2025

• Preitschaft A., Baader M., Wagner G., Franke J., Kühl A.:
  Insulation Thickness Measurement in Hairpin Stator Production Using a Confocal Chromatic Line Sensor
  7th Conference on Production Systems and Logistics (Lima, 18. März 2025 - 21. März 2025)
  In: Proceedings of the Conference on Production Systems and Logistics: CPSL 2025 2025
  DOI: 10.15488/18876
  BibTeX: Download

2024

• Hahn R., Wieprecht N., Ihne T., Kühl A., Franke J.:
  Approach For Optimized Dismantling Strategies And Design For Recycling Of Electric Traction Drives
  6th Conference on Production Systems and Logistics (, 9. Juli 2024 - 12. Juli 2024)
  DOI: 10.15488/17762
  BibTeX: Download
• Henrich V., Vogel A., Baader M., Franke J., Kühl A.:
  Vision-Based Pose Estimation of Superimposed Enameled Wire Ends for Robotic Handling of Powerdense Flat Wire Stators
  2024 14th International Electric Drives Production Conference (EDPC) (Regensburg, 26. November 2024 - 27. November 2024)
  In: 2024 14th International Electric Drives Production Conference (EDPC), New York City: 2024
  DOI: 10.1109/EDPC63771.2024.10932861
  BibTeX: Download
• Ihne T., Hahn R., Kühl A., Franke J.:
  Approaches For The Physical Sorting Of Soft And Hard Magnetic Material Mixtures In The Context Of Rare Earth Recycling
  Conference on Production Systems and Logistics 2024 (CPSL) (Hannover, 9. Juli 2024 - 12. Juli 2024)
  In: D Herberger, M Hübner (Hrsg.): Proceedings of the CPSL 2024. 2024
  DOI: 10.15488/17758
  BibTeX: Download
• Ihne T., Hahn R., Wieprecht N., Franke J., Kühl A.:
  Recycling Concept for Electric Vehicle Drives in the Context of Rare Earth Recovery
  2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS) (Bamberg, 5. Juni 2024 - 6. Juni 2024)
  In: 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS) 2024
  DOI: 10.1109/EPTS61482.2024.10586730
  BibTeX: Download
• Kneidl M., Kneidl M., Gömmel D., Jordan S., Masuch M., Kühl A., Franke J.:
  Thermal Analysis of the Encapsulation of Resonance Circuit Modules for the Paving Into Electric Road Systems
  2024 IEEE Wireless Power Technology Conference and Expo, WPTCE 2024 (Kyoto, 8. Mai 2024 - 11. Mai 2024)
  In: Proceedings of 2024 IEEE Wireless Power Technology Conference and Expo, WPTCE 2024 2024
  DOI: 10.1109/WPTCE59894.2024.10557363
  BibTeX: Download
• Preitschaft A., Baader M., Mayr A., Bader T., Franke J., Kühl A.:
  Design and Validation of an Inline Curvature Measurement for Flat Wire Straightening in Hairpin Stator Production
  2024 14th International Electric Drives Production Conference (EDPC) (Regensburg, 26. November 2024 - 27. November 2024)
  In: 2024 14th International Electric Drives Production Conference (EDPC) 2024
  DOI: 10.1109/EDPC63771.2024.10932837
  BibTeX: Download
• Vogel A., Baader M., Wirthmann F., Kühl A., Franke J., Kassel F.:
  Design, Construction, and Laser Welding of a Contact Ring for Automated and Reliable Coil Connection for Wound Power-Dense Flat Wired Stators
  2024 IEEE 69th Holm Conference on Electrical Contacts (HOLM) (Annapolis, 6. Oktober 2024 - 10. Oktober 2024)
  In: 2024 IEEE 69th Holm Conference on Electrical Contacts (HOLM), New York City: 2024
  DOI: 10.1109/HOLM56222.2024.10768369
  BibTeX: Download

