016/ 2017, Düsseldorf: DVS Media, 2016 (Jahrbücher)
ISBN: 978-3-945023-80-8
BibTeX: Download
Bickel B, Mahr A, Meixner S, Bäumler M, Franke J:
Manufacturing Techniques for Improved Electric Traction Drives
26th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) (Seoul, 27.06.2016 - 30.06.2016)
BibTeX:
Wagner M, Heß P, Reitelshöfer S, Franke J:
3D Scanning of Workpieces with Cooperative Industrial Robot ArmsBibTeX: Download

2015

Bauer J, Kettschau AK, Michl M, Bürner J, Franke J:
Intelligente Wohnung
In: Weidner, Robert; Redlich, Tobias; Wulfsberg, Jens Peter; (Hrsg.): Technische Unterstützungssysteme, Berlin: Springer, 2015
ISBN: 978-3-662-48383-1
BibTeX: Download
Kästle C, Losch T, Franke J:
Evaluation of Influencing Factors on the Heavy Wire Bondability of Plasma Printed Copper Structures
Electronics Packaging and Technology Conference (EPTC) (Singapur, 02.12.2015 - 04.12.2015)
DOI: 10.1109/EPTC.2015.7412290
BibTeX: Download
Scholz M, Franke J:
Bitte ein Taxi! Autonomer Materialtransport in der Intralogistik.
In: Handling (2015), S. 52 - 53
ISSN: 0936-7365
URL: https://www.handling.de/epaper/handling1215/blaetterkatalog/index.html
BibTeX: Download
Bickel B, Mahr A, Kühl A, Franke J, Meixner S, Berendt E, Riedel A:
Implementation of the Needle Winding Technique for Diamond Coils
5th International Electric Drives Production Conference (Nuremberg, 16.09.2015 - 16.09.2015)
DOI: 10.1109/EDPC.2015.7323198
BibTeX: Download
Yoo IS, Landgraf M, Reitelshöfer S, Franke J:
Soft Robotics mit DEA: Künstliche Muskeln für Roboterkollegen
In: Handling (2015), S. 50-51
ISSN: 0936-7365
BibTeX:
Bornschlegl M, Bregulla M, Franke J:
Energieprognose mittels Methods-Energy Measurement - Berücksichtigung des Energiebedarfs in der frühen Planungsphase durch komponentenbasierte Energieplanung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 110 (2015), S. 491-494
ISSN: 0932-0482
URL: http://www.zwf-online.de/ZW111349
BibTeX: Download
Kästle C, Hörber J, Öchsner F, Franke J:
Prospects of wire bonding as an approach for contacting additive manufactured Aerosol Jet printed structures
European Microelectronics Packaging Conference (EMPC) (Friedrichshafen, 14.09.2015 - 16.09.2015)
BibTeX: Download
Paryanto P, Brossog M, Bornschlegl M, Franke J:
Reducing energy consumption of industrial robots in manufacturing systems
In: International Journal of Advanced Manufacturing Technology 78 (2015), S. 1315-1328
ISSN: 0268-3768
DOI: 10.1007/s00170-014-6737-z
BibTeX: Download
Zeitler JT, Fischer C, Franke J:
Ansatz zur integrativen Entwicklung räumlicher optomechatronischer Baugruppen
Wissenschafts- und Industrieforum Intelligente Technische Systeme - 10. Workshop Entwurf mechatronischer Systeme (Paderborn, 23.04.2015 - 24.04.2015)
BibTeX: Download
Landgraf M, Zorell U, Wetzel T, Reitelshöfer S, Yoo IS, Franke J:
Dielectric elastomer actuators as self-sensing devices: A new method of superimposing actuating and sensing signals
Electroactive Polymer Actuators and Devices (EAPAD) 2015 (San Diego, 08.03.2015)
DOI: 10.1117/12.2083572
BibTeX: Download
Wagner M, Heß P, Reitelshöfer S, Franke J:
Data fusion between a 2D laser profile sensor and a camera
12th International Conference on Informatics in Control, Automation and Robotics, July 21-23, 2015, in Colmar, Alsace, France
BibTeX: Download
Scholz M, Hußnätter M, Kreitlein S, Franke J:
E|Flow - From Production Line Concept to a Physically and Digitally Full-Meshed Production Network
GFB Kolloquium (Nürnberg)
DOI: 10.4028/www.scientific.net/AMM.805.94
BibTeX: Download
Schramm R, Reitberger T, Franke J:
Electrical and mechanical investigations on copper circuit paths coated on fiber-reinforced plastics by atmospheric plasma technology
In: Journal of Microelectronics and Electronic Packaging 12 (2015), S. 61-66
ISSN: 1551-4897
DOI: 10.4071/imaps.445
BibTeX: Download
Reitelshöfer S, Landgraf M, Yoo IS, Franke J:
Continuous aerosol-jet-printing of silicone layers for dielectric elastomer actuators
5th International Conference on Electromechanically Active Polymer (EAP) Transducers & Artificial Muscles (EuroEAP) (Tallinn, 09.06.2015 - 10.06.2015)
BibTeX:
Loosen F, Backhaus C, Lindlein N, Zeitler JT, Franke J:
Concepts for the design and optimization process of printed polymer-based optical waveguides (scattering processes)
4th doctoral students conference on optics (DoKDoK) (Eisenach)
BibTeX: Download
Hörlin S, Dietz A, Hubert M, Franke J:
Energetic Simulation of Complex Mechatronic Drive Systems over Complete Drive Cycles
In: Applied Mechanics and Materials, 2015
DOI: 10.4028/www.scientific.net/AMM.805.241
BibTeX: Download
Syed Khaja AH, Franke J:
Characterization and reliability of paste based thin-film Sn-Cu TLPS joints for high temperature power electronics
2015 International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, PCIM Europe 2015
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84997079023&origin=inward
BibTeX: Download
Bauer J, Kettschau AK, Blank A, Wiebe S, Franke J:
Die elektronische Gesundheitsakte in der intelligenten Wohnung
8. Deutscher AAL-Kongress (Frankfurt am Main, 29.04.2015 - 30.04.2015)
BibTeX: Download
Michl M, Schäfer F, Bauer J, Franke J:
Von der Industrie 4.0 zur Wohnung 4.0 -- Einsatzpotenziale verteilter Systemansätze im industriellen und privaten Umfeld
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 110 (2015), S. 63--67
ISSN: 0932-0482
BibTeX: Download
Bogner E, Götz J, Fleischmann H, Franke J:
Automatisierung von Overheadprozessen: Erschließung von Effizienzpotentialen für Industrie 4.0
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (2015), S. 470-474
ISSN: 0932-0482
BibTeX: Download
Müller J, Illek R, Michos G, Faust K, Hubert M, Franke J:
A System Embracing Observation of Different PTFE-Compounds in the Sealing Application of Rotary Manifolds
In: Applied Mechanics and Materials, 2015
DOI: 10.4028/www.scientific.net/AMM.805.123
BibTeX: Download
Yoo IS, Reitelshöfer S, Landgraf M, Franke J:
Artificial muscles, made of dielectric elastomer actuators - A promising solution for inherently compliant future robots
In: Verl A, Albu-Schäffer A, Brock O, Raatz A (Hrsg.): Soft Robotics, Berlin and Heidelberg: Springer Verlag GmbH, 2015
ISBN: 978-3-662-44505-1
DOI: 10.1007/978-3-662-44506-8_4
BibTeX: Download
Bogner E, Abersfelder S, Franke J:
Antriebstechnik im Zeitalter von Industrie 4.0 - wo stehen wir heute schon in der Forschung und Entwicklung?
In: Antriebstechnik (2015), S. 130
ISSN: 0722-8546
BibTeX: Download
Syed Khaja AH, Hörber J, Gruber C, Franke J:
A novel approach for thin-film Ag-sintering process through Aerosol Jet Printing in power electronics
20th European Microelectronics and Packaging Conference and Exhibition, EMPC 2015
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84978197308&origin=inward
BibTeX: Download
Esfandyari A, Landskrone T, Syed Khaja AH, Franke J:
An exergy-based analysis of temperature profiles for an over-pressure reflow oven technology
ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015
DOI: 10.1115/IMECE201551888
BibTeX: Download
Reitelshöfer S, Landgraf M, Gräf D, Bugert L, Franke J:
A new production process for soft actuators and sensors based on dielectric elastomers intended for safe human robot interaction
2015 IEEE/SICE International Symposium on System Integration (Nagoya, 11.12.2015 - 13.12.2015)
DOI: 10.1109/SII.2015.7404953
BibTeX: Download
Bornschlegl M, Kreitlein S, Bregulla M, Franke J:
A Method for Forecasting the Running Costs of Manufacturing Technologies in Automotive Production during the Early Planning Phase
In: Procedia CIRP 26 (2015), S. 412-417
ISSN: 2212-8271
DOI: 10.1016/j.procir.2014.07.103
BibTeX: Download
Reitberger T, Hörber J, Schramm R, Sennefelder S, Franke J:
Aerosol Jet® printing of optical waveguides
38th International Spring Seminar on Electronics Technology, ISSE 2015
DOI: 10.1109/ISSE.2015.7247951
BibTeX: Download
Paryanto P, Hetzner A, Brossog M, Franke J:
A Dynamic Simulation Model of Industrial Robots for Energy Examination Purpose
2nd Green Factory Bavaria Colloquium 2015 (Nürnberg, 30.09.2015 - 01.10.2015)
BibTeX: Download
Syed Khaja AH, Schwarz D, Franke J:
Advanced substrate and packaging concepts for compact system integration with additive manufacturing technologies for high temperature applications
IEEE CPMT Symposium Japan 2015, ICSJ 2015
DOI: 10.1109/ICSJ.2015.7357402
BibTeX: Download
Bogner E, Bickel B, Franke J:
Bewertung neuer Fertigungskonzepte für hohe Stückzahlen in der E-Maschinenfertigung
11. Symposium für Vorausschau und Technologieplanung (SVT) (Berlin, 29.10.2015 - 30.10.2015)
BibTeX: Download
Donhauser T, Eden W, Franke J, Jung T, Schuderer P:
Entwicklung einer Methodik zur ressourcenorientierten Steuerung der Werksprozesse in der Kalksandstein-Industrie: "KS-Sim"
2015
(Forschungsbericht)
URL: https://books.google.de/books?id=XDDnjgEACAAJ
BibTeX: Download
Spahr M, Bönig J, Gläßel T, Spreng S, Ebert T, Franke J:
Explicit FEM analysis of a new contacting method for electronic devices with novel wiring harnesses
61st IEEE Holm Conference on Electrical Contacts, HOLM 2015
DOI: 10.1109/HOLM.2015.7355128
BibTeX: Download
Yoo IS, Reitelshöfer S, Franke J:
Additiv gefertigte Handprothese
In: Weidner R, Redlich T, Wulfsberg JP (Hrsg.): Technische Unterstützungssysteme, Berlin/Heidelberg: Springer Vieweg, 2015
ISBN: 978-3-662-48382-4
DOI: 10.1007/978-3-662-48383-1_5
BibTeX: Download
Buschhaus A, Blank A, Franke J:
Vector Based Closed-Loop Control Methodology for Industrial Robots
ICAR 2015 - 17th International Conference on Advanced Robotics (Istanbul, 27.07.2015 - 31.07.2015)
DOI: 10.1109/ICAR.2015.7251495
BibTeX: Download
Kreitlein S, Kupfer I, Scholz M, Franke J:
The Least Energy Demand Method as Metric to Describe the Relative Energy Efficiency of a Product based on its Manufacturing
Green Factory Bavaria Kolloquium (Nürnberg)
DOI: 10.4028/www.scientific.net/AMM.805.19
BibTeX: Download
Böhm R, Bürner J, Franke J:
Smart Factory Meets Smart Grid: Cyber-Physical Compressed Air Systems Enable Demand Side Management in Industrial EnvironmentsDOI: 10.4028/www.scientific.net/AMM.805.25
BibTeX: Download
Bürner J, Ditter A, Fey D, Franke J:
SmartEco: An Integrated Solution from Load Balancing between the Grid and Consumers to Local Energy Efficiency
8th International Conference on Utility and Cloud Computing (Limassol, 07.12.2016 - 10.12.2015)
BibTeX: Download
Bönig J, Bickel B, Spahr M, Fischer C, Franke J:
Simulation of orthocyclic windings using the linear winding technique
5th International Conference on Electric Drives Production, EDPC 2015
DOI: 10.1109/EDPC.2015.7323201
BibTeX: Download
Donhauser T, Ehrhardt J, Rackow T, Franke J, Schuderer P:
Simulation-Based Optimization of the Energy Consumption in the Hardening Process for Calcium Silicate Masonry UnitsDOI: 10.4028/www.scientific.net/AMM.805.249
BibTeX: Download
Spreng S, Kohl J, Heisler P, Franke J:
Simulation Based Evaluation of Energy Saving Potentials in the Field of Electric Drives Manufacturing
2nd Green Factory Bavaria Colloquium 2015 (Nürnberg, 30.09.2015 - 01.10.2015)
BibTeX: Download
Wagner M, Heß P, Reitelshöfer S, Franke J:
Self-calibration method for a robotic based 3D scanning system
IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA) (Luxembourg, 08.09.2015 - 11.09.2015)
DOI: 10.1109/ETFA.2015.7301508
BibTeX: Download
Hubert M, Franke J, Hackert J, Rosenow H:
Rotary cutting as an alternative method in the processing of electrical steel strip: Geometric and kinematic determination of the process setup
5th International Conference on Electric Drives Production, EDPC 2015
DOI: 10.1109/EDPC.2015.7323213
BibTeX: Download
Rackow T, Donhauser T, Hübler J, Schuderer P, Franke J:
Planung von Energieverbräuchen in der Produktion: Vorschlag und Diskussion von Methoden zur Unterstützung des Energiemanagements
In: wt Werkstattstechnik - Online (2015), S. 329-333
ISSN: 1436-4980
BibTeX: Download
Hofmann B, Spreng S, Kühl A, Franke J:
Evaluation of economic and ecologic potential of induction heating in the context of insulation systems within electric drives
IEEE Electrical Insulation Conference (Seattle, WA, 07.06.2015 - 08.06.2015)
BibTeX:
Brandmeier MA, Schäfer F, Kreitlein S, Franke J:
Ontology-based Description of Energy Optimization Potentials for Production Environments
In: Jörg Franke; Sven Kreitlein (Hrsg.): Energy Effiency in Strategy of Sustainable Production, Pfaffikon: Trans Tech Publications Ltd, 2015
BibTeX: Download
Bauer J, Kettschau AK, Besser J, Jaensch P, Bodendorf F, Zerth J, Franke J:
Konzeption eines intelligenten Systems zur Förderung der kognitiven und motorischen Fähigkeiten im häuslichen Umfeld
AAL-Kongress (Frankfurt am Main, 29.04.2015 - 30.04.2015)
BibTeX: Download
Franke J, Syed Khaja AH, Schramm R, Ochs R:
Investigations in the optimization of power electronics packaging through additive plasma technology
4th CIRP Global Web Conference, CIRPe 2015
DOI: 10.1016/j.procir.2015.08.005
BibTeX: Download
Rackow T, Donhauser T, Schuderer P, Franke J:
Integrated Energy-Controlling in Industrial Value ChainsDOI: 10.4028/www.scientific.net/AMM.805.86
BibTeX: Download
Meyer AW, Mahr A, Hofmann B, Masuch M, Franke J:
Innovative developments for automated assembly and fixation of integrated permanent magnets in rotors of synchronous machines
5th International Conference on Electric Drives Production, EDPC 2015
DOI: 10.1109/EDPC.2015.7323231
BibTeX: Download
Kühl A, Franke J:
Innovative Assembly of Stators using Ambidextrous Kinematics
WCECS 2015 - World Congress on Engineering and Computer Science 2015 (Berkeley, CA, 21.10.2015 - 23.10.2015)
In: Engineers IA (Hrsg.): WCECS 2015 - World Congress on Engineering and Computer Science 2015, Newswood Limited, 2015