2023

• Ihne T., Hahn R., Wieprecht N., Franke J., Kühl A.:
  Approach for Advanced Mechanical Recycling Strategies of Rare Earth Magnets Applied in Traction Drives
  Congress of the German Academic Association for Production Technology (Freudenstadt, 20. November 2023 - 23. November 2023)
  In: Thomas Bauernhansl, Alexander Verl, Mathias Liewald, Hans-Christian Möhring (Hrsg.): Production at the Leading Edge of Technology, Cham: 2023
  DOI: 10.1007/978-3-031-47394-4_45
  BibTeX: Download
• Ihne T., Wieprecht N., Hahn R., Franke J., Kühl A.:
  Analysis of induction-based thermal demagnetization of a permanent magnet rotor in the context of recycling
  13th International Electric Drives Production Conference (EDPC) (Regensburg, 29. November 2023 - 30. November 2023)
  In: 2023 13th International Electric Drives Production Conference 2023
  DOI: 10.1109/EDPC60603.2023.10372167
  BibTeX: Download
• Kneidl M., Fuß T., Weigelt M., Masuch M., Kühl A., Franke J.:
  Analysis of Production Influences on the Transmission Efficiency of Wireless Power Transfer Systems
  2023 IEEE Wireless Power Technology Conference and Expo, WPTCE 2023 (San Diego, CA, USA, 4. Juni 2023 - 8. Juni 2023)
  In: 2023 IEEE Wireless Power Technology Conference and Expo, WPTCE 2023 - Proceedings 2023
  DOI: 10.1109/WPTCE56855.2023.10215795
  BibTeX: Download
• Kühl A.:
  Optimized Cutting Process of Flat Wires for Electric Motors with Hairpin Technology
  2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023 (San Francisco, CA, USA, 15. Mai 2023 - 18. Mai 2023)
  In: 2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023 2023
  DOI: 10.1109/IEMDC55163.2023.10238786
  BibTeX: Download
• Mahr A., Mathea P., Vogel A., Morello A., Franke J., Kühl A.:
  Robotic based Assembly of insulating Sleeves onto Winding Coil Ends of Electric Drive Stators
  13th International Electric Drives Production Conference (E|DPC) (Regensburg, Germany, 29. November 2023 - 30. November 2023)
  DOI: 10.1109/EDPC60603.2023.10372156
  BibTeX: Download
• Raffin T., Mayr A., Baader M., Laube N., Kühl A., Franke J.:
  Potentials of few-shot learning for quality monitoring in laser welding of hairpin windings
  In: Procedia CIRP 118 (2023), S. 901-906
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2023.06.155
  BibTeX: Download
• Schmidt A., Wieprecht N., Cosack A., Janisch L., Franke J., Kühl A.:
  Systematic Qualification of Layer Thickness, Roundness and Defects of Screen-printed Magnetic Sheets
  2023 13th International Electric Drives Production Conference (EDPC) (Regensburg, 29. November 2023 - 30. November 2023)
  In: 2023 13th International Electric Drives Production Conference (EDPC) 2023
  DOI: 10.1109/EDPC60603.2023.10372126
  BibTeX: Download
• Schmidt A., Wieprecht N., Schlichting J., Denneler S., Franke J., Kühl A.:
  Process Development of Screen-Printed Magnetic Sheets for Electric Machines via Statistical Design of Experiments
  In: Metals 13 (2023)
  ISSN: 2075-4701
  DOI: 10.3390/met13111814
  BibTeX: Download
• Schmidt A., Wieprecht N., Thamm J., Kühl A., Franke J.:
  Continuous Improvement of the Screen printing Process of Magnetic Sheets for Electric Machines by Statistical Design of Experiment
  Flexible Automation and Intelligent Manufacturing Conference (FAIM) (Porto, 18. Juni 2023 - 22. Juni 2023)
  In: Francisco J. G. Silva; Luís Pinto Ferreira; José Carlos Sá; Maria Teresa Pereira; Carla M.A. Pinto (Hrsg.): Lecture Notes in Mechanical Engineering, Gewerbestrasse 11, 6330 Cham, Switzerland: 2023
  DOI: 10.1007/978-3-031-38165-2_49
  BibTeX: Download
• Schmidt A., Wieprecht N., Weinrich T., Franke J., Kühl A.:
  Multi-objective parameter optimization for stacking and sintering of screen-printed magnetic sheets
  In: Production Engineering (2023)
  ISSN: 0944-6524
  DOI: 10.1007/s11740-023-01245-z
  BibTeX: Download
• Schmidt A., Ziegler M., Franke J., Kühl A.:
  Development of Magnetic Sheets for CO2 Efficient Electric Drives Using an Additive Manufacturing Approach
  18th Global Conference on Sustainable Manufacturing, GCSM 2022 (Berlin, 5. Oktober 2022 - 7. Oktober 2022)
  In: Holger Kohl, Günther Seliger, Franz Dietrich (Hrsg.): Lecture Notes in Mechanical Engineering 2023
  DOI: 10.1007/978-3-031-28839-5_33
  BibTeX: Download
• Schmidt A., Ziegler M., Kühl A., Franke J.:
  Development of Magnetic Sheets for CO2 Efficient Electric Drives Using an Additive Manufacturing Approach
  Springer Science and Business Media Deutschland GmbH, 2023
  (Manufacturing Driving Circular Economy)
  ISBN: 9783031288388
  DOI: 10.1007/978-3-031-28839-5_33
  BibTeX: Download
• Seefried J., Wieprecht N., Franke J., Kühl A.:
  Influence of Cable Lug Properties on the Torsional Ultrasonic Crimping Process of High-Frequency Litz Wires
  13th International Electric Drives Production Conference, EDPC 2023 (Hybrid, Regensburg, DEU, 29. November 2023 - 30. November 2023)
  In: 2023 13th International Electric Drives Production Conference, EDPC 2023 - Proceedings 2023
  DOI: 10.1109/EDPC60603.2023.10372125
  BibTeX: Download
• Weigelt M., Jordan S., Manger J., Kneidl M., Masuch M., Kühl A., Franke J.:
  Manufacturing influences on transmission efficiency and thermal integration of resonant circuit modules of inductive power transmission systems for electric vehicles
  2023 IEEE Wireless Power Technology Conference and Expo, WPTCE 2023 (San Diego, CA, USA, 4. Juni 2023 - 8. Juni 2023)
  In: 2023 IEEE Wireless Power Technology Conference and Expo, WPTCE 2023 - Proceedings 2023
  DOI: 10.1109/WPTCE56855.2023.10216105
  BibTeX: Download
• Ziegler M., Schafer P., Wieprecht N., Franke J., Kühl A.:
  Investigation of Insulation Layers on Additive Manufactured Electrical Steel Laminations in Electric Motors
  In: IEEE Transactions on Dielectrics and Electrical Insulation (2023), S. 1-1
  ISSN: 1070-9878
  DOI: 10.1109/TDEI.2023.3261821
  BibTeX: Download
• von Lindenfels J., Posch D., Ihne T., Franke J., Kühl A.:
  Functionally integrated additive manufactured rotor components for torque-dense aircraft electric motors
  In: Procedia CIRP 120 (2023), S. 998-1003
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2023.09.114
  BibTeX: Download

2022

• Franke J., Weigelt M., Kneidl M., Masuch M., Kühl A.:
  Technical, Economical and Ecological Potentials of Electrified Roads
  5. Wiener Produktionstechnik Kongress (Wien, 5. Oktober 2022 - 6. Oktober 2022)
  In: Bleicher Friedrich (Hrsg.): Wiener Produktionstechnik Kongress 2022, Wien: 2022
  URL: https://www.newacademicpress.at/wp-content/uploads/asolmerce/download-1506-00_buch_wpk_2022_final_neu.pdf
  BibTeX: Download
• Gläßel T., Riedel A., Franke J., Kühl A.:
  Influence of Enameled Wire Preparation on the Laser welding of Hairpin Windings
  IEEE 67th Holm Conference on Electrical Contacts (HLM) (Tampa, FL)
  In: 2022 IEEE 67TH HOLM CONFERENCE ON ELECTRICAL CONTACTS (HLM), NEW YORK: 2022
  DOI: 10.1109/hlm54538.2022.9969767
  BibTeX: Download
• Kühl A.:
  Effects of Insulation Residues on the Contacting Process of Copper Flat Wire Connections
  IEEE 67th Holm Conference on Electrical Contacts (HLM) (Tampa, FL)
  In: 2022 IEEE 67TH HOLM CONFERENCE ON ELECTRICAL CONTACTS (HLM), NEW YORK: 2022
  DOI: 10.1109/hlm54538.2022.9969811
  BibTeX: Download
• Kühl A., Kneidl M., Seefried J., Masuch M., Weigelt M., Franke J.:
  Production Concepts for Inductive Power Transfer Systems for Vehicles
  In: Energies 15 (2022), S. 7911
  ISSN: 1996-1073
  DOI: 10.3390/en15217911
  BibTeX: Download
• Raffin T., Reichenstein T., Klier D., Kühl A., Franke J.:
  Qualitative assessment of the impact of manufacturing-specific influences on Machine Learning Operations
  In: Procedia CIRP 115 (2022), S. 136-141
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.10.063
  BibTeX: Download
• Raffin T., Reichenstein T., Werner J., Kühl A., Franke J.:
  A reference architecture for the operationalization of machine learning models in manufacturing
  In: Procedia CIRP 115 (2022), S. 130-135
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2022.10.062
  BibTeX: Download
• Riedel A., Kneidl M., Seefried J., Kühl A., Franke J.:
  Comparison of Various Manufacturing Processes for Hairpin-Stators with Different Conductor Material
  DOI: 10.1007/978-3-030-78424-9_44
  BibTeX: Download
• Riedel A., Kühl A., Franke J., Graf R., Hubert T., Bauer D.:
  Experimental Investigation of a New Manufacturing Technology for Hairpin Stators with Litz Wires
  12th International Electric Drives Production Conference, EDPC 2022 (Virtual, Online, DEU, 29. November 2022 - 30. November 2022)
  In: 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings 2022
  DOI: 10.1109/EDPC56367.2022.10019747
  BibTeX: Download
• Seefried J., Riedel A., Kühl A., Franke J.:
  Challenges and Solutions for Contacting Insulated Litz Wire Structures in the Context of Electromechanical Engineering
  DOI: 10.1007/978-3-030-78424-9_52
  BibTeX: Download
• Seefried J., Schwarz EB., Bleier F., Franke J., Bergmann JP., Kühl A.:
  Optimization of the Ultrasonic Crimping Process of High-Frequency Litz Wires by Using Process Data Monitoring
  12th International Electric Drives Production Conference, EDPC 2022 (Online, 29. November 2022 - 30. November 2022)
  In: 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings 2022
  DOI: 10.1109/EDPC56367.2022.10019751
  BibTeX: Download
• Vogel A., Morello A., Mahr A., Franke J., Kühl A.:
  Challenges in Cost-effective Automated Detection of Enameled Flat Wires in the Context of Robot-based Stator Manipulation
  2022 12th International Electric Drives Production Conference (EDPC) (Regensburg, 30. November 2022 - 1. Dezember 2022)
  DOI: 10.1109/EDPC56367.2022.10019736
  BibTeX: Download
• Ziegler M., Brandl F., Franke J., Kühl A.:
  Numerical Simulation of the Laser Welding Process for Electrical Steel Laminations
  12th International Electric Drives Production Conference, EDPC 2022 (Virtual, Online, DEU, 29. November 2022 - 30. November 2022)
  In: 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings 2022
  DOI: 10.1109/EDPC56367.2022.10019752
  BibTeX: Download
• von Lindenfels J., Ihne T., Franke J., Kühl A.:
  Electric Propulsion Units in aviation - approach for a mechanical permanent magnet rotor design and the related manufacturing concept
  12th International Electric Drives Production Conference, EDPC 2022 (Virtual, Online, DEU, 29. November 2022 - 30. November 2022)
  In: 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings 2022
  DOI: 10.1109/EDPC56367.2022.10019761
  BibTeX: Download
• von Lindenfels J., Qomi MP., Utsch D., Franke J., Kühl A., Reibenweber L., Stadler A.:
  Electromagnetic Actuators Suitable for High Temperatures Using Thin Aluminum Foil as Conductor
  12th International Electric Drives Production Conference, EDPC 2022 (Virtual, Online, DEU, 29. November 2022 - 30. November 2022)
  In: 2022 12th International Electric Drives Production Conference, EDPC 2022 - Proceedings 2022
  DOI: 10.1109/EDPC56367.2022.10019743
  BibTeX: Download