BibTeX:
Syed Khaja AH, Franke J:
Influential parameters in the development of Transient Liquid Phase Soldering (TLPS) as a new interconnect system for high power lighting applications
IEEE CPMT Symposium Japan 2015, ICSJ 2015
DOI: 10.1109/ICSJ.2015.7357384
BibTeX: Download
Brandmeier MA, Rummler K, Brossog M, Franke J:
Green Energy Management Portal -- Knowledge and Project Management for Energy Efficiency Projects
2nd Green Factory Bavaria Colloquium 2015 (Nürnberg, 30.09.2015 - 01.10.2015)
BibTeX: Download
Rackow T, Javied T, Donhauser T, Martin A, Schuderer P, Franke J:
Green cockpit: Transparency on energy consumption in manufacturing companies
12th Global Conference on Sustainable Manufacturing, GCSM 2014
DOI: 10.1016/j.procir.2015.01.011
BibTeX: Download
Ramer C, Seßner J, Scholz M, Zhang X, Franke J:
Fusing Low-cost Sensor Data for Localization and Mapping of Automated Guided Vehicle Fleets in Indoor ApplicationsDOI: 10.1109/MFI.2015.7295747
BibTeX: Download
Meyer AW, Heyder A, Brela M, Urban N, Sparrer J, Franke J:
Fully automated rotor inspection apparatus with high flexibility for permanent magnet synchronous motors using an improved hall sensor line array
5th International Conference on Electric Drives Production, EDPC 2015
DOI: 10.1109/EDPC.2015.7323196
BibTeX: Download
Buschhaus A, Franke J, Apel N:
Method for Vectorial Robot Movement Determination Enabling Accuracy ImprovementsBibTeX: Download
Syed Khaja AH, Kästle C, Müller M, Franke J:
A Comprehensive Study on the Automation Potentials and Complexities of Advanced and Alternative Die-Attach Technologies for Power Electronic Applications
In: Applied Mechanics and Materials (2015), S. 320 - 327
ISSN: 1660-9336
DOI: 10.4028/www.scientific.net/AMM.794.320
BibTeX: Download