2021

• Baader M., Mayr A., Raffin T., Selzam JH., Kühl A., Franke J.:
  Potentials of Optical Coherence Tomography for Process Monitoring in Laser Welding of Hairpin Windings
  11th International Electric Drives Production Conference (EDPC) (Erlangen)
  DOI: 10.1109/EDPC53547.2021.9684210
  BibTeX: Download
• Kneidl M., Benke D., Masuch M., Kühl A., Franke J.:
  In-line Measurement Techniques of Resin-based Insulation Processes for Wireless Power Transfer Systems
  2021 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Vancouver, BC, Canada, 12. Dezember 2021 - 15. Dezember 2021)
  In: IEEE (Hrsg.): 2021 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), New York, USA: 2021
  DOI: 10.1109/CEIDP50766.2021.9705443
  URL: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9705443
  BibTeX: Download
• Kneidl M., Masuch M., Rieger D., Kühl A., Franke J.:
  Processing influences of resin-based insulation materials for wireless power transfer applications
  IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (East Rutherford, NJ, USA, 18. Oktober 2020 - 30. Oktober 2020)
  In: IEEE (Hrsg.): 2020 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), NY, USA: 2021
  DOI: 10.1109/CEIDP49254.2020.9437503
  URL: https://ieeexplore.ieee.org/document/9437503
  BibTeX: Download
• Kühl A., Franke J.:
  Improving the Inductive Crimping Technology in the Production of Electric Motors
  66th IEEE Holm Conference on Electrical Contacts (HLM) (San Antonio, TX)
  In: 2021 IEEE SIXTY-SIXTH HOLM CONFERENCE ON ELECTRICAL CONTACTS (HLM), NEW YORK: 2021
  DOI: 10.1109/hlm51431.2021.9671188
  BibTeX: Download
• Kühl A., Franke J.:
  Robot-based Forming of Hairpin Winding
  2021 IEEE International Electric Machines and Drives Conference, IEMDC 2021 (Hartford, CT, USA, 17. Mai 2021 - 20. Mai 2021)
  In: 2021 IEEE International Electric Machines and Drives Conference, IEMDC 2021 2021
  DOI: 10.1109/IEMDC47953.2021.9449576
  BibTeX: Download
• Raffin T., Mayr A., Fuchs J., Baader M., Morello A., Kühl A., Franke J.:
  A Microservice-Based Architecture for Flexible Data Acquisition at the Edge in the Context of Hairpin Stator Production
  2021 11th International Electric Drives Production Conference (EDPC) (Erlangen, 7. Dezember 2021 - 9. Dezember 2021)
  DOI: 10.1109/EDPC53547.2021.9684194
  BibTeX: Download
• Riedel A., Hahn R., Kühl A., Franke J.:
  Evaluation of different methods for removing the conductor insulation of stranded conductors
  12th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2021 (Bucharest, 25. März 2021 - 27. März 2021)
  In: 12th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2021 2021
  DOI: 10.1109/ATEE52255.2021.9425036
  BibTeX: Download
• Riedel A., Seefried J., Schmidt A., Kühl A., Franke J.:
  Experimental Setup of a Process Chain for Contacting Litz Wires for Electrical Drives
  30th International Conference on Electrical Contacts, ICEC 2020 (Virtual, 7. Juni 2021 - 11. Juni 2021)
  In: 30th International Conference on Electrical Contacts, ICEC 2020 - Proceedings 2021
  BibTeX: Download
• Seefried J., Mahr A., Weigelt M., Kühl A., Franke J.:
  Challenges of Contacting Processes for Thin Copper Flat Wires in the Context of Electromechanical Engineering
  11th International Electric Drives Production Conference (E/DPC) (, ELECTR NETWORK)
  In: 2021 11TH INTERNATIONAL ELECTRIC DRIVES PRODUCTION CONFERENCE (EDPC), NEW YORK: 2021
  DOI: 10.1109/EDPC53547.2021.9684202
  BibTeX: Download
• Seefried J., Riedel A., Lohbauer A., Baessler H., Kühl A., Franke J.:
  Influencing Factors for the Ultrasonic Compacting Process of Insulated Litz Wires for Electric Drives
  30th International Conference on Electrical Contacts, ICEC 2020 (Online, 7. Juni 2021 - 11. Juni 2021)
  In: 30th International Conference on Electrical Contacts, ICEC 2020 - Proceedings 2021
  BibTeX: Download
• Ziegler M., Brandl F., Kühl A., Franke J.:
  Evaluation of Laser-welded Electrical Steel Laminations for Electric Motors
  12th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2021 (Bucharest, 25. März 2021 - 27. März 2021)
  In: 12th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2021 2021
  DOI: 10.1109/ATEE52255.2021.9425168
  BibTeX: Download