2014

Bornschlegl M, Paryanto P, Spahr M, Kreitlein S, Bregulla M, Franke J:
Energy Planning of Manufacturing Systems with Methods-Energy Measurement (MEM) and Multi-Domain Simulation Approach
In: Applied Mechanics and Materials 655 (2014), S. 53-59
ISSN: 1660-9336
DOI: 10.4028/www.scientific.net/AMM.655.53
BibTeX: Download
Brossog M, Hartmann C, Kohl J, Merhof J, Reichenbach M, Fey D, Franke J:
Prozessflexible Steuerung von Industrierobotern
In: wt Werkstattstechnik - Online 104 (2014), S. 535-540
ISSN: 1436-4980
URL: http://www.werkstattstechnik.de/
BibTeX: Download
Zeitler JT, Fischer C, Goetze B, Franke J:
Novel Approach for Implementation of 3D-MID Compatible Functionalities into Computer-Aided Design Tools
11th International Congress Molded Interconnect Devices (MID 2014) (Fürth, 24.09.2014 - 25.09.2014)
BibTeX: Download
Schlögl T, Leyendecker S, Reitelshöfer S, Landgraf M, Yoo IS, Franke J:
On modelling and simulation of dielectric elastomer actuators via electrostatic-elastodynamic coupling
Proceedings of the 3rd Joint International Conference on Multibody System Dynamics IMSD (Busan, 30.06.2014 - 03.07.2014)
BibTeX: Download
Zeitler JT, Fischer C, Goetze B, Franke J:
Integration of Semi-Automated Routing Algorithms for Spatial Circuit Carriers into Computer-Aided Design Tools
Electronics Circuit World Convention 13 (ECWC 13) (Nuremberg, 06.05.2014 - 07.05.2014)
BibTeX: Download
Kästle C, Franke J:
Comparative Analysis of the Process Window of Aluminum and Copper Wire Bonding for Power Electronics Applications
International Conference on Electronics Packaging (ICEP) (Toyama, 23.04.2014 - 25.04.2014)
DOI: 10.1109/ICEP.2014.6826706
BibTeX: Download
Paryanto P, Brossog M, Merhof J, Franke J:
Mechatronic Behavior Analysis of a Customized Manufacturing Cell
7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014) (Aalborg, Dänemark, 04.02.2014 - 07.02.2014)
DOI: 10.1007/978-3-319-04271-8
BibTeX: Download
Bauer J, Kettschau AK, Franke J:
Optimierung der Datenvisualisierung von AAL-Serviceplattformen durch Usability-Tests
AAL-Kongress (Berlin, 21.01.2014 - 22.01.2014)
URL: https://www.vde-verlag.de/proceedings-de/453574108.html
BibTeX: Download
Esfandyari A, Syed Khaja AH, Javied T, Franke J:
Energy efficiency investigation on high-pressure convection reflow soldering in electronics production
Trans Tech Publications Ltd, 2014
ISBN: 9783038352839
DOI: 10.4028/www.scientific.net/AMM.655.95
BibTeX: Download
Paryanto P, Brossog M, Kohl J, Merhof J, Spreng S, Franke J:
Energy consumption and dynamic behavior analysis of a six-axis industrial robot in an assembly system
5th CIRP Conference on Assembly Technologies and Systems CATS 2014 (Dresden, 13.11.2014 - 14.11.2014)
DOI: 10.1016/j.procir.2014.10.091
BibTeX: Download
Schramm R, Reitberger T, Franke J:
Electrical Characterization of Fibre-Reinforced Plastics by Atmospheric Plasma TechnologyBibTeX: Download
Ramer C, Franke J:
Work space surveillance of a robot assistance system using a ToF camera
In: Advanced Materials Research 907 (2014), S. 291-298
ISSN: 1022-6680
DOI: 10.4028/www.scientific.net/AMR.907.291
BibTeX: Download
Kreitlein S, Meyer AW, Franke J:
EBenchmark-A pioneering method for process planning and sustainable manufacturing strategies for processes in the electric drives production
2014 4th International Electric Drives Production Conference, EDPC 2014
DOI: 10.1109/EDPC.2014.6984425
BibTeX: Download
Reitelshöfer S, Landgraf M, Yoo IS, Hörber J, Ramer C, Ziegler C, Franke J:
Dielectric elastomer actuators - On the way to new actuation-systems driving future assistive, compliant and safe robots and prostheses
5th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob 2014) (Sao Paulo, 12.08.2014 - 15.08.2014)
DOI: 10.1109/BIOROB.2014.6913877
BibTeX: Download
Bauer J, Kettschau AK, Michl M, Bürner J, Franke J:
Die intelligente Wohnung als Baustein im Internet der Dinge: Potenzialanalyse und Konzept einer domänenübergreifenden Lösung
Technische Unterstützungssysteme, die die Menschen wirklich wollen (Hamburg, 15.12.2014 - 16.12.2014)
BibTeX: Download
Landgraf M, Reitelshöfer S, Yoo IS, Franke J:
Development of a lightweight hardware for controlling multiple dielectric elastomer actuators
4th International Conference on Electromechanically Active Polymer (EAP) Transducers & Artificial Muscles - EuroEAP (Linköping, 10.06.2014 - 11.06.2014)
BibTeX: Download
Bornschlegl M, Spreng S, Kreitlein S, Bregulla M, Franke J:
Determination of the Prospective Energy Consumption of Manufacturing Technologies with Methods-Energy Measurement (MEM)
4th International Conference and Exhibition in Electric Drives Production E|DPC 2014 (Nürnberg, 30.09.2014 - 01.10.2014)
DOI: 10.1109/EDPC.2014.6984427
BibTeX: Download
Hubert M, Franke J, Hackert J:
Continuous rotational cutting of laminations for electric drives: Cutting process and tool setups for rotational cutting of laminations
2014 4th International Electric Drives Production Conference, EDPC 2014
DOI: 10.1109/EDPC.2014.6984390
BibTeX: Download
Reitelshöfer S, Ramer C, Gräf D, Matern F, Franke J:
Combining a collaborative robot and a lightweight Jamming-Gripper to realize an intuitively to use and flexible co-worker
2014 IEEE/SICE International Symposium on System Integration (Tokyo, 13.12.2014 - 15.12.2014)
DOI: 10.1109/SII.2014.7028001
BibTeX: Download
Meinel D, Paryanto P, Franke J:
Chances of the Application of Multi-Domain Simulation Tools in the Field of Train System Engineering
24th FAIM Conference (San Antonio, TX, 20.05.2014 - 23.05.2014)
DOI: 10.14809/faim.2014.0893
BibTeX: Download
Bönig J, Bickel B, Spahr M, Fischer C, Franke J:
Explicit dynamics process simulation of linear coil winding for electric drives production
2014 4th International Electric Drives Production Conference, EDPC 2014
DOI: 10.1109/EDPC.2014.6984403
BibTeX: Download
Buschhaus A, Blank A, Ziegler C, Franke J:
Highly Efficient Control System Enabling Robot Accuracy Improvement
5th CATS 2014 - CIRP Conference on Assembly Technologies and Systems (Dresden, 13.11.2014 - 14.11.2014)
DOI: 10.1016/j.procir.2014.03.200
BibTeX: Download
Syed Khaja AH, Franke J:
Investigations on advanced soldering mechanisms for transient liquid phase soldering (TLPS) in power electronics
5th Electronics System-Integration Technology Conference, ESTC 2014
DOI: 10.1109/ESTC.2014.6962773
BibTeX: Download
Franke J:
Artificial muscles, made of dielectric elastomer actuators: A promising solution for inherently compliant future robots
1st International Symposium on Soft Robotics in Germany (Stuttgart, 23.06.2014 - 24.06.2014)
BibTeX: Download
Yoo IS, Hawelka F, Reitelshöfer S, Franke J:
Kostenminimierte, additiv gefertigte Handprothese für den Einsatz in Entwicklungsländern
Erste Transdisziplinäre Konferenz – Technische Unterstützungssysteme, die die Menschen wirklich wollen (Hamburg)
BibTeX: Download
Yoo IS, Reitelshöfer S, Landgraf M, Franke J:
Künstliche Muskeln auf Basis von dielektrischen Elastomeraktoren (DEA)BibTeX: Download
Yoo IS, Landgraf M, Ramer C, Reitelshöfer S, Ziegler C, Franke J:
My new colleague has artificial muscles: a DEA based approach for inherently compliant robotic systems
In: Production Engineering 8 (2014), S. 711-717
ISSN: 0944-6524
DOI: 10.1007/s11740-014-0564-9
BibTeX: Download
Fischer A, Müller H, Kuhn T, Drummer D, Kück H, Franke J:
Reliability of LDS Conductor Paths - Influencing Factors and Characterization Methods
Molded Interconnected Devices (Fürth, 24.09.2014)
BibTeX: Download
Kühl A, Franke J:
Robot-Based Assembly of Cover-Plates
EMCW Expo 2014 (Milwaukee, WI, 14.05.2014 - 15.05.2014)
BibTeX:
Kühl A, Höft A, Franke J:
Robot-Based Assembly of Stators – Methods and Tools to Assembly Windings and Coverplates Robotergestützte Montage von Elektromotorstatoren: Methoden und Werkzeuge zur Montage von Wicklungen und Deckschiebern
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 109 (2014), S. 310-313
ISSN: 0932-0482
DOI: 10.3139/104.111145
BibTeX:
Leutert F, Ramer C, Pirkl G, Bahle G, Poxrucker A, Dresselhaus M, Ziegler C, Schilling K, Franke J, Lukowicz P:
Roboterassistenz in der Behindertenwerkstatt: Intuitiv bedienbare, sichere und flexible Zusammenarbeit mit Industrierobotern
In: wt Werkstattstechnik - Online 104 (2014), S. 567-572
ISSN: 1436-4980
BibTeX: Download
Ramer C, Ziegler C, Reitelshöfer S, Franke J:
Sensor-guided jogging for visually impaired
5th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob 2014) (Sao Paulo, 12.08.2014 - 15.08.2014)
DOI: 10.1109/BIOROB.2014.6913821
BibTeX: Download
Bönig J, Bickel B, Ebenhöch M, Spahr M, Fischer C, Franke J:
Structural mechanics process simulation of linear coil winding
Trans Tech Publications Ltd, 2014
ISBN: 9783038352457
DOI: 10.4028/www.scientific.net/AMR.1018.47
BibTeX: Download
Kuhn T, Franke J:
Test Methods and Influencing Factors for the Adhesion Strength Measurement of Metallized Structures on Thermoplastic SubstratesDOI: 10.1109/EPTC.2014.7028332
BibTeX: Download
Franke J, Albrecht T, Lamprecht E, Hubert M, Schneider M:
The development and validation of a segmented rotor design for electric motors in hybrid vehicle applications
2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2014 (Ischia)
DOI: 10.1109/SPEEDAM.2014.6871976
BibTeX: Download
Buschhaus A, Franke J:
Usage of Industrial Robots as Flexible Handling Devices Supporting the Process of Three Dimensional Conductive Pattern GenerationBibTeX: Download
Goth C, Kuhn T, Gion G, Franke J:
Hot Pin Pull Method - New Test Procedure for the Adhesion Measurement for 3D-MIDDOI: 10.4028/www.scientific.net/AMR.1038.115
BibTeX: Download
Franke J, Spahr M, Kuhn T, Hörber J:
Additive Manufacturing Technologies for Functionalized Mechatronic Integrated DevicesBibTeX: Download