2020

• Gläßel T., Masuch M., Weigelt M., Kühl A., Franke J.:
  Schlussbericht zu dem Teilvorhaben "Automatisierte Fertigungstechnologien zum Biegen, Montieren und Schalten von innovativen Formspulenwicklungen" im Verbundprojekt "PRO-E-Traktion"
  (2020)
  DOI: 10.5281/ZENODO.3691996
  BibTeX: Download
  (anderer)
• Gläßel T., Seefried J., Kühl A., Franke J.:
  Skinning of insulated copper wires within the production chain of hairpin windings for electric traction drives
  In: International Journal of Mechanical Engineering and Robotics Research 9 (2020), S. 163-169
  ISSN: 2278-0149
  DOI: 10.18178/ijmerr.9.2.163-169
  BibTeX: Download

2019

• Gläßel T., Seefried J., Kühl A., Franke J.:
  Skinning of Insulated Copper Wires within the Production Chain of Hairpin Windings for Electric Traction Drives
  Asia Conference on Material and Manufacturing Technology [ACMMT 2018] (Beijing, 14. September 2018 - 16. September 2018)
  In: International Journal of Mechanical Engineering and Robotics Research 2019
  DOI: 10.18178/ijmerr.9.2.163-169
  BibTeX: Download
• Gläßel T., Seefried J., Masuch M., Riedel A., Mayr A., Kühl A., Franke J.:
  Process Reliable Laser Welding of Hairpin Windings for Automotive Traction Drives
  IEEE International Conference on Engineering, Science, and Industrial Applications (ICESI) (Tokyo, Japan, 22. August 2019 - 24. August 2019)
  DOI: 10.1109/ICESI.2019.8863004
  URL: https://ieeexplore.ieee.org/document/8863004
  BibTeX: Download
• Kühl A., Riedel A., Vogel A., Hartl S., Gläßel T., Franke J.:
  Robot-based Production of Electric Motors with Hairpin Winding Technolgy
  International Conference on Intelligent Automation (ICIAR) 2019 (San Francisco, 22. Oktober 2019 - 24. Oktober 2019)
  In: Limited N (Hrsg.): International Conference on Intelligent Automation and Robotics (ICIAR'19) 2019
  BibTeX: Download
• Kühl A., Zitzelsberger M., Seefried J., Masuch M., Miller T., Franke J.:
  Hot crimping through innovative inductive heating in the production of electric motors
  11th IEEE International Electric Machines and Drives Conference, IEMDC 2019 (San Diego, CA, USA, 12. Mai 2019 - 15. Mai 2019)
  In: 2019 IEEE International Electric Machines and Drives Conference, IEMDC 2019 2019
  DOI: 10.1109/IEMDC.2019.8785316
  BibTeX: Download
• Masuch M., von Lindenfels J., Seefried J., Mayr A., Schneider M., Weigelt M., Kühl A., Franke J., Hemmer C.:
  Comparison of Additive Balancing Processes for Rotors in the Context of High Speed Electric Traction Motors
  2019 9th International Electric Drives Production Conference (E|DPC) (Esslingen, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9012036
  URL: https://ieeexplore.ieee.org/document/9012036/
  BibTeX: Download
• Mayr A., Masuch M., Kühl A.:
  Innovationen für die Elektromotorenproduktion von morgen: Von neuen Prozesstechnologien, Automatisierungslösungen bis hin zu Industrie 4.0-Ansätzen
  In: Automobiltechnologie in Bayern + e-Car 2019 (2019), S. 44-47
  URL: https://media-mind.info/pdf/2019/automobil_deutsch_2019.pdf
  BibTeX: Download
• Mayr A., Masuch M., Kühl A.:
  Innovations for the electric motor production of tomorrow: From new process technologies, automation solutions through to Industry 4.0 approaches
  In: Automobiltechnologie in Bayern + e-Car 2019 (2019), S. 36-39