2013

Drechsel M, Bornschlegl M, Spreng S, Bregulla M, Franke J:
A New Approach to Integrate Value Stream Analysis into a Continuous Energy Efficiency Improvement Process
39th annual conference on IEEE Industrial Electronics Society (Wien, 10.11.2013 - 13.11.2013)
DOI: 10.1109/IECON.2013.6700382
BibTeX: Download
Bornschlegl M, Drechsel M, Kreitlein S, Bregulla M, Franke J:
A new Approach to increasing Energy Efficiency by utilizing Cyber-Physical Energy Systems
11th Workshop on Intelligent Solutions in Embedded Systems (WISES) 2013 (Pilsen, 10.09.2013 - 11.09.2013)
BibTeX: Download
Landgraf M, Reitelshöfer S, Franke J:
Herstellungsverfahren gestapelter dielektrischer Elastomeraktoren und Vorbereitung für den Einsatz in mobilen Kinematiken
Augsburg: Cluster Mechatronik, 2013
BibTeX: Download
Reitelshöfer S, Landgraf M, Schlögl T, Franke J, Leyendecker S:
Qualifying dielectric elastomer actuators for usage in complex and compliant robot kinematics
EuroEAP (Dübendorf, 25.06.2013 - 26.06.2013)
BibTeX: Download
Kästle C, Syed Khaja AH, Reinhardt A, Franke J:
Investigations on Ultrasonic Copper Wire Wedge Bonding for Power Electronics
International Spring Seminar on Electronics Technology (ISSE) (Alba Iulia, 08.05.2013 - 12.05.2013)
DOI: 10.1109/ISSE.2013.6648219
BibTeX: Download
Bönig J, Fischer C, Brossog M, Bittner M, Fuchs M, Weckend H, Franke J:
Virtual validation of the manual assembly of a power electronic unit via motion capturing connected with a simulation tool using a human model
23rd CIRP Design Conference (Bochum, 11.03.2013 - 13.03.2013)
DOI: 10.1007/978-3-642-30817-8_45
BibTeX: Download
Landgraf M, Reitelshöfer S, Franke J:
Mutter Natur als Vorbild: Bionische Lösungen treiben die Automatisierung an
Vogel Business Media, 2013
BibTeX: Download
Reitelshöfer S, Landgraf M, Franke J:
Weiterentwicklung dielektrischer Elastomeraktoren zu Antriebselementen nachgiebiger Robotersysteme
Internationales Forum Mechatronik 2013 (Winterthur, 30.10.2013 - 31.10.2013)
BibTeX: Download
Landgraf M, Hedges M, Reitelshöfer S, Franke J:
Aerosol Jet Printing and Lightweight Power Electronics for Dielectric Elastomer Actuators
3rd International Electric Drives Production Conference (EDPC) (Nürnberg, 29.10.2013 - 30.10.2013)
DOI: 10.1109/EDPC.2013.6689733
BibTeX:
Ramer C, Reitelshöfer S, Franke J:
A robot motion planner for 6-DOF industrial robots based on the cell decomposition of the workspace
44th International Symposium on Robotics (ISR 2013) (Seoul, 24.10.2013 - 26.10.2013)
DOI: 10.1109/ISR.2013.6695611
BibTeX: Download
Joseph E, Tremel J, Hofmann B, Meyer AW, Franke J, Eschrich S:
Automated magnet assembly for large PM synchronous machines with integrated permanent magnets
2013 3rd International Electric Drives Production Conference, EDPC 2013 (Nuremberg)
DOI: 10.1109/EDPC.2013.6689727
BibTeX: Download
Ramer C, Reitelshöfer S, Franke J:
Automatisierte Pfadgenerierung und Kollisionsüberwachung für Sechsachs-Industrieroboter durch 3D-kameragestützte Umgebungserfassung
Kongress Automation (Baden-Baden, 25.06.2013 - 26.06.2013)
BibTeX: Download
Bornschlegl M, Drechsel M, Kreitlein S, Franke J:
Holistic Approach to Reducing CO2 Emissions along the Energy-Chain (E-Chain)
5th International Conference (ICSAT) 2013 (Ingolstadt, 25.09.2013 - 27.09.2013)
DOI: 10.1007/978-3-319-01884-3_23
BibTeX: Download
Buschhaus A, Franke J:
Industrial Robots Accuracy Optimization in the Area of Structuring and Metallization of Three Dimensional Molded Interconnect DevicesBibTeX: Download
Ramer C, Franke J:
Kollisionsfreie Bewegungsgenerierung für ein Industrieroboter-Assistenzsystem auf Basis von 3D-Kameradaten
Internationales Forum Mechatronik (Winterthur, 30.10.2013 - 31.10.2013)
BibTeX: Download
Götz J, Brossog M, Franke J:
Motivation and Approach to Establish a Comprehensive Community in Project Engineering
19th ISPE International Conference on Concurrent Engineering – CE2012 (Trier, 03.09.2012 - 07.09.2012)
In: Stjepandić J, Rock G, Bil C (Hrsg.): Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment, London: Springer Verlag GmbH, 2013

DOI: 10.1007/978-1-4471-4426-7_34
BibTeX: Download
Syed Khaja AH, Kästle C, Reinhardt A, Franke J:
Optimized thin-film diffusion soldering for power-electronics production
2013 36th International Spring Seminar on Electronics Technology, ISSE 2013 (Alba Iulia, Romania)
DOI: 10.1109/ISSE.2013.6648206
BibTeX: Download
Reitelshöfer S, Landgraf M, Franke J, Leyendecker S:
Qualification of dielectric elastomer actuators as artificial muscles for highly dynamical N-DOF robot kinematics
6th International Symposium on Adaptive Motion of Animals and Machines (AMAM) (Darmstadt, 11.04.2013 - 14.04.2013)
BibTeX: Download
Reitelshöfer S, Landgraf M, Schlögl T, Franke J, Leyendecker S:
Qualifying dielectric elastomer actuators for usage in complex and compliant robot kinematics
3rd international conference on Electromechanically Active Polymer (EAP) transducers & artificial muscles (EuroEAP) (Dübendorf, 25.06.2013 - 26.06.2013)
BibTeX:
Syed Khaja AH, Kästle C, Franke J:
Reliable packaging technologies for power electronics: Diffusion soldering and heavy copper wire bonding
2013 3rd International Electric Drives Production Conference, EDPC 2013 (Nuremberg)
DOI: 10.1109/EDPC.2013.6689763
BibTeX: Download
Kühl A, Franke J:
Robot-based assembly of stators
2013 3rd International Electric Drives Production Conference, EDPC 2013 (Nuremberg, 29.10.2013 - 30.10.2013)
DOI: 10.1109/EDPC.2013.6689754
BibTeX:
Kühl A, Günther S, Franke J:
Robot-based assembly of stator-windings
Electrical Manufacturing and Coil Winding Expo 2010-2013 (Milwaukee, WI, 08.05.2013 - 08.05.2013)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84894208287&origin=inward
BibTeX:
Kühl A, Franke J:
Robot-based assembly of stator-windings Roboterbasierte Wicklungsmontage: Flexible Statormontage unter Anwendung ambidexterer Kinematiken
In: wt Werkstattstechnik - Online 103 (2013), S. 649-655
ISSN: 1436-4980
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85026887941&origin=inward
BibTeX:
Albrecht T, Hubert M, Franke J, König W:
Segmentierte Rotoren in leistungsstarken Hybridantrieben
In: Antriebstechnik 52 (2013), S. 30 - 34
ISSN: 0722-8546
BibTeX: Download
Bönig J, Spahr M, Fischer C, Franke J:
Structural mechanic finite element analysis of the bend and torsion behavior of high-voltage cablesDOI: 10.1109/EDPC.2013.6689756
BibTeX: Download
Landgraf M, Hedges M, Reitelshöfer S, Franke J:
Aerosol jet printing and lightweight power electronics for dielectric elastomer actuators
3rd Electric Drives Production Conference - EDPC (Nürnberg, 29.10.2013 - 30.10.2013)
DOI: 10.1109/EDPC.2013.6689733
BibTeX: Download
Buschhaus A, Franke J, Reitelshöfer S, Ziegler C, Röttenbacher M:
3D-Sensorsystem für den kollisionsfreien Betrieb flexibler StrahlentherapiegeräteBibTeX: Download