  URL: https://media-mind.info/pdf/2019/automobil_engl_2019.pdf
  BibTeX: Download
• Riedel A., Roessert A., Kühl A., Franke J.:
  Calculation of the Copper Filling Factor of Electric Traction Drives including Graphical Representation
  22nd International Conference on Electrical Machines and Systems, ICEMS 2019 (Harbin, 11. August 2019 - 14. August 2019)
  In: 2019 22nd International Conference on Electrical Machines and Systems, ICEMS 2019 2019
  DOI: 10.1109/ICEMS.2019.8922428
  BibTeX: Download
• Scholz M., Kühl A., Höft A., Landgraf M., Schneider M., Böhm R., Badel G., Lothes G., Angerer K., Hohmann A., Simon P., Konwitschny F., Scharmer V., Deß T., Mehlmann G., Veerashekar K.:
  StroMiS - Studie zur technisch-wirtschaftlichen Analyse der Stromerzeugung aus Mikrokraftwerken in Serienfertigung
  (2019)
  DOI: 10.25593/opus4-fau-11334
  BibTeX: Download
  (anderer)
• Seefried J., Gläßel T., Kühl A., Mayr A., Franke J.:
  Experimental Evaluation of Tool Geometries for the Ultrasonic Crimping Process for Tubular Cable Lugs
  2019 IEEE Holm Conference on Electrical Contacts (Milwaukee, WI, USA, 14. September 2019 - 18. September 2019)
  In: 2019 IEEE Holm Conference on Electrical Contacts 2019
  DOI: 10.1109/HOLM.2019.8923709
  URL: https://ieeexplore.ieee.org/document/8923709
  BibTeX: Download
• Weigelt M., Kink J., Mayr A., von Lindenfels J., Kühl A., Franke J.:
  Digital Twin of the Linear Winding Process Based on Explicit Finite Element Method
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011857
  URL: https://ieeexplore.ieee.org/document/9011857
  BibTeX: Download
• Weigelt M., Mayr A., Kühl A., Franke J.:
  Methodical Comparison of Alternative Powertrain Technologies for Long-Distance Mobility Using Germany as an Example
  In: WEVJ (World Electric Vehicle Journal), 2019, S. 1-20
  DOI: 10.3390/wevj10040077
  URL: https://www.mdpi.com/2032-6653/10/4/77
  BibTeX: Download
• Ziegler M., Biburger M., Kühl A., Franke J.:
  Influences of joining process parameters on stator and rotor cores for electric drives
  16th International Conference on Electrical Machines, Drives and Power Systems, ELMA 2019 (Varna, 6. Juni 2019 - 8. Juni 2019)
  In: 2019 16th Conference on Electrical Machines, Drives and Power Systems, ELMA 2019 - Proceedings 2019
  DOI: 10.1109/ELMA.2019.8771687
  BibTeX: Download
• Ziegler M., Mayr A., Seefried J., Kühl A., Franke J.:
  Potentials of Process Monitoring During Laser Welding of Electrical Steel Laminations
  2019 9th International Electric Drives Production Conference (EDPC) (Esslingen, Germany, 3. Dezember 2019 - 4. Dezember 2019)
  In: 2019 9th International Electric Drives Production Conference (EDPC) 2019
  DOI: 10.1109/EDPC48408.2019.9011918
  URL: https://ieeexplore.ieee.org/document/9011918
  BibTeX: Download
• von Lindenfels J., Ziegler M., Kneidl M., Kühl A., Franke J.:
  Challenges in bonding processes in the production of electric motors
  9th Congress of the German Academic Association for Production Technology (WGP) (Hamburg, 30. September 2019 - 2. Oktober 2019)
  In: Wulfsberg, Jens P., Hintze, Wolfgang, Behrens, Bernd-Arno (Hrsg.): Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Berlin: 2019
  DOI: 10.1007/978-3-662-60417-5
  URL: https://www.springer.com/gp/book/9783662604168#aboutBook
  BibTeX: Download

2018

• Gläßel T., Baat F., Schwinghammer D., Seefried J., Kühl A., Franke J.:
  Infrared laser based contacting of bar-wound windings in the field of electric drives production
  10th CIRP Conference on Photonic Technologies [LANE 2018] (Fuerth, 3. September 2018 - 6. September 2018)
  In: M. Schmidt, F. Vollertsen, G. Dearden (Hrsg.): Procedia CIRP, Volume 74 2018
  DOI: 10.1016/j.procir.2018.08.005
  BibTeX: Download
• Kühl A., Kreitlein S., Höft A., Franke J.:
  Energy efficient processes of electric motor manufacturing
  Texas Power and Energy Conference (TPEC) (Texas A&M, College Station, TX, USA, 8. Februar 2018 - 9. Juni 2018)
  In: 2018 IEEE Texas Power and Energy Conference (TPEC) 2018
  DOI: 10.1109/TPEC.2018.8312076
  BibTeX: Download
• Kühl A., Mayr A., Masuch M.:
  Produktionstechnologien für die Antriebe der Zukunft: Anwendungsorientierte Forschung am E|Drive-Center des Lehrstuhls FAPS in Nürnberg
  In: Automobiltechnologie in Bayern + e-Car 2018 (2018), S. 42–45
  URL: https://media-mind.info/pdf/2018/auto_deutsch_2018-19.pdf
  BibTeX: Download
  (anderer)
• Mayr A., Weigelt M., Kühl A., Grimm S., Erll A., Potzel M., Franke J.:
  Lean 4.0 - A conceptual conjunction of lean management and Industry 4.0
  51st CIRP Conference on Manufacturing Systems (Stockholm, Sweden, 16. Mai 2018 - 18. Mai 2018)
  In: Procedia CIRP, Volume 72 2018
  DOI: 10.1016/j.procir.2018.03.292
  URL: https://www.sciencedirect.com/science/article/pii/S2212827118304736
  BibTeX: Download
• Mayr A., Weigelt M., von Lindenfels J., Seefried J., Ziegler M., Mahr A., Urban N., Kühl A., Hüttel F., Franke J.:
  Electric Motor Production 4.0 – Application Potentials of Industry 4.0 Technologies in the Manufacturing of Electric Motors
  8th International Electric Drives Production Conference (EDPC) (Schweinfurt, 4. Dezember 2018 - 5. Dezember 2018)
  DOI: 10.1109/EDPC.2018.8658294
  URL: https://ieeexplore.ieee.org/document/8658294
  BibTeX: Download
• Riedel A., Masuch M., Weigelt M., Gläßel T., Kühl A., Reinstein S., Franke J.:
  Challenges of the Hairpin Technology for Production Techniques
  2018 21st International Conference on Electrical Machines and Systems (ICEMS) (Jeju, 7. Oktober 2018 - 10. Oktober 2018)
  DOI: 10.23919/ICEMS.2018.8549105
  URL: https://ieeexplore.ieee.org/document/8549105
  BibTeX: Download
• Urban N., Kühl A., Glauche M., Franke J.:
  Additive Manufacturing of Neodymium-Iron-Boron Permanent Magnets
  In: 2018 8th International Electric Drives Production Conference (EDPC) 2018
  DOI: 10.1109/EDPC.2018.8658348
  BibTeX: Download
• Weigelt M., Masuch M., Mayr A., Seefried J., Kühl A., Franke J.:
  Automated and Flexible Production of Inductive Charging Systems as an Enabler for the Breakthrough of Electric Mobility
  In: Schmitt, Robert; Schuh, Günther (Hrsg.): Advances in Production Research, Cham: Springer International Publishing, 2018, S. 300–309
  DOI: 10.1007/978-3-030-03451-1_30
  URL: https://link.springer.com/chapter/10.1007/978-3-030-03451-1_30
  BibTeX: Download
• Weigelt M., Mayr A., Böhm R., Kühl A., Franke J.:
  Quo vehis, Electromobility?
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 113 (2018), S. 59-63
  ISSN: 0932-0482
  DOI: 10.3139/104.111863
  URL: https://www.hanser-elibrary.com/doi/abs/10.3139/104.111863
  BibTeX: Download
• Weigelt M., Mayr A., Böhm R., Kühl A., Franke J.:
  Quo vehis, Elektromobilität?
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 113 (2018), S. 59-63
  ISSN: 0932-0482
  DOI: 10.3139/104.111863
  URL: http://www.hanser-elibrary.com/doi/pdf/10.3139/104.111863
  BibTeX: Download
• Weigelt M., Mayr A., Kühl A., Batz K., Bican P., Russer JA., Russer P., Franke J.:
  Techno-Economic Evaluation of Technological Alternatives to Extend the Range of Electric Vehicles
  5th Annual Conference on Electric Roads & Vehicles (Park City, Utah, 26. Februar 2018 - 27. Februar 2018)
  BibTeX: Download
  (anderer)

2017

• Kühl A., Furlan S., Gutmann J., Meyer M., Franke J.:
  Technologies and processes for the flexible robotic assembly of electric motor stators
  2017 IEEE International Electric Machines and Drives Conference (IEMDC) (Miami, FL, 21. Mai 2017 - 24. Mai 2017)
  In: 2017 IEEE International Electric Machines and Drives Conference (IEMDC) 2017
  DOI: 10.1109/IEMDC.2017.8002245
  BibTeX: Download

2016

• Kreitlein S., Hofmann B., Meyer AW., Spreng S., Kühl A., Franke J.:
  Strategies and Methods for the Energy Efficient Production of Electric Drives
  23rd CIRP Conference on Life Cycle Engineering, LCE 2016 (Berlin, DEU, 22. Mai 2016 - 24. Mai 2016)
  In: Gunther Seliger, Jorg Kruger (Hrsg.): Procedia CIRP 2016
  DOI: 10.1016/j.procir.2016.03.244
  BibTeX: Download
• Kühl A., Franke J., Lebender J.:
  Robotic-based Automatization of Handling and Contacting of the Ends of Windings for the Mounting of Electric Drives
  WCECS 2016 - World Congress on Engineering and Computer Science 2016 (Berkeley, CA, 19. Oktober 2016 - 21. Oktober 2016)
  In: Engineers IA (Hrsg.): WCECS 2016 - World Congress on Engineering and Computer Science 2016 2016
  BibTeX: Download
• Kühl A., Lebender J., Franke J.:
  Robotic automatization of handling and contacting the ends of windings for mounting electric drives
  2016 World Congress on Engineering and Computer Science, WCECS 2016 (San Francisco, CA, USA, 19. Oktober 2016 - 21. Oktober 2016)
  In: Warren S. Grundfest, Craig Douglas, S. I. Ao (Hrsg.): Lecture Notes in Engineering and Computer Science 2016
  BibTeX: Download
• Meyer AW., Heyder A., Kühl A., Sand C., Gehb H., Abersfelder S., Franke J., Holzhey R., Buettner U., Wangemann S.:
  Concept for Magnet Intra Logistics and Assembly Supporting the Improvement of Running Characteristics of Permanent Magnet Synchronous Motors
  14th CIRP Conference on Computer Aided Tolerancing, CAT 2016 (Gothenburg, 18. Mai 2016 - 20. Mai 2016)
  In: Rikard Soderberg (Hrsg.): Procedia CIRP 2016
  DOI: 10.1016/j.procir.2016.02.133
  BibTeX: Download