2012

Brossog M, Michl M, Franke J:
Web-based Engineering Platform for Planning and Simulation of Industrial Plants and Workcells
1st International Conference on Through-life Engineering Services (TESConf 2012) (Shrivenham, 05.11.2012 - 06.11.2012)
BibTeX: Download
Reitelshöfer S, Landgraf M, Franke J, Leyendecker S:
Qualifizierung Dielektrischer-Elastomer-Aktoren zum Einsatz als künstliche Muskeln in hochdynamischen N-DOF Roboterkinematiken
6. Bremer Bionik Kongress (Bremen, 26.10.2012 - 27.10.2012)
BibTeX: Download
Buschhaus A, Franke J:
Planning and Control of Robot-Assisted Process Cells for Structuring and Metallization of 3D-MIDBibTeX: Download
Goth C, Heinle M, Franke J, Drummer D:
Mediendichte Umhausung spritzgegossener, räumlicher elektronischer Schaltungsträger im Montagespritzguss
In: PLUS - Produktion von Leiterplatten und Systemen (2012), S. 376-385
BibTeX: Download
Franke J, Schmidt M, Hubert M, Risch F, Tremel J, Hofmann B:
Laserschneiden in der Elektroblechfertigung
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 107 (2012), S. 642-646
ISSN: 0932-0482
BibTeX: Download
Franke J, Maier T, Schäfer F, Zäh M:
Experimental Evaluation of the Thermal Machine Tool Behavior for Model Updating.
In: International Journal of Automation Technology (2012), S. 125-136
ISSN: 1881-7629
BibTeX: Download
Heinle M, Goth C, Drummer D, Franke J:
Assembly Molding for Resistant Media Tight Molded Interconnect Devices
15th Int. Conference Polymeric Materials (Halle)
BibTeX: Download

2011

Hörber J, Ranft F, Müller M, Franke J, Drummer D:
Wärmeverteilung in elektronischen Baugruppen optimieren
In: Elektronikpraxis - Profiline (2011), S. 74-76
ISSN: 0341-5589
BibTeX: Download
Kühl A, Alvarez C, Franke J:
Simulation supported parameterization of reflow soldering processes Simulationsünterstutzte Parametrierung von Reflowlotprozessen
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 106 (2011), S. 143-146
ISSN: 0932-0482
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-79955704139&origin=inward
BibTeX:
Risch F, Berndt R, Franke J:
Schlanke Informationsflüsse für eine effiziente Produktion
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (2011), S. 706-710
ISSN: 0932-0482
URL: http://www.zwf-online.de/web/o_archiv.asp?o_id=20080609145437-49&ausgabe_id=21111711148-175&artikel_id=2111171115-6051&task=03&j=2011&h=10&nav_id=0
BibTeX: Download
Risch F, Kühl A, Franke J:
Production processes for wireless charging infrastructure. A large-scale market introduction of electric powered vehicles is still opposed by many barriers Produktionsprozesse für kontaktlose Ladeinfrastrukturen: Kosteneffiziente Produktion und Integration von Systemen zur kontaktlosen Übertragung von Energie in stationäre und bewegte Elektrofahrzeuge
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 106 (2011), S. 361-365
ISSN: 0932-0482
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-79959576166&origin=inward
BibTeX:
Buschhaus A, Franke J, Dobroschke A:
Optimierung der Industrieroboter-Geschicklichkeit durch Zwei-Arm-Kinematik, PMD Sensorüberwachung und aufgabenorientierte Programmierung für die flexibel automatisierte Komplettmontage von Elektromotoren
Düsseldorf, 2011
(VDI-Fachtagung Industrielle Robotik)
BibTeX: Download
Franke J, Dobroschke A, Tremel J, Kühl A:
Innovative processes and systems for the automated manufacture, assembly and test of magnetic components for electric motors
1st International Electric Drives Production Conference, EDPC-2011 (Nuremberg)
DOI: 10.1109/EDPC.2011.6085564
BibTeX:
Franke J, Tremel J, Kühl A:
Innovative developments for automated magnet handling and bonding of rare earth magnets
2011 IEEE International Symposium on Assembly and Manufacturing, ISAM 2011 (Tampere)
DOI: 10.1109/ISAM.2011.5942323
BibTeX:
Hörber J, Müller M, Franke J, Ranft F, Heinle C, Drummer D:
Assembly and Interconnection Technologies for MID based on Thermally Conductive Plastics for Heat Dissipation
34th International Spring Seminar on Electronics Technology (High Tatras Slovakia, 11.05.2011 - 15.05.2011)
In: Proceedings of the International Spring Seminar on Electronics Technology, 2011

DOI: 10.1109/ISSE.2011.6053559
BibTeX: Download

2010

Hörber J, Franke J, Ranft F, Heinle C, Drummer D:
Thermisch leitfähige Kunststoffe für eine kostengünstige Fertigung und erweiterte Funktionalität in der MID‐Technologie
In: PLUS - Produktion von Leiterplatten und Systemen (2010), S. 1-10
BibTeX: Download
Kühl A, Franke J:
Thermische Simulation von Werkzeugmaschinen zur Verbesserung der Fertigungsgenauigkeiten: Thermal simulation of machine tools for the advancement of the production accuracy
14. ASIM-Fachtagung "Simulation in Produktion und Logistik" (Karlsruhe, 07.10.2010 - 08.10.2010)
URL: http://digbib.ubka.uni-karlsruhe.de/volltexte/documents/1479461
BibTeX:

2009

Franke J, Feldmann K, Brossog M:
Mit Simulation die Produktion optimieren
18. Automation Day (Nürnberg)
URL: http://www.asqf.de
BibTeX: Download