2015

• Bickel B., Mahr A., Kühl A., Franke J., Meixner S., Berendt E., Riedel A.:
  Implementation of the Needle Winding Technique for Diamond Coils
  5th International Electric Drives Production Conference (Nuremberg, 16. September 2015 - 16. September 2015)
  DOI: 10.1109/EDPC.2015.7323198
  BibTeX: Download
• Hofmann B., Spreng S., Kühl A., Franke J.:
  Evaluation of economic and ecologic potential of induction heating in the context of insulation systems within electric drives
  IEEE Electrical Insulation Conference (Seattle, WA, 7. Juni 2015 - 8. Juni 2015)
  BibTeX: Download
• Kühl A., Franke J.:
  Innovative Assembly of Stators using Ambidextrous Kinematics
  WCECS 2015 - World Congress on Engineering and Computer Science 2015 (Berkeley, CA, 21. Oktober 2015 - 23. Oktober 2015)
  In: Engineers IA (Hrsg.): WCECS 2015 - World Congress on Engineering and Computer Science 2015 2015
  BibTeX: Download

2014

• Kühl A.:
  Flexible Automatisierung der Statorenmontage mit Hilfe einer universellen ambidexteren Kinematik: Dissertation
  Bamberg: Meisenbach, 2014
  (Fertigungstechnik - Erlangen, Bd.251)
  ISBN: 987-3-87525-367-2
  BibTeX: Download
• Kühl A., Franke J.:
  Robot-Based Assembly of Cover-Plates
  EMCW Expo 2014 (Milwaukee, WI, 14. Mai 2014 - 15. Mai 2014)
  In: EMCWA (Hrsg.): EMCW Expo 2014
  BibTeX: Download
• Kühl A., Höft A., Franke J.:
  Robot-Based Assembly of Stators – Methods and Tools to Assembly Windings and Coverplates Robotergestützte Montage von Elektromotorstatoren: Methoden und Werkzeuge zur Montage von Wicklungen und Deckschiebern
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 109 (2014), S. 310-313
  ISSN: 0932-0482
  DOI: 10.3139/104.111145
  BibTeX: Download

2013

• Kühl A., Franke J.:
  Robot-based assembly of stators
  2013 3rd International Electric Drives Production Conference, EDPC 2013 (Nuremberg, 29. Oktober 2013 - 30. Oktober 2013)
  DOI: 10.1109/EDPC.2013.6689754
  BibTeX: Download
• Kühl A., Franke J.:
  Robot-based assembly of stator-windings Roboterbasierte Wicklungsmontage: Flexible Statormontage unter Anwendung ambidexterer Kinematiken
  In: wt Werkstattstechnik - Online 103 (2013), S. 649-655
  ISSN: 1436-4980
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85026887941&origin=inward
  BibTeX: Download
• Kühl A., Günther S., Franke J.:
  Robot-based assembly of stator-windings
  Electrical Manufacturing and Coil Winding Expo 2010-2013 (Milwaukee, WI, 8. Mai 2013 - 8. Mai 2013)
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84894208287&origin=inward
  BibTeX: Download

2011

• Franke J., Dobroschke A., Tremel J., Kühl A.:
  Innovative processes and systems for the automated manufacture, assembly and test of magnetic components for electric motors
  1st International Electric Drives Production Conference, EDPC-2011 (Nuremberg)
  DOI: 10.1109/EDPC.2011.6085564
  BibTeX: Download
• Franke J., Tremel J., Kühl A.:
  Innovative developments for automated magnet handling and bonding of rare earth magnets
  2011 IEEE International Symposium on Assembly and Manufacturing, ISAM 2011 (Tampere)
  DOI: 10.1109/ISAM.2011.5942323
  BibTeX: Download
• Kühl A., Alvarez C., Franke J.:
  Simulation supported parameterization of reflow soldering processes Simulationsünterstutzte Parametrierung von Reflowlotprozessen
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 106 (2011), S. 143-146
  ISSN: 0932-0482
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-79955704139&origin=inward
  BibTeX: Download
• Risch F., Kühl A., Franke J.:
  Production processes for wireless charging infrastructure. A large-scale market introduction of electric powered vehicles is still opposed by many barriers Produktionsprozesse für kontaktlose Ladeinfrastrukturen: Kosteneffiziente Produktion und Integration von Systemen zur kontaktlosen Übertragung von Energie in stationäre und bewegte Elektrofahrzeuge
  In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 106 (2011), S. 361-365
  ISSN: 0932-0482
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-79959576166&origin=inward
  BibTeX: Download

2010

• Kühl A., Franke J.:
  Thermische Simulation von Werkzeugmaschinen zur Verbesserung der Fertigungsgenauigkeiten: Thermal simulation of machine tools for the advancement of the production accuracy
  14. ASIM-Fachtagung "Simulation in Produktion und Logistik" (Karlsruhe, 7. Oktober 2010 - 8. Oktober 2010)
  In: Zülch G, Stock P (Hrsg.): Integrationsaspekte der Simulation, Karlsruhe: 2010
  URL: http://digbib.ubka.uni-karlsruhe.de/volltexte/documents/1479461
  BibTeX: Download